Tektronix TMSSC2 Manual de usuario

Instruction Manual

TMSSC2

604-Pin Socket Hardware Support

071-1345-00

www.tektronix.com

Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supercedes

that in all previously published material. Specifications and price change privileges reserved.

Tektronix, Inc., P.O. Box 500, Beaverton, OR 97077

TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.

HARDWARE WARRANTY

Tektronix warrants that the products that it manufactures and sells will be free from defects in materials and

workmanship for a period of one (1) year from the date of shipment. If a product proves defective during this

warranty period, Tektronix, at its option, either will repair the defective product without charge for parts and labor,

or will provide a replacement in exchange for the defective product.

In order to obtain service under this warranty, Customer must notify Tektronix of the defect before the expiration

of the warranty period and make suitable arrangements for the performance of service. Customer shall be

responsible for packaging and shipping the defective product to the service center designated by Tektronix, with

shipping charges prepaid. Tektronix shall pay for the return of the product to Customer if the shipment is to a

location within the country in which the Tektronix service center is located. Customer shall be responsible for

paying all shipping charges, duties, taxes, and any other charges for products returned to any other locations.

This warranty shall not apply to any defect, failure or damage caused by improper use or improper or inadequate

maintenance and care. Tektronix shall not be obligated to furnish service under this warranty a) to repair damage

resulting from attempts by personnel other than Tektronix representatives to install, repair or service the product;

b) to repair damage resulting from improper use or connection to incompatible equipment; c) to repair any

damage or malfunction caused by the use of non-Tektronix supplies; or d) to service a product that has been

modified or integrated with other products when the effect of such modification or integration increases the time

or difficulty of servicing the product.

THIS WARRANTY IS GIVEN BY TEKTRONIX IN LIEU OF ANY OTHER WARRANTIES, EXPRESS

OR IMPLIED. TEKTRONIX AND ITS VENDORS DISCLAIM ANY IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TEKTRONIX’

RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE PRODUCTS IS THE SOLE AND

EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR BREACH OF THIS WARRANTY.

TEKTRONIX AND ITS VENDORS WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES IRRESPECTIVE OF WHETHER TEKTRONIX OR

THE VENDOR HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.

SOFTWARE WARRANTY

Tektronix warrants that the media on which this software product is furnished and the encoding of the programs on

the media will be free from defects in materials and workmanship for a period of three (3) months from the date of

shipment. If a medium or encoding proves defective during the warranty period, Tektronix will provide a

replacement in exchange for the defective medium. Except as to the media on which this software product is

furnished, this software product is provided “as is” without warranty of any kind, either express or implied.

Tektronix does not warrant that the functions contained in this software product will meet Customer’s

requirements or that the operation of the programs will be uninterrupted or error-free.

In order to obtain service under this warranty, Customer must notify Tektronix of the defect before the expiration

of the warranty period. If Tektronix is unable to provide a replacement that is free from defects in materials and

workmanship within a reasonable time thereafter, Customer may terminate the license for this software product

and return this software product and any associated materials for credit or refund.

THIS WARRANTY IS GIVEN BY TEKTRONIX IN LIEU OF ANY OTHER WARRANTIES, EXPRESS

OR IMPLIED. TEKTRONIX AND ITS VENDORS DISCLAIM ANY IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TEKTRONIX’

RESPONSIBILITY TO REPLACE DEFECTIVE MEDIA OR REFUND CUSTOMER’SPAYMENTIS

THE SOLE AND EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR BREACH OF THIS

WARRANTY. TEKTRONIX AND ITS VENDORS WILL NOT BE LIABLE FOR ANY INDIRECT,

SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES IRRESPECTIVE OF WHETHER

TEKTRONIX OR THE VENDOR HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH

DAMAGES.

TMSSC2 604-Pin Socket Support

Table of Contents

General Safety Summary v...................................

Service Safety Summary vii....................................

Preface ix...................................................

Manual Conventions ix..............................................

Contacting Tektronix x..............................................

Getting Started

Product Description 1--1..............................................

Logic Analyzer Configuration 1--1......................................

P6860 Probes 1--2................................................

LAI Cables 1--2..................................................

Labeling P6860 Probes 1--3........................................

Labeling LAI Cables 1--3..........................................

Standard and Optional Accessories 1--3...................................

Probe Adapter Review 1--3............................................

Configure the Preprocessor Unit 1--4.....................................

Connecting the Logic Analyzer to a Target System 1--5......................

Tools 1--5......................................................

Connect the Logic Analyzer 1--5....................................

Removing the Microprocessor 1--10...................................

Removing the Probe Head from the Target System 1--10...................

Applying LAI Labels 1--11.............................................

Connect the Probes and LAI Cables 1--12..................................

LAI Cable and P6860 Probe Connections (Four Modules) 1--14.............

Fifth Module 1--14................................................

Applying and Removing Power 1--14.....................................

Logic Analyzer Software Compatibility 1--15...............................

Installing the Software 1--15............................................

Care and Maintenance 1--16.............................................

External Cleaning Only 1--16........................................

Short-Term Storage 1--17...........................................

Long-Term Storage 1--18...........................................

Shipping the Probe Adapter 1--19........................................

Specifications

Circuit Description 2--1...............................................

Loading Diagrams 2--3................................................

Specification Tables 2--5..............................................

Reference

Reference Tables 3--1..........................................

Viewing Reference Tables 3--1..........................................

To View a Symbol Table 3--1.......................................

To Extract Channel Assignments and Groups 3--1.......................

Table of Contents

TMSSC2 604-Pin Socket Support

Replaceable Parts List

Parts Ordering Information 4--1.........................................

Using the Replaceable Parts List 4--2.....................................

Index

Table of Contents

TMSSC2 604-Pin Socket Support

iii

List of Figures

Figure 1--1: Master and Slave module configuration 1--2.............

Figure 1--2: Selecting your software on the preprocessor unit 1--4.....

Figure 1--3: Removing microprocessor probe head from the

target system 1--6..........................................

Figure 1--4: Attach the probe head to the target system 1--7..........

Figure 1--5: Attaching the heat sink brackets and microprocessor to the

target system 1--8..........................................

Figure 1--6: Attaching the heat sink to the target system 1--9..........

Figure 1--7: Remove the microprocessor with the extraction tool 1--10..

Figure 1--8: Apply LAI labels 1--11................................

Figure 1--9: LAI cable, P6860 probe, and preprocessor unit 1--12.......

Figure 1--10: LAI cable, P6860 probe, and module configurations 1--13..

Figure 1--11: Nonspecific probe head and case 1--17..................

Figure 1--12: Place preprocessor unit in the cardboard carton 1--18.....

Figure 1--13: Place cables in the cutouts 1--18.......................

Figure 1--14: Place accessories in the accessory tray 1--19.............

Figure 2--1: Probe adapter preliminary load model for typical signals 2--3

Figure 2--2: Pin header electrical load model for typical signals 2--4...

Figure 2--3: Socket electrical load model for typical signals 2--4.......

Figure 2--4: Mated Samtec model 2--4.............................

Figure 2--5: Receiver Model 2--4.................................

Figure 2--6: Dimensions of the probe head 2--8.....................

Figure 2--7: Dimensions of the preprocessor unit 2--9................

Figure 3--1: Channel Setup Export window 3--2....................

Figure 4--1: Probe adapter exploded view 4--5......................

Figure 4--2: Preprocessor unit exploded view 4--6...................

List of Tables

Table 1--1: Software selection 1--4................................

Table 1--2: P6860 probe and LAI cable configurations 1--13...........

Table 2--1: Electrical specifications for the target system 2--5........

Table 2--2: Electrical specifications for the AC input to the

preprocessor unit 2--6......................................

Table 2--3: BCLK timing and electrical specifications at 25 °C2--6...

Table 2--4: Environmental specifications 2--6......................

Table 2--5: Certifications and compliances 2--7.....................

Table of Contents

TMSSC2 604-Pin Socket Support

General Safety Summary

Review the following safety precautions to avoid injury and prevent damage to

this product or any products connected to it. To avoid potential hazards, use this

product only as specified.

Only qualified personnel should perform service procedures.

While using this product, you may need to access other parts of the system. Read

the General Safety Summary in other system manuals for warnings and cautions

related to operating the system.

Use Proper Power Cord. Use only the power cord specified for this product and

certified for the country of use.

Connect and Disconnect Properly. Do not connect or disconnect probes or test

leads while they are connected to a voltage source.

Ground the Product. This product is grounded through the grounding conductor

of the power cord. To avoid electric shock, the grounding conductor must be

connected to earth ground. Before making connections to the input or output

terminals of the product, ensure that the product is properly grounded.

Observe All Terminal Ratings. To avoid fire or shock hazard, observe all ratings

and markings on the product. Consult the product manual for further ratings

information before making connections to the product.

Connect the ground lead of the probe to earth ground only.

Do Not Operate Without Covers. Do not operate this product with covers or panels

removed.

Use Proper Fuse. Use only the fuse type and rating specified for this product.

Avoid Exposed Circuitry. Do not touch exposed connections and components

when power is present.

Do Not Operate With Suspected Failures. If you suspect there is damage to this

product, have it inspected by qualified service personnel.

Do Not Operate in Wet/Damp Conditions.

Do Not Operate in an Explosive Atmosphere.

Keep Product Surfaces Clean and Dry.

Provide Proper Ventilation. Refer to the manual’s installation instructions for

details on installing the product so it has proper ventilation.

ToAvoidFireor

Personal Injury

General Safety Summary

TMSSC2 604-Pin Socket Support

Terms in this Manual. These terms may appear in this manual:

WARNING. Warning statements identify conditions or practices that could result

in injury or loss of life.

CAUTION. Caution statements identify conditions or practices that could result in

damage to this product or other property.

Terms on the Product. These terms may appear on the product:

DANGER indicates an injury hazard immediately accessible as you read the

marking.

WARNING indicates an injury hazard not immediately accessible as you read the

marking.

CAUTION indicates a hazard to property including the product.

Symbols on the Product. The following symbols may appear on the product:

CAUTION

Refer to Manual

WARNING

High Voltage

Protective Ground

(Earth) Terminal

Symbols and Terms

Tabla de contenidos

Otros manuales de Instrumento de medición de Tektronix

Tektronix

Tektronix RSA3408A Manual de usuario

Tektronix

Tektronix P5102 Manual de usuario

Tektronix

Tektronix WVR6100 Series Manual de usuario

Tektronix

Tektronix RSA5106B Instrucciones de instalación y mantenimiento

Tektronix

Tektronix 7L13 Manual de usuario

Tektronix

Tektronix TriMode P7700 Series Manual de usuario

Tektronix

Tektronix KEITHLEY 2600B Series Manual de usuario

Tektronix

Tektronix OM2012 Manual

Tektronix

Tektronix MTM400 Manual de usuario

Tektronix

Tektronix DSA8300 Manual de operación y mantenimiento

Tektronix

Tektronix MTS4EA Manual de usuario

Tektronix

Tektronix 7L5 Manual de usuario

Tektronix

Tektronix 308 Manual de usuario

Tektronix

Tektronix RSA6100A Series Manual de usuario

Tektronix

Tektronix TDP1000TDP1500 Manual

Tektronix

Tektronix WVR5200 Series Manual de uso y cuidado

Tektronix

Tektronix 495 Manual de usuario

Tektronix

Tektronix TLA7000 Series Manual de usuario

Tektronix

Tektronix RSA5BUP Manual de usuario

Tektronix

Tektronix H500 Manual de usuario

Tektronix

Tektronix ECO8000 Series Manual de usuario

Tektronix

Tektronix DC5010 Manual de usuario

Tektronix

Tektronix 576 Manual de usuario

Tektronix

Tektronix TDS5032 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario