Teldat Regesta-PRO ER B Manual de usuario

Regesta-PRO ER B Router

Installation Manual

Teldat S.A. Manual

Regesta-PRO ER B Router 1

Legal Notice

Warranty

This publication is subject to change.

Teldat S.A. offers no warranty whatsoever for information contained in this manual.

Teldat S.A. is not liable for any direct, indirect, collateral, consequential or any other damage connected to the deliv-

ery, supply or use of this manual.

Manual Teldat S.A.

2 Regesta-PRO ER B Router

Table of Contents

I RelatedDocuments................................. 1

Chapter1 AboutThisGuide.................................. 2

1.1 SupportedDevices................................... 2

1.2 Who should read this manual? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1.3 When should I read this manual? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1.4 Whatisinthismanual?................................. 2

1.5 Whatisnotinthismanual? ............................... 2

1.6 How is the information organized? . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1.7 TechnicalSupport ................................... 2

Chapter2 Regesta-PROERB ................................ 3

2.1 Characteristics..................................... 3

2.1.1 PowerSupply..................................... 3

2.1.2 Monitoringhardware .................................. 3

Chapter 3 Components and Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3.1 Components...................................... 4

3.1.1 FrontPanel...................................... 4

3.1.2 RearPanel ...................................... 6

3.1.3 UndersidePanel.................................... 6

3.1.4 UpperPanel...................................... 7

3.2 Assembly....................................... 7

3.2.1 Installing a DIN rail mount accessory . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3.2.2 InstallingtheProtector.................................. 8

3.3 PowerSource..................................... 9

3.3.1 Connecting the Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3.4 RSTButton..................................... 11

3.4.1 Restartingthedevice................................. 11

3.4.2 DefaultConfiguration................................. 11

3.5 DataConnections................................... 12

3.5.1 EthernetSwitch ................................... 12

3.5.2 Connecting the WWAN Antenna (RF connectors) . . . . . . . . . . . . . . . . . . . . . 12

3.5.3 Connecting to the serial ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Chapter 4 Installing the SIM card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Teldat S.A. Table of Contents

Regesta-PRO ER B Router i

4.1 IdentifyingtheSIMtrays................................ 15

4.2 Procedure to install the SIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Appendix A Technical Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

A.1 Troubleshooting................................... 17

A.2 Updatingthesoftware................................. 17

A.3 Connectingtotherouter................................ 18

A.3.1 Connecting through the local console (CONF connector). . . . . . . . . . . . . . . . . . 18

A.3.2 Connection through an IP terminal (LAN 1...6 connectors) . . . . . . . . . . . . . . . . . 18

A.4 Connectors ..................................... 19

A.4.1 LANConnector.................................... 19

A.4.2 DSLConnector.................................... 19

A.4.3 RFConnectors.................................... 20

A.4.4 ConfigurationConnector................................ 20

A.4.5 RS-232 Serial Port Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

A.4.6 RS-485 Serial Port Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

A.5 TechnicalSpecifications................................ 21

A.5.1 LANInterface .................................... 21

A.5.2 DSLInterface .................................... 21

A.5.3 WirelessWANInterface................................ 21

A.5.4 ConfigurationInterface ................................ 22

A.5.5 RS-232SerialInterface................................ 22

A.5.6 RS-485SerialInterface................................ 22

A.5.7 PowerSupply.................................... 22

A.5.8 DimensionsandWeight................................ 22

A.5.9 Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

AppendixB Safetyinformation ................................ 23

B.1 Recycling and the Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

B.2 Translated Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Table of Contents Teldat S.A.

ii Regesta-PRO ER B Router

I Related Documents

Teldat Dm748-I Software Updating

Teldat Dm781-I Cellular Interface.

Teldat S.A. Related Documents

Regesta-PRO ER B Router 1

Chapter 1 About This Guide

This Regesta-PRO ER B router family installation manual contains information on how to correctly install the router in

an appropriate operating environment.

1.1 Supported Devices

Information provided in this installation guide only applies to the Regesta-PRO ER B router family.

1.2 Who should read this manual?

This manual should be read by installers who need to install, configure, maintain and monitor the router.

1.3 When should I read this manual?

Read this guide as soon as you are ready to familiarize yourself with the device and its components.

This manual will help you understand your new device in greater depth.

1.4 What is in this manual?

This installation guide contains the following information:

• A description of the general characteristics available in the Regesta-PRO ER B router family.

• Technical Specifications.

• Power supply requirements.

• Description of the router LEDs and connectors.

• Troubleshooting.

1.5 What is not in this manual?

This manual does not contain information on the device software or on its configuration. For information on how to

configure the device, please see the different protocol manuals at http://www.teldat.com.

1.6 How is the information organized?

Each chapter focuses on a specific part of the router hardware and its components. All descriptive and technical spe-

cifications, or information on a component, can be found in the relevant chapter.

1.7 Technical Support

Teldat S.A. offers a technical support service. Device software can be upgraded for maintenance and new features.

Contact information:

Web: http://www.teldat.com

Tel.: +34 918 076 565

Fax: +34 918 076 566

Email: suppor[email protected]

1 About This Guide Teldat S.A.

2 Regesta-PRO ER B Router

Chapter 2 Regesta-PRO ER B

2.1 Characteristics

The Regesta-PRO ER B family is a range of IP routers particularly suited to hostile and extreme environments.

Thanks to their ruggedized mechanics and special characteristics, which allow them to tolerate extreme temperat-

ures, these routers are especially suitable for: industrial environments, industrial telecontrol, distribution installations

for electricity, gas, water, etc.

Thanks to its modular design, this device can quickly adapt to the latest WWAN technologies. The Regesta-PRO ER

B is compatible with wireless technologies such as GPRS, EDGE, UMTS, HSDPA, HSUPA, HSPA+, LTE, CDMA

2000 1xRTT, CDMA Ev-Do. The basic license makes connections through GPRS/EDGE technology possible. Addi-

tional licenses provide support for technologies with a wider bandwidth. Depending on the model, the device may in-

clude 0, 1 or 2 WWAN modules. In addition, said device can accommodate 2 SIM cards. These can be active when

two modules are incorporated, or one can play an active role while the other is used as backup in configurations with

a single module.

As for LAN networks, this device incorporates a 6 port 10/100BaseT LAN Ethernet Switch. The basic license enables

the first 2 ports. By upgrading said basic license, you can enable all 6 ports.

The RS-232 console port can be configured as a DCE asynchronous serial communications port, with a maximum

speed of 38400 bps without control signals. The device can incorporate two additional asynchronous serial ports with

a maximum speed of 115200, with DCE RS-232 technology or with RS-485 2-4 wires/RS-422. Serial port connectors

are DB9.

The device incorporates a transparent protector, which prevents connectors from being touched while the device is

running.

Fig. 1: Regesta-PRO ER B with transparent protector

2.1.1 Power Supply

For further information on Regesta-PRO ER B power sources, please see Power Source on page 9.

2.1.2 Monitoring hardware

The Regesta-PRO ER B hardware is monitored through LEDs on the front panel. Said LEDs provide visual informa-

tion on what is happening in the router. These indicate the status of the hardware components, if there is connection

or not, data flow, etc.

For further information on the LEDs panel, please see section Front Panel on page 4.

Teldat S.A. 2 Regesta-PRO ER B

Regesta-PRO ER B Router 3

Chapter 3 Components and Power Supply

The following chapter provides information on the Regesta-PRO ER B chassis and its components. This information

includes:

• Components.

• Assembly instructions.

• Power supply.

• RST button.

• Data connection.

• Inserting the SIM card.

3.1 Components

3.1.1 Front Panel

The following figure shows the front panel.

Fig. 2: Front panel

Front panel elements are as follows:

Elements table for the front panel

Item Description

A RF2. WWAN antenna connector.

B RST. Reset button. For further information on how the reset button functions,

please see section RST Button on page 11 further on in this chapter.

C 6-port Fast Ethernet Switch.

D DSL. Not available.

E CONF. DB9 connector, providing access to the device local console for configura-

tion and monitoring purposes. (This connector can also be used as an RS-232

asynchronous DCE serial port).

F I/O. ON/OFF power switch, position I for ON and position O to switch it OFF.

G RF1. WWAN antenna connector.

H POWER. Power connection. For more information on the power connection,

please see section Connecting the Power Supply on page 9.

In addition to connectors, the front panel also contains a set of LEDs, which provide information on the state of the

3 Components and Power Supply Teldat S.A.

4 Regesta-PRO ER B Router

router.

The LEDs are organized on the router front panel (see the following figure):

Fig. 3: Front panel LEDs

While the device is in startup mode, LED Llights up in green. Once start up is complete, the LEDs indicate the fol-

lowing:

Front panel LEDs table

LED Associated interface Status Description

SCellular interface corresponding to

the active SIM.

Green

Amber

SK1 operating SIM. This processes

traffic through the carrier for the SIM

installed in this tray.

SK2 operating SIM. This processes

traffic through the carrier for the SIM

installed in this tray.

CCellular interface corresponding to

the active SIM.

Red

Amber

Green

Cellular interface is not available, not

installed or not registered.

The device has registered in the net-

work and is establishing the PPP pro-

tocol.

The device is registered, PPP is es-

tablished and it can send IP traffic

through the PPP interface.

- Steady: data is not being trans-

ferred.

- Blinking: data is being transferred.

LCellular interface corresponding to

the active SIM.

Green

Yellow

Red

Off

Coverage level above -90dBm.

Coverage level between -90dBm and

-100dBm.

Coverage level below -100dBm.

Cellular interface is not active.

100 Associated to each Ethernet switch

connector (LAN1…LAN6).

Amber ON -> Connection at 100Mbps.

OFF -> Connection at 10Mbps.

LNK Associated to each Ethernet switch Green ON -> Ethernet connection (link) es-

Teldat S.A. 3 Components and Power Supply

Regesta-PRO ER B Router 5

connector (LAN1…LAN6). tablished:

- Steady: data is not being trans-

ferred.

- Blinking: data is being transferred.

3.1.2 Rear Panel

The following figure shows the rear panel:

Fig. 4: Rear panel

Rear panel elements are as follows:

Rear panel elements table

Item Description

A COM1, COM2. DCE RS-232 serial ports or RS-485 2-4 wires/RS-422.

3.1.3 Underside Panel

The following figure shows the underside panel:

Fig. 5: Underside panel

Underside panel elements are as follows:

Underside panel elements table

3 Components and Power Supply Teldat S.A.

6 Regesta-PRO ER B Router

Tabla de contenidos

Otros manuales de Enrutador de red de Teldat

Teldat

Teldat M1 Manual de usuario

Teldat

Teldat Atlas-i70 Manual de usuario

Teldat

Teldat M2 Manual de usuario

Teldat

Teldat Atlas 250 Manual de usuario

Teldat

Teldat RS300 Series Manual de usuario

Teldat

Teldat C1+L Manual de usuario

Teldat

Teldat C Manual de usuario

Teldat

Teldat H2 RAIL Manual de usuario

Teldat

Teldat bintec elmeg Regesta PRO PLC Manual de usuario

Teldat

Teldat G1N Manual de usuario

Teldat

Teldat RXL14000 Manual de usuario

Teldat

Teldat iM8 Manual de usuario

Teldat

Teldat 3ge Manual de usuario

Teldat

Teldat C1+LS Manual de usuario

Teldat

Teldat REGESTA-PRO-ER Series Manual de usuario

Teldat

Teldat Teldat-3Ge-USB Manual de usuario

Teldat

Teldat H1 RAIL Series Manual de usuario

Teldat

Teldat Regesta Lite AU Manual de usuario

Teldat

Teldat K Seres Manual de usuario

Teldat

Teldat Regesta Smart PLC Manual de usuario

Teldat

Teldat H2 RAIL Lite Manual de usuario

Teldat

Teldat Regesta Smart PRO Manual de usuario

Teldat

Teldat RS1800 Series Manual de usuario

Teldat

Teldat iM8 Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad