Tecnosicurezza Pulse Pro Manual de usuario

IU_PulsePro_easy_01_eng

Default codes

Manager

6 0 - 1 2 3 4 5 6 +

Optional Dallas key

User 2

0 2 - 0 2 0 2 0 2 +

Optional Dallas key

User 3

0 3 - 0 3 0 3 0 3 +

Optional Dallas key

User x

x x –x x x x x x +

Optional Dallas key

Dallas key

In the event that the user is composed of "code + Dallas key", before or after entering the code, the Dallas key must be

placed on the appropriate Dallas key reader.

Override user

The override users open without waiting the time delay. In the default programming they are set in dual code opening but,

upon request, the single opening mode can also be set.

Silent alarm

It is activated by increasing or decreasing the last digit by one number when entering the opening code.

Penalty

After four attempts to enter an incorrect code, the lock starts a 4-minute delay period. Each attempt to enter the code

within the 4 minutes delay period restarts the count.

Low battery warning

A long beep during opening indicates a low battery level.

Replace immediately the low battery with a new Alkaline battery.

Sound signals

A double beep normally indicates a correct operation. A long beep indicates an incorrect operation and the end of the

operation itself.

Recommendations

Do not use easily identifiable codes such as 123456, dates of birth or other personal information.

Pulse Pro

User instructions

Opening

(It is recommended to change the factory code before use and to safely store the new code)

Enter the opening code (default Manager code 60-123456).

If the code is correct, the keypad will beep twice.

If programmed, the time delay count starts. The LED flashes every 2 seconds.

A beep every 2 seconds indicates the end of the time delay count.

Enter the opening code. The keypad beeps twice.

Open the safe door within 4 seconds.

Dual code opening

(It is recommended to change the factory code before use and to safely store the new code)

Enter the opening code (default Manager code 60-123456).

If the code is correct, the keypad will beep twice.

If programmed, the time delay count starts. The LED flashes every 2 seconds.

A beep every 2 seconds indicates the end of the time delay count.

Enter both opening codes . The keypad beeps twice.

Open the safe door within 4 seconds.

Change code

(Safely store the new code and perform various opening / closing tests before closing the safe door)

To be performed with the door open!

Press and hold until the double beep. The LED remains on.

Enter the ID of the user whose code is to be changed.

Enter the old code.

Enter the new code.

Confirm the new code.

Perform various opening / closing tests before closing the safe door.

IU_PulsePro_easy_01_eng

User instructions

PulsePro

Activate a new user

Press and hold until the double beep. The LED remains on.

Enter the Manager code. The keypad beeps twice.

Enter the ID of the user to be installed.

If the user is available, the keypad beeps twice.

Enter the code to be associated with the user (and the Dallas key if necessary).

Enter again the code to confirm it (and the Dallas key if necessary).

Disable/Enable users

(Function not available if the dual code opening is activated)

Press and hold until the double beep. The LED remains on.

Enter the Manager code. The keypad beeps twice.

All users are disabled/enabled.

Delete an user

Press and hold until the double beep. The LED remains on.

Enter the Manager code. The keypad beeps twice.

Enter the ID of the user to be deleted.

The keypad beeps twice. The user is deleted.

Membrane test

Press and hold until the double beep. The LED remains on.

Enter the folowing sequence of keys:

At the end the LED turns off.

A damaged key is indicated with a long beep.

ERC

(Emergency Rescue Code)

If the function is available,

allows to perform an emergency opening in case of loss of all the opening codes.

Press and hold until the double beep. The LED remains on.

Enter the ERC code (98 –X X X X X X X X ). The LED flashes.

Lock has been restored with the standard codes.

Time delay

(Time Delay programmable from 0 to 99 minutes; Open Window from 1 to 19 minutes)

Press and hold until the double beep. The LED remains on.

Enter the Manager code. The keypad beeps twice.

Enter the values for the time delay and the open window in two digits (e.g. 10 and 05).

Confirm the values for the time delay and the open window in two digits (e.g. 10 and 05).

Attention, the time delay can only be lowered in the open window.

IU_PulsePro_easy_01_eng

User instructions

PulsePro

10 USERS

Manager

management

Second

Manager

Second

Master

Configuration

number

Manager

management

Second

Manager

Second

Master

Configuration

number

10 Users

10 Users in dual

code opening

✓

✓

✓

-

✓

✓

-

✓

✓

-

✓

✓

10 USERS + 1 OVERRIDE USERS

Manager

management

Second

Manager

Second

Master

Configuration

number

10 Users + 1

Override user

✓

✓

-

✓

-

✓

-

✓

10 USERS + 1 OVERRIDE USER, Dual code opening

Manager

management

Second

Manager

Second

Master

Configuration

number

Manager

management

Second

Manager

Second

Master

Configuration

number

10 Users + 1

Override user in

dual code opening

with all users

10 Users + 1

Override user. All

users in dual code

opening

✓

✓

✓

-

✓

✓

-

✓

✓

-

✓

✓

Select a configuration

(to be performed with the LOCK OPEN!)

Press and hold until the double beep. The LED remains on. If in pre-setup mode, skip the next two

steps.

Enter the Manager code. The LED flashes.

Enter the Master code. The LED remains on.

Enter the ID of the chosen configuration. The keypad beeps twice.

Confirm the ID of the chosen configuration. The keypad beeps twice.

Enter the format of the date (0=day/month/year, 1=month/day/year). The LED flashes.

The keypad beeps twice. The led goes off.

IU_PulsePro_easy_01_eng

User instructions

PulsePro

50 USERS

Manager

management

Second

Manager

Second

Master

Configuration

number

Manager

managemnt

Second

Manager

Second

Master

Configuration

number

50 Users

50 Users with dual

code opening

✓

✓

✓

-

✓

✓

-

✓

✓

-

✓

✓

50 USERS+ 10 OVERRIDE USERS

Manager

management

Secondo

Manager

Secondo

Master

Configuration

number

50 Users + 10

Override users

✓

✓

-

✓

-

✓

-

✓

50 USERS + 10 OVERRIDE USERS, Dual mode opening

Manager

management

Second

Manager

Second

Master

Configuration

number

Manager

management

Second

Manager

Second

Master

Configuration

number

50 Users + 10

Override users in

dual code opening

with all users

50 Users + 10

Override users. All

users in dual code

opening

✓

✓

✓

-

✓

✓

-

✓

✓

-

✓

✓

Further information

For the complete manual and further information on the product's features, please visit www.tecnosicurezza.it

GLOBAL HEADQUARTERS

USA HEADQUARTERS

SPAIN HEADQUARTERS

Tecnosicurezza SpA

Tecnosicurezza Inc.

Tecnosicurezza Sa

Via Cesare Battisti. 276

50, Thomas Lane

C/Menor, 4 - Nave 10

37057 San Giovanni Lupatoto

Verona

Versailles, KY 40383

Pol. Ind La Mina 28770

Colmenar Viejo

Tel.+39 045 826 64 70

Tel.+1 859 490 89 30

Tel.+34 91 804 33 91

Fax. +39 045 826 64 69

Fax.+34 91 804 32 63

info@tecnosicurezza.it

info@usatecno.com

info@tecnosicurezza.es

Otros manuales para Pulse Pro

Otros manuales de Cerrar de Tecnosicurezza

Tecnosicurezza

Tecnosicurezza MiniTech Instrucciones de operación

Tecnosicurezza

Tecnosicurezza StraightBolt EM3520 Manual de usuario

Tecnosicurezza

Tecnosicurezza MiniTech T52 Series Manual de usuario

Tecnosicurezza

Tecnosicurezza DigiTech Manual de usuario

Tecnosicurezza

Tecnosicurezza KL3909 Instrucciones de instalación

Tecnosicurezza

Tecnosicurezza DigiTech Manual de usuario

Tecnosicurezza

Tecnosicurezza MiniTech Manual de usuario

Tecnosicurezza

Tecnosicurezza Pulse T6430 Manual de usuario

Tecnosicurezza

Tecnosicurezza Pulse Pro Manual de usuario

Tecnosicurezza

Tecnosicurezza T6530/DL Manual de usuario

Tecnosicurezza

Tecnosicurezza DigiTech Series Manual de usuario

Tecnosicurezza

Tecnosicurezza Pulse Manual de usuario

Tecnosicurezza

Tecnosicurezza T9510/BR Manual de usuario

Tecnosicurezza

Tecnosicurezza TechMaster Manual de usuario

Tecnosicurezza

Tecnosicurezza Pulse 2 Manual de usuario

Tecnosicurezza

Tecnosicurezza AuditLine T6530/DL Manual de usuario

Tecnosicurezza

Tecnosicurezza TechMaster Manual de usuario

Tecnosicurezza

Tecnosicurezza Pulse Pro T6630/GRP Manual de usuario

Tecnosicurezza

Tecnosicurezza MiniRotoboIt UR4020 Guía del usuario

Tecnosicurezza

Tecnosicurezza Pulse Pro Manual de usuario

Tecnosicurezza

Tecnosicurezza TechMaster Manual de usuario

Tecnosicurezza

Tecnosicurezza MiniTech Manual de usuario

Tecnosicurezza

Tecnosicurezza MiniTech TSMINI-4 Manual

Tecnosicurezza

Tecnosicurezza TechMaster T9530/GR Manual de usuario

Manuales populares de Cerrar de otras marcas

Magic

Magic 105 Manual de usuario

Gantner

Gantner GAT NET.Lock 7020 System Guía rápida

Wittkopp

Wittkopp Insys 7202 Manual de usuario

Dorma

Dorma Studio Classic Manual de usuario

Securam

Securam ECSL-601 Manual de usuario

Sudhaus

Sudhaus 3003 Manual de usuario

Safety 1st

Safety 1st 48517 Manual de usuario

Pado

Pado FDS-10 Manual de usuario

Esco

Esco systeQ Series Manual de usuario

COMPX

COMPX National D8951 Manual de usuario

secureo

secureo Key Box Manual de usuario

Stock Loks

Stock Loks C8713 Manual de usuario

COMPX

COMPX 1T-058 Manual del propietario

Auslock

Auslock T11 Manual de usuario

ELCOM

ELCOM 7205 Manual de usuario

Stealth SAFES

Stealth SAFES ShadowVault Manual de usuario

Knox

Knox KeySecure 5 Manual de usuario

Kwikset

Kwikset 48334/01 Manual de usuario