Tektronix TekSmartLab TBX3000A Manual

The test & measurement

equipment you need at

the price you want.

Alltest carries the world’s largest selection of

used/refurbished benchtop test & measurement

equipment at 50% the price of new.

Our equipment is guaranteed working, warrantied, and

available with certified calibration from our in-house staff

of technicians and engineers.

• 10+ full time technicians with over 150 years of

specialization

• 90 day warranty & 5 day right of return on all

equipment

•

• 1-3 year warranties for new and

premium-refurbished equipment

• Every unit tested to OEM specifications

• Satisfaction guaranteed

You have plans, we will help you achieve them.

Any project. Any budget.

Get a quote today!

CCall (732) 919-3339 or email sales@alltest.net.

Alltest Instruments, Inc.

500 Central Ave.

Farmingdale, NJ 07727

P: (732) 919-3339

F: (732) 919-3332

alltest.net

sales@alltest.net

TekSmartLab™ TBX3000A

Installation and Safety

ZZZ

Instructions

*P071338700*

071-3387-00

TekSmartLab™ TBX3000A

Installation and Safety

ZZZ

Instructions

Click the following link to protect your

product.

►www.tektronix.com/register

www.tektronix.com

071-3387-00

owned by Tektronix or its subsidiaries or suppliers, and are protected by national

Tektronix products are covered by U.S. and foreign patents, issued and pending.

Information in this publication supersedes that in all previously published

material. Speciﬁcations and price change privileges reserved.

TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.

TekSmartLab is a trademark of Tektronix, Inc.

Contacting Tektronix

Tektronix, Inc.

14150 SW Karl Braun Drive

P.O. Box 500

Beaverton, OR 97077

USA

For product information, sales, service, and technical support:

In North America, call 1-800-833-9200.

Worldwide, visit www.tektronix.com to ﬁnd contacts in your area.

Warranty

Tektronix warrants that the product will be free from defects in materials and workmanship

for a period of three (3) years from the date of original purchase from an authorized

Tektronix distributor. If the product proves defective during this warranty period,

Tektronix, at its option, either will repair the defective product without charge for parts

and labor, or will provide a replacement in exchange for the defective product. Batteries

are excluded from this warranty. Parts, modules and replacement products used by

Tektronix for warranty work may be new or reconditioned to like new performance. All

replaced parts, modules and products become the property of Tektronix.

In order to obtain service under this warranty, Customer must notify Tektronix of the

defect before the expiration of the warranty period and make suitable arrangements for the

performance of service. Customer shall be responsible for packaging and shipping the

defective product to the service center designated by Tektronix, shipping charges prepaid,

and with a copy of customer proof of purchase. Tektronix shall pay for the return of the

product to Customer if the shipment is to a location within the country in which the

Tektronix service center is located. Customer shall be responsible for paying all shipping

charges, duties, taxes, and any other charges for products returned to any other locations.

This warranty shall not apply to any defect, failure or damage caused by improper use or

improper or inadequate maintenance and care. Tektronix shall not be obligated to furnish

service under this warranty a) to repair damage resulting from attempts by personnel other

than Tektronix representatives to install, repair or service the product; b) to repair damage

resulting from improper use or connection to incompatible equipment; c) to repair any

damage or malfunction caused by the use of non-Tektronix supplies; or d) to service a

product that has been modiﬁed or integrated with other products when the effect of such

modiﬁcation or integration increases the time or difﬁculty of servicing the product.

THIS WARRANTY IS GIVEN BY TEKTRONIX WITH RESPECT TO THE

PRODUCT IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED.

TEKTRONIX AND ITS VENDORS DISCLAIM ANY IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TEKTRONIX'

RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE PRODUCTS IS THE

SOLE AND EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR

BREACH OF THIS WARRANTY. TEKTRONIX AND ITS VENDORS WILL NOT BE

LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

DAMAGES IRRESPECTIVE OF WHETHER TEKTRONIX OR THE VENDOR HAS

ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.

[W16 – 15AUG04]

Table of Contents

Important safety information ........................................... ii

General safety summary ........................................... ii

Service safety summary............................................ iv

Terms in this manual................................................ v

Symbols and terms on the product................................. v

Compliance information ................................................ vi

EMC compliance................................................... vi

Safety compliance................................................. vii

Environmental considerations..................................... ix

Get acquainted with the TBX3000A.................................... 1

Operating requirements............................................. 1

Main features ........................................................ 1

Inputs, outputs, and indicators ..................................... 2

Conﬁgure the TBX3000A ............................................... 7

LAN conﬁguration .................................................. 8

WIFI conﬁguration.................................................. 9

Set password....................................................... 10

TekSmartLab™ Instructions i

Important safety information

This manual contains information and warnings that must be followed

by the user for safe operation and to keep the product in a safe condition.

To safely perform service on this product, additional information

is provided at the end of this section. (See page iv, Service safety

summary.)

General safety summary

Use the product only as speciﬁed. Review the following safety

precautions to avoid injury and prevent damage to this product or any

products connected to it. Carefully read all instructions. Retain these

instructions for future reference.

Comply with local and national safety codes.

For correct and safe operation of the product, it is essential that you

follow generally accepted safety procedures in addition to the safety

precautions speciﬁed in this manual.

The product is designed to be used by trained personnel only.

Only qualiﬁed personnel who are aware of the hazards involved should

remove the cover for repair, maintenance, or adjustment.

This product is not intended for detection of hazardous voltages.

While using this product, you may need to access other parts of a larger

system. Read the safety sections of the other component manuals for

warnings and cautions related to operating the system.

When incorporating this equipment into a system, the safety of that

system is the responsibility of the assembler of the system.

To avoid ﬁre or personal injury

Use proper power cord. Use only the power cord speciﬁed for this

product and certiﬁed for the country of use.

Do not use the provided power cord for other products.

ii TekSmartLab™ Instructions

Important safety information

Ground the product. This product is grounded through the grounding

conductor of the power cord. To avoid electric shock, the grounding

conductor must be connected to earth ground. Before making

connections to the input or output terminals of the product, make sure

that the product is properly grounded.

Power disconnect. The power cord disconnects the product from the

power source. See instructions for the location. Do not position the

equipmentsothatitisdifﬁcult to operate the power cord; it must remain

accessible to the user at all times to allow for quick disconnection if

needed.

Use proper AC adapter. Use only the AC adapter speciﬁed for this

product.

Observe all terminal ratings. To avoid ﬁre or shock hazard, observe all

ratings and markings on the product. Consult the product manual for

further ratings information before making connections to the product.

The measuring terminals on this product are not rated for connection to

mains or Category II, III, or IV circuits.

Do not operate without covers. Do not operate this product with covers

or panels removed, or with the case open. Hazardous voltage exposure

is possible.

Avoid exposed circuitry. Do not touch exposed connections and

components when power is present.

Do not operate with suspected failures. If you suspect that there is damage

to this product, have it inspected by qualiﬁed service personnel.

Disable the product if it is damaged. Do not use the product if it is

damaged or operates incorrectly. If in doubt about safety of the product,

turn it off and disconnect the power cord. Clearly mark the product to

prevent its further operation.

Examine the exterior of the product before you use it. Look for cracks

or missing pieces.

Use only speciﬁed replacement parts.

TekSmartLab™ Instructions iii

Tabla de contenidos

Otros manuales de Instrumento de medición de Tektronix

Tektronix

Tektronix P6139A Manual de usuario

Tektronix

Tektronix H500 Manual de usuario

Tektronix

Tektronix RSA3303A Manual de usuario

Tektronix

Tektronix TLA 7F1 Manual de usuario

Tektronix

Tektronix MTS4EA Manual de usuario

Tektronix

Tektronix FCA3003 Manual de usuario

Tektronix

Tektronix 1S2 Manual de usuario

Tektronix

Tektronix P6231 Manual de usuario

Tektronix

Tektronix RSA5100B series Guía de referencia

Tektronix

Tektronix DTM500 Series Manual de uso y cuidado

Tektronix

Tektronix VM700A VMTB Manual de usuario

Tektronix

Tektronix TDS5032 Manual de usuario

Tektronix

Tektronix 7L12 Manual de usuario

Tektronix

Tektronix VM700T Manual de operación y mantenimiento

Tektronix

Tektronix IsoVu TIVP Series Manual de usuario

Tektronix

Tektronix P6248 Manual de usuario

Tektronix

Tektronix SDA601 Manual de usuario

Tektronix

Tektronix 7D20 Manual de usuario

Tektronix

Tektronix RSA3408A Manual de usuario

Tektronix

Tektronix VM700T Manual de usuario

Tektronix

Tektronix 7L5 Manual de usuario

Tektronix

Tektronix P6563A Manual de usuario

Tektronix

Tektronix P6022 Manual de usuario

Tektronix

Tektronix P5102 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario