Teledyne Lecroy LabMaster 10 Zi-A Manual de usuario

LabMaster 10 Zi-A

Oscilloscope Systems

Getting Started Guide

933204-00 Rev A

700 Chestnut Ridge Road

Chestnut Ridge, NY 10977

1.800.5.LECROY •teledynelecroy.com

LabMaster 10 Zi-A Oscilloscope Systems

Getting Started Guide

Unauthorized duplication of Teledyne LeCroy documentation materials is strictly prohibited. Customers are permitted to

duplicate and distribute Teledyne LeCroy documentation for internal educational purposes.

Teledyne LeCroy is a trademark of Teledyne LeCroy, Inc. Other product or brand names are trademarks or requested

trademarks of their respective holders. Information in this publication supersedes all earlier versions. Specifications are

subject to change without notice.

933204-00 Rev A

labmaster-10-zi-a-gsg-eng_23feb21.pdf

February, 2021

LabMaster 10 Zi-A Getting Started Guide 1

Welcome

Thank you for buying a Teledyne LeCroy product. We’re certain you’ll be pleased with the detailed features unique to our instruments. This guide is

intended to help you set up a LabMaster 10 Zi-A system and learn some basic operating procedures, so you're quickly working with waveforms.

• See the MAUI Oscilloscopes Remote Control and Automation Manual for comprehensive information on remote control of LabMaster 10 Zi-A.

• See the LabMaster Oscilloscope Systems Operator’s Manual for detailed information on the operational features of the LabMaster 10 Zi-A.

Both manuals can be downloaded from the Oscilloscope Manuals page on our website at: teledynelecroy.com/support/techlib

Introduction

Introducing LabMaster 10 Zi-A 2

Safety 3

Overview

Front of MCM Zi-A Master Control Module 4

Back of MCM Zi-A Master Control Module 5

Front of LM10xxZi-A Acquisition Module 6

Back of LM10xxZi-A Acquisition Module 7

Front Panel 8

Set Up

Connecting LabMaster Components 9

ChannelSync Configuration 10

Powering On/Off 11

Probes and Adapters 11

Connecting to External Devices/Systems 12

Basics

Saving and Sharing Data 13

Using the Touch Screen Display 14

Changing the Display 16

Working with Traces 18

MAUI with OneTouch 19

Vertical (Channel) 24

Digital 26

Horizontal (Timebase) 28

Triggers 30

Zoom 32

Cursors 34

Measurements & Statistics 35

Math 36

Memories (Reference Waveforms) 37

Decode 38

WaveScan 39

Maintenance

Cleaning 40

Adding Option Keys 40

Calibration 40

Firmware Updates 41

Switching Windows Users 41

Service 42

Support 43

Reference

Warranty 43

Certifications 44

933204-00 Rev A

Bandwidth 20 GHz to 100 GHz

Analog Channels 4 to 80

Digital Channels (optional) 18 with HDA125

Vertical Resolution 8-bits standard

up to 11-bits with ERES

4 Channels 2 Channels

(All DBI Models)

1 Channel

(100 GHz DBI Model)

Memory per Channel 512 Mpts/ch 1024 Mpts/ch 1536 Mpts/ch

Analog Sample Rate 80 GS/s 160 GS/s 240 GS/s

Digital Sample Rate 12.5 GS/s

Key Specifications

Detailed specifications are on the product datasheet at teledynelecroy.

com.

INTRODUCTION

Introducing LabMaster 10 Zi-A

LabMaster 10 Zi-A real-time oscilloscope systems boast the world’s high-

est bandwidth and fastest sampling rate, up to 100 GHz and 240 GS/s.

ChannelSync technology ensures precise timing synchronization by

design—channel-to-channel jitter of only 130 fs exceeds the performance

of “single-box” systems. This world-leading performance is key to acquiring,

analyzing and understanding the fastest phenomena found in R&D labs,

where engineers are working on next-generation communication systems,

high-bandwidth electrical components and scientific research.

MAUI®with OneTouch

MAUI with OneTouch introduces a new paradigm for oscilloscope user

experience. Dramatically reduce set up time with revolutionary drag-and-

drop actions, or use familiar touch screen gestures like pinch, swipe and

flick to intuitively interact with the instrument.

Mixed Signal Option

The HDA125 High Speed Digital Analyzer enables up-to-18 integrated digi-

tal channels and a set of tools designed to simultaneously view, measure

and analyze analog and digital signals for fast debugging of mixed signal

designs. The industry’s only true 14.1 Gb/s serial pattern hardware trigger

with flexible analog and digital triggering across all channels provides the

ability to quickly identify and isolate problems in an embedded system.

Sophisticated Software for Sophisticated Analysis

LabMaster 10 Zi-A systems excel at performing in-depth analysis of

complicated signals. For NRZ signals, the SDAIII-CompleteLinQ package

compares eye, jitter and noise on up to four lanes, simultaneously. PAM4

Signal Analysis enables the industry’s only true eye, jitter and noise

measurements on PAM4 signals.

The Optical-LinQ package simplifies

analysis of coherent optical signals such as DP-QPSK and DP-16QAM.

CAUTION of potential damage

to equipment, or WARNING of

potential injury. Refer to the

manual. Do not proceed until the

information is fully understood

and conditions are met.

WARNING. Risk of electric shock

or burn.

Ground terminal

Alternating current

Power On/Standby

Symbols

Safety

Observe generally accepted safety practices in addition to the precautions

specified here.

LabMaster 10 Zi-A Getting Started Guide 3

Operating Environment Precautions

Use proper power cord. Use only the power cords shipped with each

module and certified for the country of use.

Maintain ground.

The AC inlet ground is connected to the chassis of each

module. Connect line cords only to outlets with safety ground contacts.

WARNING. Interrupting the protective conductor inside or outside a

module, or disconnecting the safety ground terminal, creates a

hazardous situation. Intentional interruption is prohibited.

Connect and disconnect properly. Do not connect/disconnect probes or

test leads while they are connected to a live voltage source.

Observe all terminal ratings. Do not apply a voltage to any input that

exceeds the maximum rating of that input. Refer to the markings next to

the terminals for maximum allowed values.

Use only within operating environment listed here. Do not use in wet or

explosive environments.

Use indoors only.

Keep product surfaces clean and dry.

Do not block the cooling vents. Leave a minimum six-inch (15 cm) gap

between each module and the nearest object. Keep the underside clear

of papers and other objects.

Exercise care when lifting and carrying.

Do not remove the covers or inside parts. Refer all maintenance to

qualified service personnel.

Do not operate with suspected failures. Check body and cables

regularly. If any part is damaged, cease operation immediately and

sequester the instrument from inadvertent use.

INTRODUCTION

Temperature 5 °C to 40 °C

Humidity Maximum RH 80% (non-condensing) up to 31 °C

decreasing linearly to RH 50% at 40 °C

Altitude Up to 10,000 ft (3,048 m) at or below 25 °C

Power

* All PC peripherals and active probes connected to four channels.

WARNING. Secure acquisition module power cords with the cable

clamps at all times. Failure to do so creates a fire hazard.

AC Power 100-240 VAC (±10%) at 50/60 Hz (±10%) or

100-120 VAC (±10%) at 400 Hz (±5%)

Automatic AC Voltage Selection

Consumption MCM Zi-A 20 - 36 GHz

LMxxZi-A

50 - 65 GHz

LMxxZi-A

LM100Zi-A

Maximum* 450 W (450 VA) 1225 W (1225 VA) 1275 W (1275 VA) 1275 W (1275 VA)

Standby 5 W 12 W 12 W 12 W

Measuring Terminal Ratings

Ratings apply to inputs C1-Cnand Aux In.

Measuring terminals have no rated measurement category (CAT) per IEC/EN 61010-1:2010.

Measuring terminals are not intended to be connected directly to supply mains.

Maximum Input Voltage 50 Ω coupling ≤ 5 Vrms

933204-00 Rev A

Front of MCM Zi-A Master Control Module

OVERVIEW

The Touch Screen display is the

principal viewing and control center.

Front Panel release button detaches

the front panel for use like a remote.

The removable Front Panel can be

used to control the oscilloscope in

addition to the touch screen.

The Power button makes all

components operational, or puts them

in “standby” mode. It only works when

all cabling is correct.

Fast Edge output emits a square wave

signal with ~30 ps rising edges that

can be used to compensate passive

probes or deskew inputs.

Ground terminal can be used to

ground active probes.

Connect peripherals and storage

devices to the host USB 2.0 ports.

E GF

LabMaster 10 Zi-A Getting Started Guide 5

OVERVIEW

Back of MCM Zi-A Master Control Module

SMA 10 GHz Clock and PCIe 1-Lane

SYNC outputs

10 or 100 MHz REF IN and REF OUT

Clocks to input/output an external

Reference Clock signal

Removable storage drive

D. AC

Power inlet and buzzer reset

switch. Press the button to reset/

power-on the system (and silence the

buzzer) in case of over temperature

shut-down.

USB 3.1 ports (4) for high-speed

peripherals and Ethernet ports (2)

for LAN connection/remote control

(9-pin and 15-pin disabled)

PCIe 4-Lane DATALINK inputs

(2 standard, more with additional

acquisition modules)

DVI-D video out (to external monitor)

Expansion card slots for optional

hardware

ABC

E F G H

933204-00 Rev A

Front of LM10xxZi-A Acquisition Modules

ABC

2.92 mm interfaces (4)

for input of ≤ 36 GHz signals

Aux In to input external trigger

or sample clock (50 Ω only)

Aux Out to output pulse on

trigger or Pass/Fail result

LED channel indicators show

selection of standard (A) or high

bandwidth (B) channel

Channel ON/FF buttons

Ground connection for

wrist strap

Two 1.85 mm interfaces are added to the

front of 50 GHz through 65 GHz acquisition

modules for input of signals > 36 GHz.

100 GHz acquisition modules have a single 1 mm

interface instead of the two 1.85 mm interfaces

for input of signals > 36 GHz.

OVERVIEW

LabMaster 10 Zi-A Getting Started Guide 7

Back of LM10xxZi-A Acquisition Modules

SMA 10 GHz Clock input

PCIe 1-Lane SYNC input

PCIe 4-Lane DATALINK output

AC power inlet with cable clamp

OVERVIEW

933204-00 Rev A

Help opens WaveMaster Support, which contains extensive

documentation of the standard oscilloscope functions as well as all

options that run on the WaveMaster platform.

Default Setup returns all channels to the factory default settings.

Auto Setup turns on and configures all channels with a signal attached.

The edge trigger level is set to the signal mean.

The Print button captures the screen and handles it according to your

Print setting (file, LabNotebook, etc.).

The Touch Screen button enables or disables touch screen functionality.

Clear Sweeps resets math and measurement counters.

Zoom creates zooms of all open channel traces.

All the knobs on the front panel function one way if

turned and another if pushed like a button. The first

label describes the knob’s principal “turn” action, while

the second describes its “push” action.

Many front panel buttons light to indicate the function

is active.

Front Panel

Most of the front panel controls duplicate functionality available through the

touch screen display. They are covered in more detail in the Basics section

and in the LabMaster Oscilloscope Systems Operator’s Manual. Below are some

special front panel controls.

AB C

OVERVIEW

Tabla de contenidos

Otros manuales de Equipo de prueba de Teledyne Lecroy

Teledyne Lecroy

Teledyne Lecroy WaveRunner/MDA 8000HD Series Manual de usuario

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 3000z Manual de usuario

Teledyne Lecroy

Teledyne Lecroy T3DSO3000 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 10 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy HDO9000 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy HDO6000 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy HDO4104A Manual de usuario

Teledyne Lecroy

Teledyne Lecroy HDO4022 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy WaveRunner/MDA 8000HD Series Manual de usuario

Teledyne Lecroy

Teledyne Lecroy 780C Manual de usuario

Teledyne Lecroy

Teledyne Lecroy HDO4024A-MS Manual de usuario

Teledyne Lecroy

Teledyne Lecroy 780 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy Everywhereyoulook HDO6000B Manual de usuario

Teledyne Lecroy

Teledyne Lecroy PP066 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy WavePro HD series Manual de usuario

Teledyne Lecroy

Teledyne Lecroy CP030A Manual de usuario

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 4034HD Manual de usuario

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 3000 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy AP034 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy PXP500 PCI Express Manual de usuario

Teledyne Lecroy

Teledyne Lecroy T3AWG3K Series Manual de usuario

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 3104Z Manual de usuario

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 3000 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 3024Z Manual de usuario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies

Agilent Technologies N3280A Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario