Teledyne Lecroy HDO4024A-MS Manual de usuario

HDO4000A

Oscilloscopes

Getting Started Guide

929955-00 Rev A

HDO4000A Oscilloscopes

Getting Started Guide

Unauthorized duplication of Teledyne LeCroy documentation materials is strictly prohibited. Customers are permitted to

duplicate and distribute Teledyne LeCroy documentation for internal educational purposes.

Teledyne LeCroy is a trademark of Teledyne LeCroy, Inc. Other product or brand names are trademarks or requested

trademarks of their respective holders. Information in this publication supersedes all earlier versions. Specifications are

subject to change without notice.

929955-00 Rev A,

January, 2019

700 Chestnut Ridge Road

Chestnut Ridge, NY 10977

1.800.5.LECROY •teledynelecroy.com

HDO4000A Getting Started Guide 1

Welcome

Thank you for buying a Teledyne LeCroy product. We’re certain you’ll be pleased with the detailed features unique to our instruments. This guide is

intended to help you set up a HDO4000A oscilloscope and learn some basic operating procedures, so you're quickly working with waveforms.

• See the MAUI Oscilloscopes Remote Control and Automation Manual for comprehensive information on remote control of HDO4000A.

• See the HDO4000A Oscilloscopes Operator’s Manual for detailed information on the operational features of the HDO4000A.

Both manuals can be downloaded from the Oscilloscope Manuals page on our website at: teledynelecroy.com/support/techlib

Introduction

Introducing HDO4000A Oscillosocopes 2

Safety 2

Overview

Front of Oscilloscope 4

Powering On/Off 5

Back and Side of Oscilloscope 6

Connecting to External Devices/Systems 7

Front Panel 9

Touch Screen Display 10

Basics

Changing the Display 12

Working with Traces 14

MAUI with OneTouch 15

Vertical (Channel) 20

Digital 22

Horizontal (Timebase) 24

Triggers 26

Zoom 28

Cursors 30

Measurements & Statistics 31

Math 32

Memories (Reference Waveforms) 33

Decode 34

WaveScan 35

Spectrum Analyzer 36

History Mode 37

Saving and Sharing Data 38

Maintenance

Software Options 39

Support 39

Cleaning 40

Language Selection 40

Calibration 40

Firmware Updates 41

Switching Windows Users 41

Service 42

Reference

Warranty 43

Windows License Agreement 43

Certifications 44

929955-00 Rev A

Key Specifications

Detailed specifications are on the product datasheet at teledynelecroy.com.

INTRODUCTION

Bandwidth 200 MHz to 1 GHz

Analog Channels 4 standard

Memory per Channel

(4 channel operation) up to 12.5 Mpts/ch

Sample Rate up to 10 GS/s*

Vertical Resolution 12-bit

Digital Channels (optional) 16

Digital Sample Rate 1.25 GS/s

Min. Detectable Pulse Width 2 ns

Max. Input Frequency 250 MHz

* With Enhanced Sample Rate

Introducing HDO4000A

Combining Teledyne LeCroy’s HD4096 high-definition technology with

long memory, a compact form factor, 12.1” touch screen display, powerful

measurement and analysis tools, and mixed signal capability, the

HDO4000A scillosocopes are ideal for circuit validation, system debug and

waveform analysis. The powerful feature set provides analytical tools and

unique application packages to streamline the testing process.

HD4096

HD4096 high-definition technology consists of 12-bit ADCs, high signal-

to-noise input amplifiers and a low-noise system architecture. HDO™

instruments capture and display signals up to 1 GHz with a high sample

rate and 16 times more resolution than other oscilloscopes. Waveforms

are cleaner and crisper. Signal details often lost in the noise are clearly

visible and easy to distinguish, and measurements can be performed with

unmatched precision for improved debug and analysis.

Enhanced Sample Rate

Enhanced sample rate technology automatically ensures optimal display

of acquired waveforms to the instrument’s full rated bandwidth.

MAUI with OneTouch

MAUI with OneTouch introduces a new paradigm for oscilloscope user

experience. Dramatically reduce set up time with revolutionary drag-

and-drop actions to copy and change channels, math functions and

measurement parameters without lifting a finger. Use familiar touch

screen gestures like pinch, swipe and flick to intuitively interact with the

instrument. Quickly enable new traces or parameters using the “Add New”

button, and turn them off with a simple flick of the finger.

Safety

Observe generally accepted safety practices in addition to the precautions

specified here.

CAUTION of potential damage

to equipment, or WARNING of

potential bodily injury. Refer to

manual. Do not proceed until the

information is fully understood

and conditions are met.

WARNING. Risk of electric shock

or burn.

Frame or chassis terminal

Alternating current

Power On/Standby

Symbols

HDO4000A Getting Started Guide 3

Precautions

Use proper power cord. Use only the power cord shipped with this

instrument and certified for the country of use.

Maintain ground.

The AC inlet ground is connected to the frame of the

instrument. Connect line cords only to outlets with safety ground contacts.

WARNING. Interrupting the protective conductor inside or outside

the oscilloscope, or disconnecting the safety ground terminal,

creates a hazardous situation. Intentional interruption is prohibited.

Connect and disconnect properly. Do not connect/disconnect probes or

test leads while they are connected to a live voltage source.

Observe all terminal ratings. Do not apply a voltage to any input that

exceeds the maximum rating of that input. Refer to the markings next to

the BNC terminals for maximum allowed values.

Use only within operational environment listed. Do not use in wet or

explosive environments.

Use indoors only.

Keep product surfaces clean and dry.

Do not block the cooling vents. Leave a minimum six-inch (15 cm) gap

between the instrument and the nearest object. Keep the underside clear

of papers and other objects.

Exercise care when lifting and carrying. Unplug and use the built-in

carrying handle to move the instrument.

Do not remove the covers or inside parts. Refer all maintenance to

qualified service personnel.

Do not operate with suspected failures. Check body and cables regularly.

If any part is damaged, cease operation immediately and sequester the

instrument from inadvertent use.

SAFETY

Operating Environment

Temperature 5 °C to 40 °C

Humidity Maximum RH 90% (non-condensing) up to 31 °C

decreasing linearly to RH 50% at 40 °C

Altitude Up to 10,000 ft (3,048 m) at or below 30 °C

AC Power 100-240 VAC (±10%) at 50/60 Hz (±10%) or

100-120 VAC (±10%) at 400 Hz (±5%)

Automatic AC Voltage Selection

Consumption

Nominal 200 W / 200 VA

Maximum* 300 W / 300 VA

Standby 4 W

Power

* All PC peripherals and active probes connected to four channels.

Measuring Terminal Ratings

Ratings apply to inputs C1-C4 and Ext In.

Measuring terminals have no rated measurement category (CAT) per IEC/EN 61010-1:2010.

Measuring terminals are not intended to be connected directly to supply mains.

Maximum Input Voltage 50 Ω coupling ≤ 5 Vrms

1 MΩ coupling ≤ 400 Vpk max. (Peak AC ≤ 10 kHz + DC)

derating at 15 dB/decade from 10 kHz to 1.6 MHz,

10 Vpk max. above 1.6 MHz

929955-00 Rev A

A. Touch Screen Display

B. Front Panel

C. Built-in Stylus Holder

D. Power On/Standby Button

E. Input Channels 1-4

F. EXT Input

G. Mixed Signal Interface

H. Ground and Cal Out Terminals

I. USB Ports

J. Rotating/Tilting Feet

Front of Oscilloscope

OVERVIEW

HDO4000A Getting Started Guide 5

OVERVIEW

The touch screen display is the principal viewing and control center of

the oscilloscope. See p.10 for an overview of its components.

The front panel houses hard controls for different acquisition settings.

Operate the instrument using front panel controls, touch screen controls

or a mix that is convenient for you. See "Front Panel" on p.9.

The built-in stylus holder stores a stylus for use with the touch screen.

Channels 1–4 are used to input analog signal. EXT can be used to input

an external trigger signal.

The Mixed Signal interface connects

the digital leadset to input up-to-16 lines

of digital data (on -MS models). See p.8.

The Ground terminal can be used with a

ground lead or wrist strap. The Cal Out

terminal emits a signal that can be used

to compensate passive probes.

Front mounted USB 2.0 ports can

be used for transferring data to

a removable drive or connecting

peripherals such as a mouse or

keyboard.

The rotating, tilting feet enable four

different viewing positions.

Powering On/Off

Plug the line cord only into a grounded AC power outlet. See Power in

“Safety” for ratings. Press the Power button to turn on the oscilloscope. The

button will light to show the oscilloscope is operational.

CAUTION. Do not power on or calibrate with a signal attached.

Press the Power button again or use or the File > Shutdown menu option

to execute a proper shut down process and preserve settings.

CAUTION. Do not press and hold the Power button. This will

execute a hard shutdown, but may not preserve setups and data.

The Power button does not disconnect the oscilloscope from the AC

power supply, but puts it into "Standby" mode. Some “housekeeping”

circuitry continues to draw power. The only way to fully power down the

instrument is unplug the AC line cord from the outlet. We recommend

unplugging the instrument if it will remain unused for a long period of time

CAUTION. Do not change the Windows® Power setting to System

Standby or System Hibernate. Doing so may cause failure.

929955-00 Rev A

HDMI and DisplayPort Ports

USB 3.1 Gen 1 Ports (4)

Side and Back of Oscilloscope

Ethernet Ports (2)

Audio Mic and Speaker

REF In/Out

USBTMC Port for remote control

AC Power Inlet

Built-in Carrying Handle

AUX Out

OVERVIEW

HDO4000A Getting Started Guide 7

Connecting to External Devices/Systems

See the HDO4000A Oscilloscopes Operator’s Manual for more instructions

on connecting to external devices.

Audio/USB Peripherals

Connect the device to the appropriate port. These connections are “plug-

and-play” and do not require further configuration. Use the Windows

control panel to make adjustments. Choose File > Minimize to go to the

Windows desktop.

External Monitor

The HDMI and DisplayPort interfaces support Ultra HD monitors. Connect

the monitor to a video output on the side of the instrument. You can

use an adapter if it does not have an HDMI or DP cable. Go to Display >

Display Setup > Open Monitor Control Panel to configure display settings

using the Windows control panel. Be sure to select the oscilloscope as

the primary display.

To use the Extend Grids feature, configure the second monitor to extend,

not duplicate, the oscilloscope display. If the external monitor is touch

screen enabled, the MAUI user interface can be controlled through touch

on the external monitor.

Note: The oscilloscope touch screen uses Fujitsu drivers. Because of

potential conflicts, external monitors with Fujitsu drivers cannot be used

as touch screens, only as displays.

LAN

The HDO4000A is preset to accept a DHCP network address over a TCP/IP

connection. Connect an ENET cable from either port to a network access

device. Go to Utilities > Utilities Setup > Remote to find the IP address.

To assign the oscilloscope a static IP address, open Net Connections

from the Remote dialog and use the Windows networking dialogs to

configure the device address. Go to File > File Sharing to configure email.

Remote Control

You can control the instrument over a LAN using VICP (TCP/IP) or

VXI-11 (LXI). Use a standard ENET cable to connect to a network access

point, and be sure the instrument is on the same subnet as the controller.

You can also connect directly using TCP/IP, but depending on the

controller, you may need to use a cross-over cable.

Note: To use LXI on Windows 10 oscilloscopes, switch to the

Administrative User LCRYADMIN (p.41).

USBTMC and GPIB (with the optional USB-GPIB adapter) can also be used

to make a remote connection.To change the remote control setting from

the default VICP (TCP/IP), go to Utilities > Utilities Setup > Remote.

Printer

HDO4000A supports USB printers that are compatible with the Windows

OS installed on the oscilloscope. Connect the printer to any host USB

port, then go to File > Print Setup > Print and select Printer to configure

settings. Choose Properties to open the Windows print dialog.

Aux Out and Cal Out

The oscilloscope can output a pulse upon a trigger event or Pass/Fail

outcome. Connect a BNC cable from Aux Out on the back of the instrument

to the other device. Go to Utilities > Utilities Setup > Aux Output to

configure the output.

The Cal Out hook on the front can be set to output a direct current or

square wave of custom amplitude and frequency. Use the Aux Output

dialog to configure Cal Out.

Reference Clock

To input or output a reference clock signal, connect a BNC cable from

Ref In/Out on the back of the instrument to the other instrument. Go to

Timebase > Horizontal Setup > Reference Clock to configure the clock.

OVERVIEW

929955-00 Rev A

OVERVIEW

Probes

HDO4000A oscilloscopes are compatible with the included passive probes

and most Teledyne LeCroy ProBus active probes that are rated for the

oscilloscope’s bandwidth. Probe specifications and documentation are

available at teledynelecroy.com/probes.

Digital Leadset

Delivered with the purchase of a Mixed Signal (-MS) model, the digital

leadset enables input of up-to-16 lines of digital data. Lines can be

organized into two logical groups representing different buses and

renamed appropriately.

The digital leadset features two digital banks with separate threshold

controls, making it possible to simultaneously view data from different

logic families.

Each flying lead has a signal and a ground connection. A variety of ground

extenders and flying ground leads are available for different probing

needs. To achieve optimal signal integrity, connect the ground at the tip

of the flying lead for each channel used in measurements. Use either the

provided ground extenders or flying ground leads to make the ground

connection.

To connect the leadset to the oscilloscope, push the connector into the

mixed signal interface below the front panel until you hear a click.

To remove the leadset, press in and hold the buttons on each side of the

connector, then pull out to release it.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de prueba de Teledyne Lecroy

Teledyne Lecroy

Teledyne Lecroy WavePro HD series Manual de usuario

Teledyne Lecroy

Teledyne Lecroy HDO6000 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy PXP500 PCI Express Manual de usuario

Teledyne Lecroy

Teledyne Lecroy PP066 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy WaveJet Touch Manual de usuario

Teledyne Lecroy

Teledyne Lecroy HDO4104A Manual de usuario

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 10 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy HDO4000 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy ZS1000 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy HDO4032 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy WaveMaster 8 Zi-B Manual de usuario

Teledyne Lecroy

Teledyne Lecroy frontline TLF 3000 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 4034HD Manual de usuario

Teledyne Lecroy

Teledyne Lecroy HDO4000 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 4000HD Manual de usuario

Teledyne Lecroy

Teledyne Lecroy 780C Manual de usuario

Teledyne Lecroy

Teledyne Lecroy T3DSO3000 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy WaveRunner/MDA 8000HD Series Manual de usuario

Teledyne Lecroy

Teledyne Lecroy HDO4000A Manual de usuario

Teledyne Lecroy

Teledyne Lecroy AP034 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy FrontLine Harmony Manual de usuario

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 10 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy RP2060 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy WaveRunner 9000 Manual de usuario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies

Agilent Technologies N3280A Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario