Tektronix P6022 Manual de usuario
®
E
s
t
a
b
l
i
s
h
e
d
1
9
8
1
Advanced Test
Equipment Rentals
Advanced Test Equipment Rentals
www.atecorp.com 800-404-ATEC (2832)
Advanced Test Equipment Rentals
www.atecorp.com 800-404-ATEC (2832)
®
E
s
t
a
b
l
i
s
h
e
d
1
9
8
1
Instruction Manual
P6022
Current Probe
070-0948-04
Warning
The servicing instructions are for use by qualified
personnel only. To avoid personal injury, do not
perform any servicing unless you are qualified to
do so. Refer to all safety summaries prior to
performing service.
www.tektronix.com
Copyright ©Tektronix, Inc. All rights reserved.
Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supercedes
that in all previously published material. Specifications and price change privileges reserved.
Tektronix, Inc., P.O. Box 500, Beaverton, OR 97077
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
WARRANTY
Tektronix warrants that the products that it manufactures and sells will be free from defects in materials and
workmanship for a period of one (1) year from the date of purchase from an authorized Tektronix distributor. If
any such product proves defective during this warranty period, Tektronix, at its option, either will repair the
defective product without charge for parts and labor, or will provide a replacement in exchange for the defective
product. Batteries are excluded from this warranty.
In order to obtain service under this warranty, Customer must notify Tektronix of the defect before the expiration
of the warranty period and make suitable arrangements for the performance of service. Customer shall be
responsible for packaging and shipping the defective product to the service center designated by Tektronix,
shipping charges prepaid, and with a copy of customer proof of purchase. Tektronix shall pay for the return of the
product to Customer if the shipment is to a location within the country in which the Tektronix service center is
located. Customer shall be responsible for paying all shipping charges, duties, taxes, and any other charges for
products returned to any other locations.
This warranty shall not apply to any defect, failure or damage caused by improper use or improper or inadequate
maintenance and care. Tektronix shall not be obligated to furnish service under this warranty a) to repair damage
resulting from attempts by personnel other than Tektronix representatives to install, repair or service the product;
b) to repair damage resulting from improper use or connection to incompatible equipment; c) to repair any
damage or malfunction caused by the use of non-Tektronix supplies; or d) to service a product that has been
modified or integrated with other products when the effect of such modification or integration increases the time
or difficulty of servicing the product.
THIS WARRANTY IS GIVEN BY TEKTRONIX WITH RESPECT TO THE LISTED PRODUCTS IN
LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED. TEKTRONIX AND ITS VENDORS
DISCLAIM ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. TEKTRONIX’ RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE
PRODUCTS IS THE SOLE AND EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR
BREACH OF THIS WARRANTY. TEKTRONIX AND ITS VENDORS WILL NOT BE LIABLE FOR ANY
INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES IRRESPECTIVE OF
WHETHER TEKTRONIX OR THE VENDOR HAS ADVANCE NOTICE OF THE POSSIBILITY OF
SUCH DAMAGES.
P6022 Instruction Manual i
Contents
General Safety Summary iii....................................
Service Safety Summary v....................................
Operator Information
Description 1.............................................
Installation 1.............................................
Attaching the Probe and Termination to an Oscilloscope 2...
Using the Standard Accessories 2........................
Operating Considerations 3................................
Features and Controls 3.................................
Insertion Impedance 4..................................
Minimizing Loading Effect 4.............................
Increasing Probe Sensitivity 4............................
Probe Shielding 5......................................
Droop 5...............................................
Service Information
Warranted Characteristics 7...............................
Typical Characteristics 10..................................
Circuit Description 12......................................
Current Probe 12........................................
Termination 12..........................................
Probe Performance 13......................................
Performance Verification 15.................................
Check Midband Accuracy 15.............................
Check Low Frequency Response 16.......................
Check High Frequency Bandwidth 18......................
P6022 Test Record 20......................................
Adjustment Procedure 21...................................
Preparation 21..........................................
Adjust Aberrations 21....................................
Maintenance 23............................................
Cleaning 23............................................
Disassembling the Probe 23..............................
Repairing the Probe 25...................................
Repairing the Termination 25..............................
Contentsii
Replaceable Electrical Parts
Parts Ordering Information 27...............................
Using the Replaceable Parts List 27.........................
Replaceable Mechanical Parts
Parts Ordering Information 33...............................
Using the Replaceable Parts List 33.........................
Index
P6022 Instruction Manual iii
General Safety Summary
Review the following safety precautions to avoid injury and prevent damage
to this product or any products connected to it.
Only qualified personnel should perform service procedures.
Injury Precautions
Avoid Electric Overload
To avoid injury or fire hazard, do not apply potential to any input, including
the common inputs, that varies from ground by more than the maximum
rating for that input.
Do Not Operate Without Covers
To avoid electric shock or fire hazard, do not operate this product with
covers or panels removed.
Do Not Operate in Wet/Damp Conditions
To avoid electric shock, do not operate this product in wet or damp condi-
tions.
Do Not Operate in an Explosive Atmosphere
To avoid injury or fire hazard, do not operate this product in an explosive
atmosphere.
Product Damage Precautions
Do Not Operate with Suspected Failures
If you suspect there is damage to this product, have it inspected by qualified
service personnel.
Do Not Immerse in Liquids
Clean the probe using only a damp cloth. Refer to cleaning instructions.
Safetyiv
Safety Terms and Symbols
Terms in This Manual
These terms may appear in this manual:
WARNING
Warning statements identify conditions or practices that could result
in injury or loss of life.
CAUTION
Caution statements identify conditions or practices that could result
in damage to this product or other property.
Terms on the Product
These terms may appear on the product:
DANGER indicates an injury hazard immediately accessible as you read the
marking.
WARNING indicates an injury hazard not immediately accessible as you
read the marking.
CAUTION indicates a hazard to property including the product.
Symbols on the Product
The following symbols may appear on the product:
Protective
Ground (Earth)
Te r m i n a l
ATTENTION
Refer to Manual
Double
Insulated
DANGER
High Volt-
age
P6022 Current Probe
P6022 Instruction Manual v
Service Safety Summary
Only qualified personnel should perform service procedures. Read this
Service Safety Summary and the General Safety Summary before performing
any service procedures.
Do Not Service Alone
Do not perform internal service or adjustments of this product unless anoth-
er person capable of rendering first aid and resuscitation is present.
Otros manuales para P6022
2
Tabla de contenidos
Otros manuales de Instrumento de medición de Tektronix
Tektronix
Tektronix Keithley 6517-RH Manual de usuario
Tektronix
Tektronix 492P Manual de operación y mantenimiento
Tektronix
Tektronix WFM2300 Manual
Tektronix
Tektronix VM700T Manual de usuario
Tektronix
Tektronix VM700T Manual de usuario
Tektronix
Tektronix DPO7OE Series Manual de usuario
Tektronix
Tektronix TLA5204 Manual de usuario
Tektronix
Tektronix TriMode P7700 Series Manual de uso y cuidado
Tektronix
Tektronix TLA6402 Instrucciones de instalación y mantenimiento
Tektronix
Tektronix KEITHLEY 4200A Manual de usuario
Tektronix
Tektronix WVR5000 Instrucciones de montaje
Tektronix
Tektronix WVR7200 Instrucciones de instalación y mantenimiento
Tektronix
Tektronix WFM5200 series Manual de uso y cuidado
Tektronix
Tektronix BPA100 Manual de usuario
Tektronix
Tektronix P6248 Manual de usuario
Tektronix
Tektronix TLA5202 Manual de usuario
Tektronix
Tektronix 1401 Manual de usuario
Tektronix
Tektronix FCA3100 Series Guía del administrador
Tektronix
Tektronix KEITHLEY 2600B Series Manual de usuario
Tektronix
Tektronix 1L10 Manual de usuario
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario