Teledyne Lecroy WaveSurfer 3000 Manual de usuario

Operator's Manual

WaveSurfer 3000/3000z

Oscilloscopes

WaveSurfer 3000/3000z Oscilloscopes Operator's Manual

Unauthorized duplication of Teledyne LeCroy, Inc. documentation materials other than for internal sales and

distribution purposes is strictly prohibited. However, clients are encouraged to duplicate and distribute Teledyne

LeCroy, Inc. documentation for their own internal educational purposes.

Teledyne LeCroy is a trademark of Teledyne LeCroy, Inc., Inc. Other product or brand names are trademarks or

requested trademarks of their respective holders. Information in this publication supersedes all earlier versions.

Specifications are subject to change without notice.

923648 Rev C

April, 2018

Contents

Safety 1

Symbols 1

Precautions 1

Operating Environment 2

Cooling 2

Cleaning 2

Power 3

Oscilloscope Overview 5

Front Input/Output Panel 5

Back Input/Output Panel 5

Front Panel 6

Signal Interfaces 8

Micro SD Card 10

Oscilloscope Set Up 11

Powering On/Off 11

Software Activation 11

Positioning the Feet 11

Connecting to Other Devices/Systems 12

Language Selection 13

Auto Setup 13

Recall Default Setup 13

Using MAUI 15

Touch Screen 15

Touch Actions 21

Working With Traces 22

Zooming 25

Print/Screen Capture 28

Acquisition 29

Vertical 29

Digital (Mixed Signal) 32

Timebase 37

Trigger 44

Viewing Status 53

Display 55

Display Set Up 55

Persistence Display 57

WaveSurfer 3000/3000z Oscilloscopes Operator's Manual

Math and Measure 59

Cursors 59

Measure 62

Math 70

Memory 83

Analysis Tools 85

WaveScan 85

Pass/Fail Testing 89

Save / Recall 91

Save Setups 91

Recall Setups 92

Save Waveforms 93

Recall Waveforms 95

Save Table Data 96

Auto Save 97

LabNotebook 98

Utilities 101

Utilities Dialogs 101

Disk Utilities 108

Preferences Dialogs 110

WaveSource Automatic Waveform Generator 115

Digital Voltmeter 117

Maintenance 119

Fuse Replacement 119

Touch Screen Calibration 119

Restart/Reboot Instrument 119

WaveSurfer 3000 Firmware Update 120

Technical Support 121

Returning a Product for Service 122

Certifications 123

EMC Compliance 123

Safety Compliance 124

Environmental Compliance 125

ISO Certification 125

Warranty 126

Intellectual Property 126

Index 127

Welcome

Thank you for purchasing a Teledyne LeCroy WaveSurfer oscilloscope. We're certain you'll be pleased with

the detailed features unique to our instruments.

Take a moment to verify that all items on the packing list or invoice copy have been shipped to you.

Contact your nearest Teledyne LeCroy customer service center or national distributor if anything is

missing or damaged. We can only be responsible for replacement if you contact us immediately.

We truly hope you enjoy using Teledyne LeCroy's fine products.

Sincerely,

David C. Graef

Vice President and General Manager, Oscilloscopes

Teledyne LeCroy

iii

WaveSurfer 3000/3000z Oscilloscopes Operator's Manual

Safety

To maintain the instrument in a correct and safe condition, observe generally accepted safety procedures

in addition to the precautions specified in this section. The overall safety of any system incorporating this

product is the responsibility of the assembler of the system.

Symbols

These symbols appear on the instrument or in documentation to alert you to important safety concerns:

Caution of potential damage to instrument or Warning of potential bodily injury. Do not proceed until

the information is fully understood and conditions are met.

Caution, high voltage; risk of electric shock or burn.

Frame or chassis terminal (ground connection).

Alternating current.

Standby power (front of instrument).

Precautions

Caution: Comply with the following to avoid personal injury or damage to your equipment.

Use indoors only within the operational environment listed. Do not use in wet or explosive atmospheres.

Maintain ground. This product is grounded through the power cord grounding conductor. To avoid electric

shock, connect only to a grounded mating outlet.

Connect and disconnect properly. Do not connect/disconnect probes, test leads, or cables while they are

connected to a live voltage source.

Observe all terminal ratings. Do not apply a voltage to any input that exceeds the maximum rating of that

input. Refer to the body of the instrument for maximum input ratings.

Use only power cord shipped with this instrument and certified for the country of use.

Keep product surfaces clean and dry. See Cleaning.

Do not remove the covers or inside parts. Refer all maintenance to qualified service personnel.

Exercise care when lifting. Use the built-in carrying handle.

Do not operate with suspected failures. Do not use the product if any part is damaged. Obviously incorrect

measurement behaviors (such as failure to calibrate) might indicate hazardous live electrical quantities.

Cease operation immediately and secure the instrument from inadvertent use.

WaveSurfer 3000/3000z Oscilloscopes Operator's Manual

Operating Environment

Temperature: 0 to 50° C.

Humidity: Maximum relative humidity 90 % for temperatures up to 31° C, decreasing linearly to 50%

relative humidity at 40° C.

Altitude: Up to 3,000 m at or below 30° C.

Cooling

The instrument relies on forced air cooling with internal fans and vents. Take care to avoid restricting the

airflow to any part. In a benchtop configuration, leave a minimum of 15 cm (6 inches) around the sides

between the instrument and the nearest object. The feet provide adequate bottom clearance. Follow

rackmount instructions for proper rack spacing.

Caution: Do not block the cooling vents.

The instrument also has internal fan control circuitry that regulates the fan speed based on the ambient

temperature. This is performed automatically after start-up.

Cleaning

Clean only the exterior of the instrument using a soft cloth moistened with water or an isopropyl alcohol

solution. Do not use harsh chemicals or abrasive elements. Under no circumstances submerge the

instrument or allow moisture to penetrate it. Dry the instrument thoroughly before connecting a live

voltage source.

Caution: Unplug the power cord before cleaning. Do not attempt to clean internal parts.

Safety

Power

The instrument operates from a single-phase, 100 to 240 Vrms (± 10%) AC power source at 50/60 Hz (±

5%), or a 100 to 120 Vrms (± 10%) AC power source at 400 Hz (± 5%). The instrument automatically

adapts to the line voltage. Manual voltage selection is not required.

Power Consumption

Power Consumption WaveSurfer 3000z WaveSurfer 3000

4-channel 4-channel 2-channel

Nominal 80 W (80 VA) 80 W (80 VA) 65 W (65 VA)

Maximum* 150 W (150 VA) 150 W (150 VA) 100 W (100 VA)

Standby 4 W 4 W 4 W

* Maximum consumption represents power accessories installed on all inputs/outputs (e.g., active probes, USB peripherals,

digital leadset, etc.).

Ground

The AC inlet ground is connected directly to the frame of the instrument. For adequate protection again

electric shock, connect to a mating outlet with a safety ground contact.

Caution: Only use the power cord provided with your instrument. Interrupting the protective

conductor inside or outside the oscilloscope, or disconnecting the safety ground terminal, creates

a hazardous situation. Intentional interruption is prohibited.

WaveSurfer 3000/3000z Oscilloscopes Operator's Manual

Otros manuales para WaveSurfer 3000

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de prueba de Teledyne Lecroy

Teledyne Lecroy

Teledyne Lecroy MS-500 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy PXP500 PCI Express Manual de usuario

Teledyne Lecroy

Teledyne Lecroy HDO8000 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy HDO9000 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy LabMaster 10 Zi-A Manual de usuario

Teledyne Lecroy

Teledyne Lecroy Everywhereyoulook HDO6000B Manual de usuario

Teledyne Lecroy

Teledyne Lecroy T3DSO3000 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 510 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy WaveJet Touch Manual de usuario

Teledyne Lecroy

Teledyne Lecroy WaveRunner/MDA 8000HD Series Manual de usuario

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 3000 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 510 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy AP033 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy frontline TLF 3000 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 3024Z Manual de usuario

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 3000 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy 780 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy PP066 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy frontline TLF 3000 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy Everywhereyoulook HDO6000B Manual de usuario

Teledyne Lecroy

Teledyne Lecroy T3AWG3K Series Manual de usuario

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 4034HD Manual de usuario

Teledyne Lecroy

Teledyne Lecroy HDO6000 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy HDO4024A-MS Manual de usuario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies

Agilent Technologies N3280A Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario