Technaxx TX-44+ Wild Cam Camouflage Manual de usuario
0
Technaxx
®
Wild Cam Camouflage TX–44+
User Manual
The Declaration of Conformity for this device is under the
Internet link: www.technaxx.de/ (in bottom bar
“Konformitätserklärung”). Before using the device the first time,
read the user manual carefully.
Service phone No. for technical support: 01805 012643 (14
cent/minute from German fixed-line and 42 cent/minute from
Features
FullHD Security camera for indoor and outdoor use
Video resolution 1920 x 1080 (1080P)
Ideal for viewing wild animals and for monitoring
houses
2.7” CMOS sensor with 2 mega pixels
Video and photo function are selectable
Standby time up to ~ 290 days
Motion and infrared sensor for night shots
1.2 seconds triggering time
Motion Detection Distance up to ~ 15m
IPX4 splash water proof
Easy handling and installation
1
Table of Contents
1. Introduction………..…………………..……..…....
2
System Requirements...……...……………..…
2
2. Getting to know your camera……………………..
3
Part Names (front and rear view)..……..…
3
3. Basic Camera Operation............…………………
4
Installing Batteries and MicroSD Card.............
5
Power On….......…………….…………….…….
7
4. Operation Mode…………….………..…………….
8
PIR Photo........................................................
9
PIR Video........................................................
11
Time Lapse......................................................
14
5. Setting..........……………...……….………………
16
6. TEST Mode………………...………………………
22
7. Surveillance Mode…………………………………
24
8. Playback...................................…..……………...
26
Download.............…………….……………….
26
Playback from PC......….......…………………2
7
Playback from Mac......….......…………………
27
9. Appendix……………………………………………
28
Specifications…………………………………..
28
UI Flow.............................................................
29
10. Warnings & Hints...............................................
31
2
1. Introduction
System Requirements
PC System Requirement
Intel
®
Core2Duo 1.8G or AMD equivalent CPU
Hi-speed USB2.0 port
1 GB RAM internal memory minimum
HD color monitor
nVIDIA GeForce MX440 or above, AMD (ATi)
Radeon 9200 or above
DirectX 9.0 or higher
Windows
®
XP (SP2 or higher) / Windows Vista™ /
Windows 7™ / Windows 8™
Note: If your system is Windows XP Service Pack I,
please go to www.microsoft.com. It’s free to update your
system to Windows XP SP II.
Mac System Requirement
Power PC G5 or Intel
®
Core Duo processor
recommended
Hi-speed USB2.0 port
1 GB RAM internal memory minimum
HD color monitor
Mac OS™ 10.5x or above
3
2. Getting to know your camera
Part Names
Front View
Rear View
4
3. Basic Camera Operation
Installing Batteries and SD Card
Release 2 Fastener Locks of the camera.
Then take out the Rear Cover.
5
Make sure the Power Switch of the camera is OFF.
Install the MicroSD card. Be sure to observe the correct
polarity with clipped corner on the card to the right. All the
pictures and videos will be saved in the memory card.
Install 8 brand new alkaline AA cell batteries in the battery
box. Make sure to observe correct polarity.
6
Put the Battery Box into the Battery Room of the
camera and make sure to observe correct polarity.
Press the Battery Box to the end of the Battery Room.
Make sure the Battery Box has fixed in the Battery Room.
7
Power On
Slide the Power Switch to ON in the left side.
It will initial the camera system. Wait until the LCD display
the default mode on the preview screen.
Slide the Power Switch to the right side to turn off the
camera.
8
4. Operation Mode
Define use which operation mode to record image.
Power On the camera.
Press the Menu button to enter the Main Menu.
Use the Up / Down key and change the Menu to
Operation Mode. (Operation Mode (default)
/
Setting
/
Version)
9
PIR PHOTO
In OPERATION MODE menu, press the OK Button then
the mode item is blinking.
1. Use Up / Down Keys to change the operation mode
to PIR PHOTO then press OK Button again. (PIR
PHOTO (default) / PIR VIDEO / TIME LAPSE)
2. Use Up / Down Keys to change settings of PIR
PHOTO.
3. Press the Menu Button and go back to the
OPERATION MODE menu.
4. Press the Menu Button again to exit the main menu.
Tabla de contenidos
Otros manuales de Cámara de seguridad de Technaxx
Technaxx
Technaxx TX-28 Manual de usuario
Technaxx
Technaxx TX-145 Manual de usuario
Technaxx
Technaxx 4461 Manual de usuario
Technaxx
Technaxx TX-23 Manual de usuario
Technaxx
Technaxx TX-75 Manual de usuario
Technaxx
Technaxx TX-44 Wild Cam Manual de usuario
Technaxx
Technaxx TX-28 Manual de usuario
Technaxx
Technaxx TX-28 Manual de usuario
Technaxx
Technaxx TX-146 Manual de usuario
Technaxx
Technaxx TX-65 Manual de usuario
