Technogym Element+ Manual de usuario
E L E M E N T +
E S S E N T I A L S T R E N G T H
1
Lat Machine
User manual
2
Lat Machine
Contents
Identification of the manufacturer and the equipment .............. 3
Description of the equipment.................................................... 4
Technical data ........................................................................... 5
Safety labels and warnings ....................................................... 6
Place of installation ................................................................... 7
Unpacking ................................................................................. 8
Lifting and handling the equipment........................................... 9
Routine maintenance ............................................................. 10
Replacing the padded components........................................ 12
Replacing the cable ................................................................ 13
Adjusting cable tension ........................................................... 16
Replacing the spring hook ...................................................... 17
Technical Service..................................................................... 18
Storage.................................................................................... 19
Disposing of the equipment .................................................... 19
Using the equipment .............................................................. 20
3
Lat Machine
Controllare periodicamente lo stato di usura
Peso MAX utente: 180 kg
Peso MX di lavoro: vedi pacco pesi
Tipo: IC EN957 - 1/2
ELEMENT+ SILVER-BLU AVI CB350C0 - ALK0GGGK
Maximum user’s body weight: 120 kg
Maximum training weight: see weight block
CB350C0900001 c
AB
C
D
E
Identification of the manufacturer and the equipment
The identification plate of the equipment and manufacturer, affixed on the frame behind the weight stack, gives the following details:
AName and address of the manufacturer
BCE Mark
CSerial number
DCautions and maximum user weight
EEquipment classification
4
Lat Machine
E
A
B
C
D
F
C
Description of the equipment
Seat (A): where the user sits to perform the exercise.
Bar (B): moved by the user to perform the exercise.
Rollers (C): allow you to use workloads equal to or higher than body
weight. Their position is adjustable in depth by means of the rollers
lever (D) after having released it by operating the button positioned
on it.
Weight stack (E): the bar, operated by the user, moves the weights
along two guides by means of a cable. A pin (F) is used for selecting
the load in order to adjust the exercise effort level.
5
Lat Machine
1421 mm
(56")
1202 mm
(47")
1205 mm
(47")
799 mm
(31")
205 kg (596 lb)
80 kg (160 lb)
Technical data
6
Lat Machine
Safety labels and warnings
The equipment does not have any sharp corners.
All the parts which come into contact with the body are adequately protected with rubber coverings or padding.
WARNINGS
During all operations involving transport, maintenance and cleaning, pay attention to any part of the equipment where
body parts may become trapped.
It is important to pay attention to the labels affixed to the equipment, as they provide information about possible risks
and hazards.
We recommend immediately replacing the labels when they become damaged or difficult to read.
Pay particular attention to the parts of the equipment with labels indicating the “DANGER OF
SQUASHING”.
7
Lat Machine
Place of installation
To guarantee safe, comfortable and effective use of the equipment, the place of installation must comply with certain specific requirements;
in particular, before choosing where to install the equipment it is recommended to check the following:
- temperature between +10°C and +25°C;
- sufficient ventilation to maintain a humidity level between 20% and 90%, when the equipment is in use;
- adequate lighting, so that the physical exercise takes place in pleasant and relaxing conditions;
- sufficient clearance on all sides of the equipment, taking into account its maximum dimensions during the movements, necessary
for safety reasons;
- a flat, stable and vibration-free floor surface, with adequate carrying capacity for the equipment’s weight.
If the equipment is installed in a public recreational area, the place must conform to all the requirements prescribed by the regulations
in force.
WARNING
The equipment must be installed and used in a place whose access and supervision are specifically controlled by the
owner.
8
Lat Machine
Unpacking
The equipment is supplied fully assembled in a carton and protected by cellophane wrapping, and secured to a pallet.
The equipment can be lifted and handled using normal lifting machine.
In order to ensure the safety of persons and property, carefully determine the lifting and handling machine used as a function of the
place of installation.
To remove the equipment from the packing:
- cut the carton along the bottom and pull it away from the top;
- remove the cellophane by pulling it away from the top;
- untie the straps securing the equipment to the pallet;
- lift the equipment from the weight stack side and place it on the ground.
WARNINGS
Given the weight of the equipment, we recommend that more than one person be involved in lifting it.
The packing materials (boxes, bags, etc.) must not be left within the reach of children, as they constitute a possible
hazard; nor must they be disposed of in the environment.
9
Lat Machine
Lifting and handling the equipment
To move the equipment, use normal lifting and handling machine.
WARNING
The equipment must be moved with great care, due to the risk of it tipping over.
Lift the equipment from the weight stack side, as shown in the figure.
WARNINGS
Given the weight of the equipment, we recommend that more than one
person be involved in lifting it.
It is recommended to place some padded material between the frame
and the lifting machine.
10
Lat Machine
Routine maintenance
WARNINGS
The safety of the equipment is assured only on condition that it is carefully inspected for signs of damage and/or wear
every two weeks.
Replace defective and worn components immediately, or alternatively remove the equipment from service.
The equipment should always be kept clean and free of dust, in compliance with good hygiene practice, especially if it is used in a gym
or by more than one person.
To clean the padded parts, use a moist cloth or a sponge and mild soap.
Every week, clean the outer parts of the equipment using a damp sponge.
WARNING
Be careful not to rub with excessive force on the drawings and instructions shown on the labels.
To lubricate the weight stack guides:
- use a soft cloth to remove any dust and oil residues from the guides;
- slightly moisten the cloth with the oil supplied;
- using this cloth, apply a very thin layer of lubricant over the guides, being careful not to apply too much.
For maintenance actions not described in this manual, call in the Technogym Technical Service.
Otros manuales para Element+
1
Tabla de contenidos
Otros manuales de Equipo de fitness de Technogym
Technogym
Technogym ELEMENT Multipower Manual de usuario
Technogym
Technogym Climb Manual de usuario
Technogym
Technogym D93TNL Cómo utilizar
Technogym
Technogym Rotex 600 XTPRO Manual de usuario
Technogym
Technogym Selection Multi Hip Manual de usuario
Technogym
Technogym SKILLRUN UNITY 5000 Manual de usuario
Technogym
Technogym Bike Forma Manual de usuario
Technogym
Technogym Unica Evolution Manual de usuario
Technogym
Technogym CROSS FORMA Manual de usuario
Technogym
Technogym Selection Abductor Manual de usuario
Technogym
Technogym Recline 500SP Manual de usuario
Technogym
Technogym Kinesis Station Manual de usuario
Technogym
Technogym Selection Low Row Manual de usuario
Technogym
Technogym FLEXability ME05 Manual de usuario
Technogym
Technogym MA05 Manual de usuario
Technogym
Technogym WAVE EXCITE+ Manual de usuario
Technogym
Technogym element leg extension Manual de usuario
Technogym
Technogym Bike MED Manual de usuario
Technogym
Technogym PLURIMA Manual de usuario
Technogym
Technogym TOP EXCITE LIVE Manual de usuario
