Teledyne 3000MA Manual de usuario

Addendum for Model 3000MA Percent Oxygen Analyzer

Page 1

Teledyne Analytical Systems

Q002870 C.O. 85723

The instruction manual included with your analysis system from

Teledyne Analytical Instruments describes the standard features of

the system. Refer to the manual for information regarding all

standard features of the model that you have selected.

In addition, your specific system has been designed according to the

needs that you specified at the time of purchase. The information

contained in this addendum addresses those needs and supersedes

any conflicting instructions and descriptions in the standard

instruction manual.

NOTE: All drawings that relate to your system are at the rear of

this manual.

System Overview

The Model 3000MA Percent Oxygen Analyzer is configured with a

Paramagnetic sensor and auto cal valves. This instrument has a

general purpose area class.

Power Requirements

This instrument operates from a power source of 220 VAC at 50/60

Hz.

Analysis Range

The Model 3000MA has three user defined analysis ranges of 0-5 to

0-100 Percent Oxygen (O2).

Signal Outputs

This Model 3000MA has a signal output of 4-20mA isolated.

Additional Operating

instructions and/or

information for your

Model 3000MA

Percent Oxygen

Analyzer

Addendum for Model 3000MA Percent Oxygen Analyzer

Page 2

Teledyne Analytical Systems

Software

The software for this instrument adds hold timers for span and zero

calibration; each calibration has its own timer separate timer.

Span Delay:

By pressing the Span key, the operator accesses the setup mode of

the span calibration. After selecting AUTO span calibration the

following screen will be the hold timer adjustment:

Span Delay: 5 min.

<ENT> For Next

The hold time for the span can be adjusted between 1 minute and 60

minutes. Five minutes is the factory default. When changed the value

is stored so it can be recovered after power down.

Zero Delay:

By pressing the Zero key, the operator accesses the setup mode of

the zero calibration. After selecting AUTO zero calibration the

following screen will be the hold timer adjustment:

Zero Delay: 5 min.

<ENT> For Next

The hold time for the span can be adjusted between 1 minute and 60

minutes. Five minutes is the factory default. When changed the value

is stored so it can be recovered after power down.

Reference Drawings

D74505 Outline Diagram

B74504 Piping Diagram

Spare Parts

A78648 EPROM Software Assembly

Project Engineer ________________ Date ______________

Otros manuales para 3000MA

Tabla de contenidos

Otros manuales de Instrumento analítico de Teledyne

Teledyne

Teledyne 328 Manual de usuario

Teledyne

Teledyne 3020M Manual de usuario

Teledyne

Teledyne PEM 9002 Manual de usuario

Teledyne

Teledyne 3000MB Manual de usuario

Teledyne

Teledyne 3010MB Manual de usuario

Teledyne

Teledyne 3010PA Manual de usuario

Teledyne

Teledyne 4020 Manual de instalación y operación

Teledyne

Teledyne TED 60-T Manual de usuario

Teledyne

Teledyne 3010TB Manual de usuario

Teledyne

Teledyne 7300A Manual de usuario

Teledyne

Teledyne 6020 Manual de usuario

Teledyne

Teledyne 9060 Manual de instrucciones

Teledyne

Teledyne GB300 Manual de usuario

Teledyne

Teledyne 3020P Manual de usuario

Teledyne

Teledyne 3000MA Manual de usuario

Teledyne

Teledyne 335 Series Manual de usuario

Teledyne

Teledyne 3300TA Manual de usuario

Teledyne

Teledyne BDS 3000 Manual de usuario

Teledyne

Teledyne 316RA Manual de usuario

Teledyne

Teledyne 3220 Manual de usuario

Teledyne

Teledyne 311 Manual de usuario

Teledyne

Teledyne 311-D Manual de usuario

Teledyne

Teledyne 3500 Series Manual de usuario

Teledyne

Teledyne EV71YC1MCL2010-BA0 Manual de usuario

Manuales populares de Instrumento analítico de otras marcas

Cocraft

Cocraft NLT04 Manual de usuario

M&C

M&C GENTWO PMA1000 Manual de usuario

MICRO-EPSILON

MICRO-EPSILON optoncdt 1700 Manual de usuario

CONDTROL

CONDTROL XP4 PRO Manual de usuario

Extech Instruments

Extech Instruments BR200 Manual de usuario

Dewetron

Dewetron DEWE-30-16 Manual del producto

EXTOL PREMIUM

EXTOL PREMIUM 8820043 Instrucciones de instalación y funcionamiento

RIDGID

RIDGID SeeSnake Compact Manual de usuario

YDLIDAR

YDLIDAR TIA Manual de usuario

Olympus

Olympus IPLEX FX Series Manual de usuario

Bosch

Bosch GLM 50 C Professional Manual de usuario

Reflecta

Reflecta DigiEndoscope Manual de usuario

Chinavision

Chinavision CVACZ-G696 Instrucciones de montaje

Fuji Electric

Fuji Electric ZKMA Manual de usuario

VOLTCRAFT

VOLTCRAFT IC-100HD Manual de usuario

RIDGID

RIDGID micro CA-25 Manual de usuario

Würth

Würth MASTERVISION MINI REC Manual de usuario

AMI

AMI 2001LC Manual de usuario