Teledyne T3SP Series Manual de usuario

Operator’s Manual

T3SP-Series Time Domain

Reectometer

T3SP-Series Operator’s Manual

Revision B - October 2019

Relang to the following release versions:

Soware Version Rev. 1.6.0

change without noce. Product brand or brand names are trademarks or

requested trademarks of their respecve holders.

T3 stands for Teledyne Test Tools.

931776 RevB

T3SP-Series Operator’s Manual

Contents

1 General Information about the T3SP Series 6

1.1 Intended Applicaon . . . . . . . . . . . . . . . . . . . . . . 6

1.2 Disclaimer............................ 6

1.3 Contents of packing . . . . . . . . . . . . . . . . . . . . . . 6

2 Commissioning 8

2.1 GeneralRemarks........................ 8

2.2 Soware Conguraon File . . . . . . . . . . . . . . . . . . 8

2.3 SowareStartup........................ 9

2.4 Power Supply & USB Connecon . . . . . . . . . . . . . . . 9

2.5 Descripon of the Applicaon Windows . . . . . . . . . . . 10

2.5.1 MainWindow ..................... 10

2.5.2 Oscilloscope Window . . . . . . . . . . . . . . . . . 11

2.5.3 Result Visualizaon Window . . . . . . . . . . . . . 13

2.5.4 Opons Dialog . . . . . . . . . . . . . . . . . . . . . 17

2.6 Soware Operaon Modes . . . . . . . . . . . . . . . . . . 20

2.6.1 Sample List Operaon Mode . . . . . . . . . . . . . 20

2.6.2 Macro Operaon Mode . . . . . . . . . . . . . . . . 20

2.6.3 Quick Operaon Mode . . . . . . . . . . . . . . . . 22

2.7 Login with limited User Privileges . . . . . . . . . . . . . . . 23

3 Quick Start Guide 24

4 Three-Term & 12-Term Correction 30

4.1 Fundamentals ......................... 30

4.2 Requirements.......................... 30

4.3 Calibraon Wizard . . . . . . . . . . . . . . . . . . . . . . . 31

4.4 General Remarks on reloading TTC/12TC Data . . . . . . . . 32

4.5 Status Indicators for TTC & 12TC . . . . . . . . . . . . . . . . 34

931776 RevB

T3SP-Series Operator’s Manual

5 Measurement Modes 35

5.1 Impedance Measurements (Modes TDR & DTDR) . . . . . . 35

5.1.1 General Recommendaons . . . . . . . . . . . . . . 35

5.1.2 Reference Measurement . . . . . . . . . . . . . . . 38

5.1.3 Impedance Measurement Properes Window . . . . 39

5.1.4 User-dened Impedance Masks . . . . . . . . . . . 44

5.2 (D)S11 - Measurement Mode . . . . . . . . . . . . . . . . . 45

5.3 Full 2-Port S-Parameter Measurements (F2P, oponal) . . . . 47

6 Import & Export Modules 49

6.1 PDF-Export Module . . . . . . . . . . . . . . . . . . . . . . 49

6.2 CSV-Export Module . . . . . . . . . . . . . . . . . . . . . . . 50

6.3 Touchstone-Export . . . . . . . . . . . . . . . . . . . . . . . 51

6.4 Matlab-Export ......................... 51

7 Workshop Files 52

8 ESD-Protection Module 53

9 Additional Information 54

9.1 Descripon of the Toolbar Items in the Main Window . . . . 54

9.2 Descripon of the Toolbar Items in the Result Window . . . 55

9.3 Descripon of the Main Window Menu Items . . . . . . . . 56

9.4 Keyboard Shortcuts . . . . . . . . . . . . . . . . . . . . . . 61

10 Technical Specications 63

10.1 T3SP-Series Mainframes . . . . . . . . . . . . . . . . . . . . 63

10.2T3SP-DPROBE.......................... 64

10.3T3SP-DPROBE-F......................... 64

11 Troubleshooting 65

931776 RevB

T3SP-Series Operator’s Manual

12 Safety Instructions 67

12.1 Operang Environment . . . . . . . . . . . . . . . . . . . . 67

12.2Power.............................. 67

12.3 Safety Symbols & Terms . . . . . . . . . . . . . . . . . . . . 68

12.4 Safety Requirements . . . . . . . . . . . . . . . . . . . . . . 68

13 Maintenance 70

931776 RevB

T3SP-Series Operator’s Manual

1. General Informaon about the T3SP Series

The T3SP series is developed to perform true dierenal TDR measurement.

Complementary step signals with an ultra-wide bandwidth are emied and

acquired by the instrument. The signals are applicable to external compo-

nents via the coaxial connectors.

Please read this operaon manual carefully before commissioning the T3SP,

to avoid incorrect operaon of the instrument. Keep this manual carefully

the enre life-me of the instrument. Subsequently the T3SP TDR is gener-

ally described as ”device”.

1.1 Intended Application

The device is exclusively intended for usage in conjuncon with the deliv-

ered soware. Upon request soware libraries are available to integrate

the device control into other soware environments. Beware of using the

device for purposes other than intended!

1.2 Disclaimer

Warranty or liability claims for personal or property injury are excluded if

they are caused by one or more of the following reasons:

•Usage of the device for other purposes as described in this manual

•Disregarding the instrucons for correct operaon of the device

•Disregarding the safety instrucons listed in this operaon manual

•Opening of the instrument by the customer or user

1.3 Contents of packing

•T3SP me-domain reectometer

931776 RevB

T3SP-Series Operator’s Manual

•USB 2.0 cable, Mini USB-B to USB-A

•External power supply: input 100-240VAC, output 24VDC, max. 3A

•Seunis installation program

•Integrated ESD-protection module

•Metal or plastic storage and transport case (optional)

•ESD-protection kit

•Cable(s), probe(s), adapters(s) (optional)

•Calibration Kit including RF connector torque wrench (optional)

931776 RevB

T3SP-Series Operator’s Manual

2. Commissioning

Before the rst start of operaon you have to install the provided soware

(on old Windows XP systems also the USB-driver has to be installed). Please

follow the installaon instrucons given by the soware.

2.1 General Remarks

The Seunis measurement soware was designed to make series measure-

ments and therefore the central element of the main window is a spreadsheet-

like table. For a beer understanding, some regularly used terms are de-

ned below:

Sample Describes the individual objects/devices under

test (DUT)

Sample List Collecon of samples in the spreadsheet table

(D)TTC =

(Dierenal)

Three-Term

Correcon

Error correcon method, removes systemac

device & external cable/connector errors

12TC = Twelve

Term Correcon

Error correcon method for full 2-port

S-parameter measurements. Only used if full

2-port measurement mode is available

Measurement

Modes

The soware is capable of measuring various

parameters (impedance, S11, etc.). These

funconalies are called measurement modes

2.2 Software Conguration File

Some specialized opons & funconalies can be modied via the soware

conguraon le Seunis.cong. The default locaon of the conguraon

le can be found via Seunis in the Windows start menu. For proper use on

931776 RevB

T3SP-Series Operator’s Manual

mul-user systems the locaon of the conguraon le can be changed via

the Opons Dialog (see secon 2.5.4).

2.3 Software Startup

The device must be turned on to operate the device, because the soware

queries the device for available measurement modes. Alternavely the so-

ware can be started with the Teledyne Viewer Key.

2.4 Power Supply & USB Connection

To enable measurements, connect the USB port of the instrument to a com-

puter. Please follow the instrucons given below:

•If available plug the Mini-USB-B plug connector of the USB-cable into

the corresponding USB-jack connector of the device and the USB-A

plug into an USB-port of your computer.

•Turn on the device by pressing the power buon for more than 1 sec-

ond. Aer a few seconds, the buon LED changes from green to red.

The device can be turned o by pressing the power buon for more

than 3 seconds.

•The 2-state red-green LED signals have the following meaning:

Green blinking LED: Device switched o, baery charging acve

Red blinking LED: Device switched on, baery charging acve

Red permanent LED: Device switched on, baery charging nished

•The soware will automacally probe your USB ports to communicate

with the device. You can check if this was successful in the status bar

on the boom of the main window, which shows whether the device

is Connected or Not connected.

•If the connecon to the device failed, retry to connect by pressing

931776 RevB

T3SP-Series Operator’s Manual

CTRL-U or via the menu Extras. If you are not able to establish a con-

necon, check the USB-drivers in your device manager.

•Like other RF-measurement systems, the device needs some me to

warm-up for performing stable and accurate measurements. During

the warm-up phase, measurements are prohibited. If the tempera-

ture is stable, the status bar shows OK. If you try to measure during

the warm-up phase, the measurement is aborted, accompanied by an

audio warning and the nocaon Device temperature instable.

2.5 Description of the Application Windows

2.5.1 Main Window

Fig. 1: Main Window with sample list and control elements

931776 RevB

Otros manuales para T3SP Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de Teledyne

Teledyne

Teledyne GFC7001T Manual de usuario

Teledyne

Teledyne PS200 Series Manual

Teledyne

Teledyne AX300 Manual de usuario

Teledyne

Teledyne HVG-2020B Manual de usuario

Teledyne

Teledyne Everywhereyoulook T3PM1100 Manual de usuario

Teledyne

Teledyne T300 Manual de usuario

Teledyne

Teledyne 4220 Instrucciones de funcionamiento

Teledyne

Teledyne 3000TA Guía de instalación y uso

Teledyne

Teledyne T3SA3000-NFP Manual de usuario

Teledyne

Teledyne TED 191 Manual de usuario

Teledyne

Teledyne GFC7000EU Manual de usuario

Teledyne

Teledyne HASTINGS Everywhereyoulook 200 Series Manual de usuario

Teledyne

Teledyne WIRELESS GROUNDLINK WQAR Manual de usuario

Teledyne

Teledyne SP-F-SIM Manual de usuario

Teledyne

Teledyne HASTINGS HFM-300 Manual de usuario

Teledyne

Teledyne 465L Manual de usuario

Teledyne

Teledyne CP Series Manual de usuario

Teledyne

Teledyne PS200-LMP Manual de usuario

Teledyne

Teledyne HVD3102 Manual de usuario

Teledyne

Teledyne 212R Manual de usuario

Teledyne

Teledyne T3CP30-50 Manual de usuario

Teledyne

Teledyne 4250 Instrucciones de funcionamiento

Teledyne

Teledyne Kibra DDR Manual de usuario

Teledyne

Teledyne SeaBat T Series Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario