Tecnosicurezza TechMaster Manual de usuario

TechMaster

User Instructions

2 of 28 IU_ TechMaster_05_eng

User instructions

TechMaster

Company

Founded in 1983 with the aim of providing a complete range of professional products,

Tecnosicurezza is now a consolidated reality in the field of locks and security systems for safes.

The experience gained in over 35 years of activity in the security sector has allowed the

designing and manufacturing of high technology and reliability systems, which continue to

receive the approval of an increasingly demanding clientele.

TECNOSICUREZZA is present throughout Europe, Asia, North and South America markets and,

through an extensive distribution network.

TECNOSICUREZZA is aimed at national and international customers of primary importance, such

as banks, safe manufacturers, cash in transit companies, mass market retailers and post offices.

Today TECNOSICUREZZA is a leading company focused on the customers’ needs and is

constantly in step with technology.

 
 
 
 
 IU_TechMaster_05_eng 3 of 28 
User instructions 
 
TechMaster 
 
Table of contents 
COMPANY 2 
TABLE OF CONTENTS 3 
IMPORTANT NOTES! 5 
GENERAL INFORMATION 6 
OVERVIEW FUNCTIONS 9 
OPENING THE LOCKS 10 
USERS (OR OVERRIDE USERS): OPENING WITHOUT TIME DELAY 10 
USERS:OPENING WITH TIME DELAY 10 
MANAGER (OR OVERRIDE MANAGER): OPENING WITHOUT TIME DELAY 10 
MANAGER (OR OVERRIDE MANAGER): OPENING WITH TIME DELAY 10 
OPENING WITH DYNAMIC CODES (DALLAS KEY OPTION)11 
OPENING WITH DYNAMIC CODES (PIN OPTION)11 
DUAL MODE OPENING WITHOUT TIME DELAY 12 
DUAL MODE OPENING WITH TIME DELAY 12 
MASTER MENU 12 
TIME &DATE SETTINGS 12 
TIME AND DATE RECOVERY THROUGH DYAMAWEB (OTC SOFTWARE)13 
TIME LOCK SETTINGS 13 
WEEKLY TIME LOCK SETTINGS –ADDING NEW VALUES 14 
WEEKLY TIME LOCK SETTINGS –VERIFY OR DELETE VALUES 14 
CLOSING PERIODS (OFF DAYS)–ADD NEW VALUES 15 
OPENING PERIODS -ADD NEW VALUES 16 
OPENING PERIODS -VERIFY OR DELETE VALUES 16 
PC CONNECTION 17 
MANAGER MANAGEMENT 17 
DYNAMIC CODES –ENABLING/DISABLING 17 
DYNAMIC CODES ACTIVATION WITH STATIC CODES DELETING 18 
MANAGER MENU 18 
USERS MANAGEMENT 18 
TIME DELAY 19 
VARIABLE TIME DELAY –ADDING NEW VALUES 19 
VARIABLE TIME DELAY –VERIFY OR DELETE VALUES 20 
PC CONNECTION 20 
OVERRIDE MANAGER MENU 20 
OVERRIDE USERS MANAGEMENT 20 
CODE CHANGING 21 
CHANGE CODE FOR STANDARD AND OVERRIDE USERS 21 
CHANGE CODE FOR MANAGER 21 

4 of 28 IU_ TechMaster_05_eng

User instructions

TechMaster

CHANGE CODE FOR OVERRIDE MANAGER 22

CHANGE CODE FOR MASTER 22

TIME MENU 22

OPENING EXTENSION 22

IMMEDIATE TIME LOCK 23

CONFIGURATION MENU 23

INSTALL LOCKS 23

REMOVE LOCKS 24

LOCK RECLOSURE MODE 24

CONFIGURE I/O INTERFACE 25

REMOVE I/O INTERFACE 25

DISPLAY CONTRAST 25

KEYPAD LANGUAGE 26

MEMBRANE TEST 26

SYSTEM INFO 26

DYNAMIC KEYPAD ID AND DYAMAWEB SOFTWARE LICENSE 27

CORRECT DISPOSAL OF THIS PRODUCT: 28

(WASTE ELECTRICAL & ELECTRONIC EQUIPMENT) 28

CONTACTS 28

IU_TechMaster_05_eng 5 of 28

User instructions

TechMaster

Important notes!

Before installing this product, please read carefully the installation and operating

instructions.

Locks have been designed to correctly operate in a temperature range from -5°C to +

50°C and in an environment with non-condensing humidity between 25% and 90%.

The lock must not be oiled/lubricated/greased.

If installed in normal domestic or office environments, the locks do not require

maintenance; in any case, after 10,000 opening/locking cycles, it is recommended to run

a test that verifies the correct and complete operation of the product.

Use only DURACELL™ 9 Volt Alkaline batteries, or battery holders with DURACELL™ 1.5

Volt Alkaline batteries. Alternatively, it is possible to use a 12VDC - 1A power adapter

(p.n. N1212) with relative power supply interface (p.n. T6005/W or p.n. T6005).

A long beep together with the message “LOW BATTERY” on the display, indicate a low

battery level which need immediate replacing.

It is strongly recommended to change the default codes before the usage and to keep

safely the new codes.

Do never use codes easy to be guessed such as 123456, birth dates or others, based on

own personal information.

After changing a code, perform several opening/closing tests before closing the door.

Should the lock label be removed, warranty is void.

6 of 28 IU_ TechMaster_05_eng

User instructions

TechMaster

General information

Using your keypad

Press any button to power up the keypad. LCD which shows:

ENTER CODE

X X –X X X X X X

If more locks are installed, LCD displays:

Enter the lock number to select it.

SELECT LOCK

To enter a code, power up the LCD and enter the corresponding

digits.

LCD automatically switches OFF if no buttons are pressed

within 30s.

To scroll the menu, press .

To confirm an operation or enter a menu press .

To leave a menu and come back to the main menu, scroll the

functions until “EXIT?” and press OK.

To enter a code plus Dallas key (if set), enter the code digits and

insert the Dallas key in the keypad reader.

To enter a user provided with Dallas key only (if set), insert the

Dallas key in the keypad reader. LCD displays:

DALLAS USER

To start a time delay counting (if set), enter a code. LCD

displays:

TIME DELAY

00:59

To stop a time delay counting, press and then confirm with

STOP DELAY

COUNTING?

After time delay counting, LCD displays open window counting:

Press and enter a code for opening.

OPEN WINDOW

00:01

If a wrong code is entered, LCD displays the message:

WRONG CODE

If a wrong dynamic/activation code is entered, LCD displays the

message:

WRONG DYNAMIC

CODE

IU_TechMaster_05_eng 7 of 28

User instructions

TechMaster

If a dynamic/activation code is entered more than 30 minutes

before its beginning validity time, LCD displays:

WRONG DYNAMIC

CODE

If a dynamic/activation code is entered more than 30 minutes

later than its beginning validity time, LCD displays:

WRONG DYNAMIC

CODE

To open or access the menu in dual mode (if set), enter the first

code. LCD displays:

Then, enter the second code.

ENTER 2° CODE

X X –X X X X X X

Shortcuts

Press and hold for 2 seconds the button related to the needed function:

= Change Manager code (01), users, override users, Master and Manager ovr (if configured)

= PIN entering for dynamic codes (after dynamic codes activation)

= Test mode

= access to Manager menu, Manager ovr menu (if configured) Change code menu, Time

menu, Configuration menu and Master menu.

= System info and time and date info

= Exit and back to the main menu

= Master menu

User properties and default codes

Users can be set for opening with code only, code + Dallas key or with Dallas key only. It is also

possible to set a dual mode opening: in this case, entering the two users codes is required to

open the lock.

Default codes are:

Master: 1-2-3-4-5-6-7-8.

Manager: 123456.

8 of 28 IU_ TechMaster_05_eng

User instructions

TechMaster

Users from 02 to 90: 02-020202, 03-030303, and so on. They always open with time delay if

set.

Override users: thanks to the setup software, it is possible to configure users in between 10 and

90 (10-101010, 11-111111, and so on) as override users. They always open without time delay.

The table below reports the main users functions.

Master

Manager

Access to Master Menu

Set time and date

Set Time Lock periods

Audit download

Manager Management

Enable/disable OTCs

Change code

PC Link

Access to Manager Menu

Standard users management

Override users management

Set time delay

Set variable time delay

PC Link

Audit download

Opening

Code changing

Set opening extension

Set immediate time lock

Override manager

Configuration menu

Access to Ovr. Manager menu

Override users management

Code changing

Install/remove locks

Set display contrast

Change language

Test mode

Check system Information

Override users

Standard users

Opening

Change code

Opening

Set opening extension, if enabled

Set immediate time lock, if enabled

Code changing

This user manual describes the standard programming. According such programming and unless

different requests while ordering the product, an opening can be performed by entering single

users codes (no dual mode) and without time delay. Thus, the user manual must be adapted

according the configuration selected.

It is strongly recommended to change the default codes before using the lock.

IU_TechMaster_05_eng 9 of 28

User instructions

TechMaster

Overview functions

Lock opening

After entering an opening code, it is possible to open the lock within 3 seconds. It’s no necessary

instead with motorized locks: in this case indeed, the motor moves the bolt which remains in

opening position for about 8 seconds before returning in closing position. In the manual closing

version instead, the bolt can be closed by pressing key for few seconds.

Penalty

Four consecutive wrong codes initiate a four minutes penalty time. During this period, LCD

displays the message “PENALTY” and no operation is allowed.

Time Delay

Programmable time delay in between 0 and 99 minutes. Programmable opening window in

between 1 and 19 minutes.

Dallas keys

It can be programmed for any lock. Available as option for Manager and users (not for Master).

TechMaster keypad only works with Dallas keys created by TECNOSICUREZZA. Upon express

request, the keypad can be set in order to work also with different Dallas keys models.

Power supply

Lock can be powered with:

an ALKALINE 9V battery located in the battery compartment below the keypad;

an internal battery box provided by Tecnosicurezza (6 ALKALINE 1.5 batteries);

A power adapter (ref. N1212) with power supply interface (ref. T6005/W or T6005) both

provided by Tecnosicurezza.

Low battery warning

A long beep together with the message “LOW BATTERY” on the display, indicates a low battery

level which needs immediate replacing.

Silent alarm

With this function enabled, enter an opening code increasing or decreasing by one number

the last code digit (ex. 03-030304 or 03-030302 instead of 03-030303): the lock opens and

simultaneously the output of the alarm interface or I/O interface is activated.

Audit

The lock is able to save the last 6000 operations with time, date, user and operations

description. The keypad can save the last 250 operations. It’s possible to download the events

for locks and keypad by using the Tecnosicurezza DMT Audit software. For further information

refer to the IU_DMT_Audit_XX.

IMPORTANT

Some options/characteristics reported in this user manual, can only be used if previously

10 of 28 IU_ TechMaster_05_eng

User instructions

TechMaster

enabled through the setup software. Thus, please refer to the user manual

IU_TechMaster_setup_XX.

Please contact Tecnosicurezza for further information.

Opening the locks

Users (or Override users): opening without time delay

Power up the keypad. Enter an opening code and insert the Dallas key,

if set-up. LCD displays:

OPEN

Open the lock within 3 seconds.

Users: opening with time delay

Power up the keypad. Enter an opening code and insert the Dallas key,

if set-up.

LCD displays the time delay counting:

TIME DELAY

00:59

At time elapsed, the LCD displays the open window counting time.

OPEN WINDOW

00:01

Press , LCD displays:

ENTER CODE

X X –X X X X X X

Enter an opening code and insert the Dallas key, if set-up. LCD displays:

OPEN

Open the lock within 3 seconds.

Manager (or Override Manager): opening without time delay

Power up the keypad. Press for opening with Manager code or

press it two times for opening with Manager Ovr code. LCD displays:

MANAGER CODE

X X X X X X

Enter Manager code and insert the Dallas key, if set-up (or enter

Manager Ovr code and insert the Dallas key, if set-up). LCD displays:

OPEN

Open the lock within 3 seconds.

Manager (or Override Manager): opening with time delay

Power up the keypad. Press for opening with Manager code or

press it two times for opening with Manager Ovr Code. LCD displays:

MANAGER CODE

X X X X X X

Enter Manager code and insert the Dallas key, if set-up (or enter

Manager Ovr Code and insert the Dallas key, if set-up). LCD displays the

time delay counting:

TIME DELAY

00:59

At time elapsed, the LCD displays the open window counting time.

OPEN WINDOW

00:01

Press , LCD displays:

ENTER CODE

X X –X X X X X X

MANAGER

X X X X X X

Otros manuales para TechMaster

Tabla de contenidos

Otros manuales de Cerrar de Tecnosicurezza

Tecnosicurezza

Tecnosicurezza TechMaster Manual de usuario

Tecnosicurezza

Tecnosicurezza AuditLine T6530/DL Manual de usuario

Tecnosicurezza

Tecnosicurezza Pulse Manual de usuario

Tecnosicurezza

Tecnosicurezza TechMaster Manual de usuario

Tecnosicurezza

Tecnosicurezza DigiTech Series Manual de usuario

Tecnosicurezza

Tecnosicurezza Pulse Pro Manual de usuario

Tecnosicurezza

Tecnosicurezza TechMaster T9530/GR Manual de usuario

Tecnosicurezza

Tecnosicurezza MiniTech T52 Series Manual de usuario

Tecnosicurezza

Tecnosicurezza Pulse Pro Manual de usuario

Tecnosicurezza

Tecnosicurezza DigiTech Manual de usuario

Tecnosicurezza

Tecnosicurezza Pulse T6430 Manual de usuario

Tecnosicurezza

Tecnosicurezza TechMaster Manual de usuario

Tecnosicurezza

Tecnosicurezza Pulse 2 Manual de usuario

Tecnosicurezza

Tecnosicurezza StraightBolt EM3520 Manual de usuario

Tecnosicurezza

Tecnosicurezza MiniTech Instrucciones de operación

Tecnosicurezza

Tecnosicurezza DigiTech Manual de usuario

Tecnosicurezza

Tecnosicurezza MiniTech TSMINI-4 Manual

Tecnosicurezza

Tecnosicurezza T9510/BR Manual de usuario

Tecnosicurezza

Tecnosicurezza Pulse Pro Manual de usuario

Tecnosicurezza

Tecnosicurezza KL3909 Instrucciones de instalación

Tecnosicurezza

Tecnosicurezza MiniTech Manual de usuario

Tecnosicurezza

Tecnosicurezza Pulse Pro T6630/GRP Manual de usuario

Tecnosicurezza

Tecnosicurezza MiniRotoboIt UR4020 Guía del usuario

Tecnosicurezza

Tecnosicurezza MiniTech Manual de usuario

Manuales populares de Cerrar de otras marcas

Magic

Magic 105 Manual de usuario

Gantner

Gantner GAT NET.Lock 7020 System Guía rápida

Wittkopp

Wittkopp Insys 7202 Manual de usuario

Dorma

Dorma Studio Classic Manual de usuario

Securam

Securam ECSL-601 Manual de usuario

Sudhaus

Sudhaus 3003 Manual de usuario

Safety 1st

Safety 1st 48517 Manual de usuario

Pado

Pado FDS-10 Manual de usuario

Esco

Esco systeQ Series Manual de usuario

COMPX

COMPX National D8951 Manual de usuario

secureo

secureo Key Box Manual de usuario

Stock Loks

Stock Loks C8713 Manual de usuario

COMPX

COMPX 1T-058 Manual del propietario

Auslock

Auslock T11 Manual de usuario

ELCOM

ELCOM 7205 Manual de usuario

Stealth SAFES

Stealth SAFES ShadowVault Manual de usuario

Knox

Knox KeySecure 5 Manual de usuario

Kwikset

Kwikset 48334/01 Manual de usuario