Tecnoalarm TP8-64 Manual de usuario

USER MANUALUSER MANUAL

USER MANUAL

Release: 3.0

Update: June2009

Language: English

FWversion: 2.3

TP8-64TP8-64

TP8-64

TP8-64 METTP8-64 MET

TP8-64 MET

8 - 64 ZONES

CONTROL PANEL

II UserManual-TP8-64

The features of the control panel can be subject to change without notice.

Unauthorized reproduction or distribution of this manual, or any portion of it, on any device and in any form, is

prohibited.

The contents of this manual may be subject to change without notice.

III

TP8-64-UserManual

CONFORMITY

Hereby,Tecnoalarmsrldeclaresthatthepresentequipmentisincompliancewiththeessentialrequirementsand

otherrelevantprovisionsoftheR&TTE1999/05/ECdirective.

Thedeclarationofconformityisavailableonthewebsite:www.tecnoalarm.com.

IV UserManual-TP8-64

TP8-64 - User Manual Index 1

INDEX

1. GENERAL FEATURES

1.1 CODES 1-1

1.1.1 Master menu 1-1

1.1.2 Standard user menu 1-2

1.2 ELECTRONIC KEYS 1-2

1.3 CONTROL BY TELEPHONE 1-2

1.3.1 Skip answering machine 1-2

1.4 PROGRAMS 1-3

1.5 COMPOSITION OF THE CONTROL PANEL 1-3

2. SIGNALING

2.1 LED SIGNALING OF THE CONSOLES 2-1

2.1.1 Alarm LED - Red 2-3

2.1.2 Control LED - Yellow 2-5

2.2 LED SIGNALING OF THE TP SDN ELECTRONIC KEYPAD 2-6

2.2.1 Program alarm LED - Yellow 2-6

2.2.2 General alarm LED - Red 2-6

2.2.3 Keypad status LED - Green 2-7

2.2.4 Program status LED - Red 2-7

2.3 LED SIGNALING OF THE TP SK6N KEY READER WITH MINI KEYPAD 2-8

2.3.1 Program alarm LED - Red 2-8

2.3.2 General alarm LED - Red 2-8

2.3.3 Program status LED - Yellow 2-9

2.3.4 Zone status LED - Yellow 2-9

2.3.5 Key LED - Green 2-9

2.4 LED SIGNALING OF THE ATPK KEY READER 2-10

2.4.1 Program status LED - Red, yellow, green 2-10

2.4.2 Program and general alarm LED - Yellow 2-10

2.5 RESET OF ALARM MEMORY SIGNALING 2-11

2.5.1 Reset of LED signaling with master code 2-11

2.5.2 Reset of LED signaling with installer code (tamper LED signaling) 2-11

3. PROGRAMMING (MASTER CODE REQUIRED)

3.1 ACTIVATION/DEACTIVATION REMOTE CONTROLS 3-3

3.2 CLOCK SETTING 3-3

3.3 FUNCTIONS 3-3

3.4 CREATION/MODIFICATION OF THE PROGRAMS 3-3

3.5 TIMERS AND ACCESS PERIODS 3-4

3.5.1 Timers 3-4

2.5.2 Access periods 3-5

3.6 PROGRAMMING OF THE TELEPHONE PARAMETERS 3-6

3.6.1 Settings 3-6

3.6.2 PABX switchboard 3-6

3.6.3 Channels (A...H) 3-7

3.6.4 Call back 3-7

3.6.5 Mobile phone 3-7

3.7 PROGRAMMING OF THE CODES 3-8

3.7.1 Master code 3-8

3.7.2 Standard user codes 3-9

3.8 PROGRAMMING OF THE KEYS 3-10

3.8.1 Access periods 3-10

3.8.2 Programs 3-10

Index User Manual - TP8-64

3.8.3 Attributes 3-11

3.8.4 Learning 3-11

3.9 PROGRAMMING OF THE WIRELESS KEYS 3-11

3.9.1 Periods 3-11

3.9.2 Association buttons 3-12

3.9.3 Attributes 3-12

3.9.4 Learning 3-12

3.10 PROGRAMMING OF THE CONSOLES 3-13

3.11 EXCLUSION OF MODULES/ZONES 3-13

3.11.1 Exclusion of zones 3-13

3.12 TEST 3-14

3.12.1 Zone test 3-14

3.12.2 Indoor siren test 3-14

3.12.3 Outdoor siren test 3-14

3.12.4 Viewing of the firmware version 3-14

3.12.5 Viewing of the vocabulary version 3-14

3.12.6 Viewing of the LED status 3-14

3.12.7 GSM module test 3-15

3.13 ENABLING OF REMOTE ACCESS 3-15

4. CONTROL BY CONSOLE

4.1 ARMING 4-4

4.1.1 Arming with master code 4-6

4.1.2 Arming with standard user code 4-7

4.1.3 Quick arming (if enabled) 4-7

4.1.4 Arming through key zone 4-8

4.1.5 Automatic arming 4-8

4.1.6 Arming during access periods 4-8

4.1.7 Arming denied 4-9

4.2 DISARMING 4-9

4.2.1 Disarming with master code 4-9

4.2..2 Disarming with standard user code 4-9

4.2.3 Disarming under duress (if enabled) 4-10

4.2.4 Quick disarming (if enabled) 4-10

4.2.5 Disarming through key zone 4-10

4.2.6 Automatic disarming 4-10

4.2.7 Disarming during access periods 4-10

4.3 BY-PASS 4-10

4.3.1 By-pass activation with code 4-10

4.3.2 Automatic by-pass activation 4-11

4.3.3 Activation of by-pass during the access periods 4-11

4.3.4 Deactivation of by-pass 4-11

4.3.5 Automatic deactivation of by-pass 4-11

4.3.6 Deactivation of by-pass on expiry of maximum by-pass time 4-11

4.4 ACTIVATION/DEACTIVATION REMOTE CONTROLS 4-12

4.5 MANUAL COMMUNICATOR BLOCK 4-12

4.6 VIEWING OF THE EVENT BUFFER 4-13

4.7 RESET OF LED SIGNALING 4-14

4.7.1 Reset of LED signaling with master code 4-14

4.7.2 Reset of LED signaling with installer code (tamper LED signaling) 4-14

QUICK COMMANDS - OPERATIONS WITHOUT CODE

4.8 RELEASE OF PANIC ALARM 4-15

4.9 VIEWING OF ZONE STATUS 4-15

4.10 VIEWING ALARM MEMORY 4-15

TP8-64 - User Manual Index 3

5. CONTROL BY KEYPOINT

5.1 CONTROL BY TP SK6N KEY READER WITH MINI KEYPAD 5-1

5.1.1 Arming 5-1

5.1.2 Disarming 5-3

5.1.3 By-pass 5-3

5.1.4 Release of panic alarm 5-4

5.2 CONTROL THROUGH TP SKN INTERFACE FOR ELECTRONIC KEYS AND

ATPK KEY READERS 5-4

5.2.1 Arming 5-4

5.2.2 Disarming 5-6

5.2.3 By-pass 5-7

5.3 SPECIAL OPERATING CONDITIONS 5-8

5.3.1 False key alarm 5-8

5.3.2 Simultaneous arming by several control units 5-8

5.3.3 Simultaneous arming with code and key 5-8

5.3.4 Automatic disarming for alarm 5-8

5.3.5 Automatic communicator block 5-8

5.3.6 Trouble/general alarm 5-8

5.4 CONTROL BY TP SDN ELECTRONIC KEYPAD 5-9

5.4.1 Arming 5-9

5.4.2 Disarming 5-11

5.4.3 By-pass 5-11

5.4.4 Special operating conditions 5-12

5.5 TX240-3 WIRELESS KEY 5-13

5.5.1 Arming 5-13

5.5.2 Disarming 5-13

5.5.3 By-pass 5-14

5.5.4 Learning 5-14

6. CONTROL BY TELEPHONE

6.1 CALL FOR SYSTEM STATUS CHECK 6-1

6.1.1 System status check 6-1

6.1.2 Arming/disarming 6-1

6.1.3 Remote activation/deactivation of devices 6-2

6.1.4 Remote digital verification RDV 6-2

6.1.5 Opening message 6-3

6.2 RECEPTION OF AN ALARM CALL 6-3

Index User Manual - TP8-64

TP8-64 - User Manual Notes I

IMPORTANT NOTES

The system TP8-64 is very easy to use.

Thus, we recommend to arm the system every time you leave your rooms unattended, even if for short periods

of time.

For your own safety keep all the codes secret.

In case you are robbed of your keys or you lose them, contact your installer immediately for their replacement.

APPLICATION NOTES

When you are at home

Never leave the doors and windows open. If possible, arm the system partially in order to protect the perimeter

and the rooms that you do not use.

When you go out

Verify thoroughly that all the doors and windows protected are closed.

Verify on the console that the system is functioning correctly and that there is no alarm or error signaling

active.

Arm the system completely (all the programs needed to protect all the zones of the system).

When you go on holiday

Verify that all the batteries of the system have been checked and replaced with the frequency prescribed by

the installer.

Verify thoroughly that all the doors and windows protected are closed.

Arm the system for test and verify that it works correctly (sirens, detectors etc.).

Arm the system completely (all the programs needed to protect all the zones of the system).

Notes User Manual - TP8-64

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de seguridad de Tecnoalarm

Tecnoalarm

Tecnoalarm SAEL 2010 BUS Manual de usuario

Tecnoalarm

Tecnoalarm Evolution EV SAEL BWL Manual de usuario

Tecnoalarm

Tecnoalarm evolution EV SIREL BWL Manual de usuario

Tecnoalarm

Tecnoalarm SIRTEC BUS Manual de usuario

Tecnoalarm

Tecnoalarm SAEL 2010 LED Manual de usuario

Tecnoalarm

Tecnoalarm EV REDWAVE BWL Manual de usuario

Tecnoalarm

Tecnoalarm TWINTEC MASK BUS Manual de usuario

Tecnoalarm

Tecnoalarm TWINTEC MASK 18 Manual de usuario

Manuales populares de Sistema de seguridad de otras marcas

Inner Range

Inner Range Concept 2000 Manual de usuario

Climax

Climax Mobile Lite R32 Instrucciones de montaje

CADDX

CADDX NX-6 Manual de usuario

FBII

FBII XL-31 Series Manual de usuario

Johnson Controls

Johnson Controls PENN Connected PC10 Manual de usuario

Aeotec

Aeotec Siren Gen5 Manual de usuario

Blaupunkt

Blaupunkt SA 2700 Manual de usuario

IDEAL

IDEAL Accenta Manual del propietario

AJAX

AJAX DoubleButton Manual de usuario

Swann

Swann SW-P-MC2 Manual de usuario

Ecolink

Ecolink Siren+Chime Manual de usuario

Digital Monitoring Products

Digital Monitoring Products XR150 Manual de usuario

EDM

EDM Solution 6+6 Wireless-AE Manual de usuario

Highway Safety Group

Highway Safety Group EA401 Manual de usuario

Siren

Siren LED GSM Manual de usuario

Detection Systems

Detection Systems 7090i Instrucciones de montaje

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manual de usuario

Siemens

Siemens FDM273 Manual de usuario