TE Connectivity 1055258-1 Manual de usuario

1 of 2

*Trademark

TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.

PRODUCT INFORMATION

1-800-522-6752

This controlled document is subject to change.

For latest revision and Regional Customer Service,

visit our website at www.te.com.

Instruction Sheet

408-8640

13 AUG 15 Rev C

CURRENT

PART NUMBER

DESCRIPTION

HEAD SIZE (mm [in.])

PESET TORQUE

1055258-1

2098-0275-54

Type A for SMA Connectors

7.9 [5/16]

8 in.-lbs

1055516-1

2098-5642-54

Type B for SMA Connectors

7.9 [5/16]

8 in.-lbs

1055850-1

2598-5235-54

Type A for SMC Connectors

5.9 [15/64]

2.6 in.-lbs

1055787-1

2598-5014-54

Type A for SSMA/OSSM* Connectors

6.4 [1/4]

5 in.-lbs

1055789-1

2598-5024-54

Type A for SSMA/OSSM Connectors

4.7 [3/16]

3 in.-lbs

1055853-1

2098-5243-54

Type A for SMB/SMC Connectors

5.6 [7/32]

8 in.-lbs

1055267-1

2098-0299-54

Type A Kit (Includes 2 Heads)

6.4 [1/4] and 7.9 [5/16]

8 in.-lbs

2119704-1

N/A

Type B for OSMM Connectors

4.8 [3/16]

3 in.-lbs +1.0/-0.5

Figure 1

1. INTRODUCTION

The mini torque wrenches listed in Figure 1 are used to properly install or disassemble the described

connectors.

Figure 1 also lists the previous part numbers of the wrenches, description and size, and preset torque for each

wrench.

NOTE

All numerical values in this instruction sheet are in U.S. customary units. Dimensions are in metric units [with U.S. customary

units in brackets]. Figures and illustrations are for reference only and are not drawn to scale.

Reasons for reissue of this instruction sheet are provided in Section 5, REVISION SUMMARY.

2. DESCRIPTION

Each mini torque wrench consists of a protective cover, torque wrench, and a “fillister head” screw (which

permits replacement or change of various wrench heads).

Type A wrench is equipped with an open-end head, and Type B wrench is equipped with a partially- closed

socket head and extension arm. Refer to Figure 2 for head and extension arm replacement part numbers.

The wrenches are designed to be used in the clockwise or counterclockwise direction.

Mini Torque Wrenches

Open-End Head

Screw

Torque

Wrench

Protective

Cover

Type A Wrench

Type B Wrench

Partially Closed

Socket Head

Extension Arm

114 mm [5.5 in.]

ORIGINAL INSTRUCTIONS

408-8640

Rev C

2 of 2

REPLACEMENT

DESCRIPTION (mm [in.])

1055265-1

7.9 [5/16] Type A Open-End Head

1055264-1

6.4 [1/4] Type A Open-End Head

1403926-1

5.9 [15/64] Type A Open-End Head

1406702-1

4.7 [3/16] Type A Open-End Head

1055784-1

7.9 [5/16] Type B Socket Head

1055786-1

Type B Extension Arm

2119705-1

4.8 [3/16] Type B Socket Head

Figure 2

3. OPERATION

NOTE

If a wrench has not been used recently, move the head back and forth several times, listening for audible “clicks”. Moving the

head back and forth spreads lubricant throughout the internal mechanism to improve wrench performance.

Using the appropriate-sized head (refer to Figure 1), and turn the wrench clockwise or counterclockwise until

there is an audible “click”. This “click” indicates that the torque has been achieved.

CAUTION

DO NOT over-tighten the connector with the wrench. Over-tightening could result in inaccurate torque settings.

4. REPLACEMENT (Refer To Figure 3)

Type “A” heads are interchangeable. Remove the screw securing the head to the wrench. Remove the head.

Then install the appropriate head listed in Figure 2.

Type “B” heads are replaceable. Remove the screw securing the head and extension arm to the wrench.

Remove the head and extension arm. Break the press fit between the head and extension arm. Replace the

components in the reverse order of removal. See Figure 2 for replacement parts.

Order replacement parts through your TE Representative, or call 1-800-522-6752, or send a facsimile of your

purchase order to 717-986-7605, or write to:

CUSTOMER SERVICE (38-35)

TYCO ELECTRONICS CORPORATION

PO BOX 3608

HARRISBURG, PA 17105-3608

5. REVISION SUMMARY

Added new part number and related information to tables in Figures 1 and 2

Figure 3

Open-End Head

Screw

Partially Closed

Socket Head

Extension Arm

Este manual sirve para los siguientes modelos

Otros manuales de Herramientas eléctricas de TE Connectivity

TE Connectivity

TE Connectivity 2363758-1 Manual de usuario

TE Connectivity

TE Connectivity 2430768-1 Manual de usuario

TE Connectivity

TE Connectivity 2363592-1 Manual de usuario

TE Connectivity

TE Connectivity SDE-SA Manual de usuario

TE Connectivity

TE Connectivity PRO-CRIMPER III Manual de usuario

TE Connectivity

TE Connectivity 1213819-1 Guía de referencia

TE Connectivity

TE Connectivity 2381460-1 Manual de usuario

TE Connectivity

TE Connectivity 354940-1 Manual de usuario

TE Connectivity

TE Connectivity HT11K Manual de usuario

TE Connectivity

TE Connectivity CERTILOK 9-1579022-1 Manual de usuario

TE Connectivity

TE Connectivity 539744-2 Manual de usuario

TE Connectivity

TE Connectivity 91904 Series Manual de usuario

TE Connectivity

TE Connectivity 46447 Manual de usuario

TE Connectivity

TE Connectivity 2405856-1 Manual de usuario

TE Connectivity

TE Connectivity 2385850-1 Manual de usuario

TE Connectivity

TE Connectivity 2155369 Manual de usuario

TE Connectivity

TE Connectivity 1976330-1 Manual de usuario

TE Connectivity

TE Connectivity SOLARLOK Manual de usuario

TE Connectivity

TE Connectivity 408-160034 Manual de usuario

TE Connectivity

TE Connectivity SDE-SA Manual de usuario

TE Connectivity

TE Connectivity 2393336-1 Manual de usuario

TE Connectivity

TE Connectivity HPi 10 TE Manual de instrucciones

TE Connectivity

TE Connectivity HT11K Manual de usuario

TE Connectivity

TE Connectivity Micro-MaTch 528405-9 Manual de usuario

Manuales populares de Herramientas eléctricas de otras marcas

AEG

AEG OMNI-JS Manual de usuario

SIP

SIP 01533 Manual de usuario

Ribimex

Ribimex PRS499 Manual de usuario

3M Fiber Optic Connector Crimp Tool Manual de usuario

Ryobi

Ryobi P524 Manual de usuario

ROJEK

ROJEK FSN 300A Manual de usuario

Kemper

Kemper 1740PRO Manual de usuario

WABCO

WABCO OptiTire Manual de usuario

EINHELL

EINHELL TE-MS 18/210 Li Manual de usuario

Orgapack

Orgapack OR-T 85 Guía rápida

TOUGHCUT

TOUGHCUT Diamond 400 Manual de usuario

Yaros

Yaros PB-3603 Manual de usuario

Fein

Fein BSS 2.0 E Guía de configuración

Baileigh Industrial

Baileigh Industrial SS-2725 Manual de usuario

Milwaukee

Milwaukee 2674-20 Manual de usuario

Fein

Fein BLs 1.6 Manual de usuario

Princess

Princess Electric Multi Sharpener Manual de usuario

FOREDOM

FOREDOM K.1050 Manual