Teltonika Telematics FTC921 Guía de instalación
FTC921
Small and smart tracker
Quick Manual v1.5
Quick Manual v1.5 // FTC921 2
CONTENT
Know your device................................................................................................................................................................................................3
Pinout ...................................................................................................................................................................................................................4
Wiring scheme.....................................................................................................................................................................................................5
Set up your device ..............................................................................................................................................................................................6
How to install USB drivers (Windows) ..............................................................................................................................................................7
PC Connection (Windows)..................................................................................................................................................................................7
Conguration (Windows) ...................................................................................................................................................................................8
Quick SMS conguration....................................................................................................................................................................................9
Mounting recommendations.......................................................................................................................................................................... 10
Basic characteristics ........................................................................................................................................................................................ 11
LED indications................................................................................................................................................................................................. 11
Safety information .......................................................................................................................................................................................... 14
Certication and Approvals ............................................................................................................................................................................ 15
Warranty ........................................................................................................................................................................................................... 17
Warranty disclaimer......................................................................................................................................................................................... 17
Quick Manual v1.5 // FTC921 3
KNOW YOUR DEVICE
1X5
SOCKET
STATUS
LED
NAVIGATE
LED
SIM
SLOT
BATTERY
SOCKET
GNSS
ANTENA
TOP VIEW TOP VIEW (WITHOUT COVER)BOTTOM VIEW (WITHOUT COVER)
Quick Manual v1.5 // FTC921 4
PIN NUMBER PIN NAME DESCRIPTION
1 VCC (10-90) VDC (+) (Red) Power supply
(+10-90 V DC)
2 GND (-) (Black) Ground
3 DIN1
(Yellow) Digital input,
channel 1. DEDICATED
FOR IGNITION INPUT
4AIN1
(Grey) Analog input,
channel 1. Input range:
0-90 V DC
5DOUT1
(White) Digital output.
Open collector output.
Max. 0,5 A DC
PINOUT
2
3
4
5
1
+10...90 V DC
GND
AIN1
DOUT1
DIN1
FTC921 pinout
Quick Manual v1.5 // FTC921 5
WIRING SCHEME
BUZZER
30
8586
87a
87
IGNITION
DETECTION
FUEL GAUGE
STARTER
ANALOG
LLS SENSOR
ALARM BUTTON
DOOR SENSOR
POWER SUPPLY
10 - 30V DC
WIRING SCHEMEFMM920
2
3
4
5
1
+10...90 V DC
GND
AIN1
DIN1
DOUT1
Quick Manual v1.5 // FTC921 6
SET UP YOUR DEVICE
HOW TO INSERT MICRO-SIM CARD AND CONNECT THE BATTERY
1
4
COVER REMOVAL
BATTERY CONNECTION
3SIM CARD INSERT
2
5
COVER REMOVAL
DEVICE IS READY
You will receive your device fully closed.
Connect battery by pressing connector
rmly to socket, ensure that both sides
of connector locks properly.
Gently remove side cover.
Device is ready to be mounted.
Insert SIM card as shown. Make sure
Nano-SIM card cut-o corner is pointing
towards SIM slot.
Quick Manual v1.5 // FTC921 7
PC CONNECTION
(WINDOWS)
HOW TO INSTALL USB
DRIVERS (WINDOWS)
1. Please download COM port drivers from here1.
2. Extract and run TeltonikaCOMDriver.exe.
3. Click Next in driver installation window.
4. In the following window click Install button.
5. Setup will continue installing the driver and eventually the
conrmation window will appear. Click Finish to complete
the setup.
1 wiki.teltonika-gps.com/images/d/d0/TeltonikaCOMDriver.zip
1. Power-up FTC921 with DC voltage (10-90V) power supply
using power wires. LEDs should start blinking.
2. Connect device to computer using Micro-USB cable
and install USB driver, see “How to install USB drivers
(Windows)1”
1 Page 6, "How to install USB drivers"
Quick Manual v1.5 // FTC921 8
After connection Device status window will be loaded with
device, GNSS and Cellular information.
Most important congurator section is GPRS – where all
your server and GPRS settings can be congured and Data
Acquisition – where data collecting parameters can be setu p.
More details about FTC921 conguration using TCT can be fnd
on our Wiki1.
1 wiki.teltonika-gps.com/view/FTC921_Conguration
Save to device – saves conguration to device.
Upload le – loads conguration from le.
Save to le – saves conguration to le.
Update – update device rmware.
Reset conguration – sets device conguration
to default.
MS .NET
REQUIREMENTS
Operating
system
MS .NET
Framework
version
Version Links
Windows
Vista
Windows 7
Windows 8.1
Windows 10
MS .NET
Framework
4.6.2
32 and 64 bit www.microsoft.com1
1 dotnet.microsoft.com/en-us/download/dotnet-framework/net462
At rst FTC921 device will have default factory settings set.
These settings should be changed according to the user's
needs. Main conguration can be performed via Teltonika
Congurator tool1 (TCT).
1/wiki.teltonika-gps.com/view/FTC921
CONFIGURATION
(WINDOWS)
Downloaded Telematics Conguration Tool (TCT) setup
le will be in compressed archive, extract it and launch
TelematicsCongurationTool.Setup.exe
Once TCT is installed, launch it and you will see connected
devices, press congure.
Quick Manual v1.5 // FTC921 9
QUICK SMS CONFIGURATION
Default conguration has optimal parameters present to ensure best performance of track quality and data usage.
Quickly set up your device by sending this SMS command to it:
Note: Before SMS text, one space symbols should be inserted.
GPRS SETTINGS:
2001 – APN
2002 – APN username (if there are no APN username,
empty eld should be left)
2003 – APN password (if there are no APN password,
empty eld should be left)
SERVER SETTINGS:
2004 – Domain
2005 – Port
2006 – Data sending protocol (0 – TCP, 1 – UDP)
« setparam 2001:APN;2002:APN_username;2003:APN_password;2004:Domain;2005:Port;2006:0»
1 2 3 4 5 6
1
2
3
4
5
6
Quick Manual v1.5 // FTC921 10
MOUNTING RECOMMENDATIONS
CONNECTING WIRES
• Wires should be fastened to stable wires or other non-
moving parts. Any heat emitting and/or moving objects
should be kept away from the wires.
• There should be no exposed wires. If factory isolation was
removed while connecting wires, the isolation material
should be applied.
• If the wires are placed in the exterior or in places where
they can be damaged or exposed to heat, humidity, dirt,
etc., additional isolation should be applied and the wires
should not be loose.
• Wires cannot be connected to the board computers or
control units.
CONNECTING POWER SOURCE
• Be sure that after the car computer goes to sleep mode,
power might be still available on the power wires.
Depending on car, this may happen in 5 to 30 minutes
period.
• When module is connected, measure voltage again to
make sure it did not decrease.
• It is recommended to connect to the main power cable in
the fuse box.
• 3 A, 125 V external fuse shall be used.
CONNECTING IGNITION WIRE
• Be sure to check if it is a real ignition wire i. e. power does
not disappear after starting the engine.
• Check if this is not an ACC wire (when key is in the rst
position, most of the vehicle electronics are available).
• Check if power is still available when you turn o any of
vehicles devices.
• Ignition is connected to the ignition relay output. As
alternative, any other relay, which has power output when
ignition is on, may be chosen.
CONNECTING GROUND WIRE
• Ground wire is connected to the vehicle frame or metal
parts that are xed to the frame.
• If the wire is xed with the bolt, the loop must be connected
to the end of the wire.
• For better contact scrub paint from the spot where loop is
going to be connected.
CAUTION! Caution statements are a
description of situations where a non-
immediate or potential hazard presents
a lesser threat of injury that could result
in minor or moderate injuries to workers
and/or the general public.
Otros manuales para Telematics FTC921
2
Tabla de contenidos
Otros manuales de GPS de Teltonika
Teltonika
Teltonika GH1201 Manual de usuario
Teltonika
Teltonika FMC225 Manual de usuario
Teltonika
Teltonika FM1110 Manual de usuario
Teltonika
Teltonika FMC640 Guía de instalación
Teltonika
Teltonika FMB2 Manual de usuario
Teltonika
Teltonika FMB125 Guía de instalación
Teltonika
Teltonika Telematics FTC921 Manual de usuario
Teltonika
Teltonika FMB910 Guía de instalación
Teltonika
Teltonika TAT100 Manual de usuario
Teltonika
Teltonika FM6300 Manual de usuario
Teltonika
Teltonika FM6 Guía de seguridad
Teltonika
Teltonika FM4200 Manual de usuario
Teltonika
Teltonika Telematics FMC150 Guía de instalación
Teltonika
Teltonika FMC130+ETC Manual de usuario
Teltonika
Teltonika FMM80A Guía de instalación
Teltonika
Teltonika FMB001 Guía de instalación y uso
Teltonika
Teltonika FMB910 Manual de usuario
Teltonika
Teltonika FMC230 Guía de instalación
Teltonika
Teltonika FMB125 Manual de usuario
Teltonika
Teltonika TMT250 Guía de instalación
