TANDBERG 880 Manual de usuario

Software version B4

D12788-01

This document is not to be reproduced in whole or in part

without permission in writing from:

User Manual

TANDBERG Videoconferencing System

Introduction

This User Manual is provided to help you make the best use of your TANDBERG system. The TANDBERG

system offers superior quality audio and video in a fully-featured unit.

Main Features:

• Supports videoconferencing via both IP and ISDN networks.

• Selection of up to 768 kbps call quality.

• Built-in MultiSiteTF *- a maximum of 5 sites including a minimum of 1 telephone call can participate in joint

meetings, each benefiting from the same superb audio and video quality. Both Continuous Presence and Voice

Switched mode is supported. A combination of ISDN and IP participants is possible. The TANDBERG

videoconferencing system can also be used purely as an audio-bridge (with an ISDN connection).

• Embedded encryption for call privacy and security.

• Natural Presenter Package* consisting of:

Duo VideoTF - allows participants at the far end to simultaneously watch a presenter on one screen and a

live presentation on the adjoining screen.

Digital ClarityTF - participants enjoy presentations of exceptionally high quality resolution video.

PC PresenterTF - an easily accessible PC connection plug.

PC SoftPresenterTF - show PC images via your LAN connection.

•Natural VideoTF - 60 fields per second true interlaced picture.

•DownspeedingTF - if channels are dropped during a videoconferencing session, the connection is automatically

maintained without interruption.

• Streaming – allows broadcasting of audio/video via an IP network.

• Web-interface for streaming, text chat/closed captioning, system management, diagnostics and software

uploads.

• Worldwide compatibility with other standards-based videoconferencing systems.

INTHIS GUIDE, WE’VE INCLUDED

HELPFUL TIPS AND NOTES. THEY APPEAR

LIKE THIS ONE.

TIP

* - option. To check which options are installed, press MENU and the Quick key ‘System Info’.

TF- TANDBERG first.

TANDBERG Videoconferencing System

Menu structure

The on-screen menu structure is shown below.

Press the MENU key on the remote control to enter/leave the Main Menu.

Call Quality

Advanced

Settings

Main Menu

Press UP/DOWN/LEFT/RIGHT to navigate.

Press OKto select.

MCU Services Audio

Settings

Presentations Video

Settings

Utilities Terminal

Settings

Echo Control

Tones&Volume

ISDN Switch

Type

Line 1 Setup

Line 2 Setup

Adv. ISDN

Settings

ISDN-BRI

Settings

Inputs

Outputs

AGC Settings

Restore Audio

Defaults

Level Settings

Line 3 Setup

Exit

Diagnostics

Focus

Brightness

Whitebalance

Video Name

VGA Settings

Disconnect

Site #

Terminate

Meeting

Request Floor

Release Floor

Chair Control

Terminal

Names Floor to

Site #

Quick Menu

View Site #

End View

Release

Chair

Take Chair

Rel. Floor to

site #

System Info

Call Status

View Current

Settings

Restore

Defaults

Channel

Status

Software

Options

Data Port 1

Language

LAN

Settings

Call

Settings

Network

Profiles

VNC Settings

H.323

Settings

SNMP

Adv. H.323

Streaming

Settings

IP Settings

Test

Subsystem

System

Selftest

TANDBERG Videoconferencing System

The TANDBERG 880

Videoconferencing System

At a glance — the TANDBERG 880 system

Remote Control Microphone

Camera

Codec

TANDBERG Videoconferencing System

Camera

The built-in camera includes a high quality colour camera with a fast pan/tilt/zoom action. The camera is

controlled by the system’s infra-red remote control and operates pan/tilt, focus and zoom.

Codec

The Codec is the heart of the system. The main task for the Codec is the compression of outgoing video, audio

and data, the transmission of this information to a remote site and the decompression of the incoming

information. Hence the name Codec. Intelligent Call Management (ICM) and the SoftMux are features built into the

Codec.

Remote control

The remote control is used to control all functions of the system. There is a separate remote control for operating

the monitor.

Table microphone

The high quality table microphone is specially designed to be used on a table during a video conference.

The ideal location for the microphone is on a flat surface at least 2m (6.5 ft) from the front of the system. The

microphone cable should always point towards the system.

The system will automatically equalize sound levels. Loud and soft voices are picked up and transmitted to the far

end at approximately the same level.

TANDBERG Videoconferencing System

Getting started

System start-up

Your system should be in standby mode. When in standby mode, pressing any key or picking up the remote

control will wake up the system. An incoming call will also wake up the system.

If the system does not respond, make sure the system is switched on by using the On/Off switch located at

the rear of the Codec. After a few seconds you should see a ‘Welcome’ menu on the monitor.

If this does not help, verify that your monitor is switched on. To switch the monitor on you normally push the

power button on the front of the monitor (depending on monitor type).

Welcome menu

After a user-definable boot-up logo is shown, the following menu is shown. This menu should provide you with the

most important system information. For further system information, select the Quick key ‘System Info’.

TANDBERG Videoconferencing SystemGetting started

Basics

The system’s most commonly used functions are accessible directly from the remote control by single key

presses. In addition, the user interface is represented by on-screen menus. Individual items within the menus and

lists can be selected by moving a white highlighter bar to the desired option.

Quick Keys

The three buttons on top of the remote control refer to the blocks at the bottom of the

screen. The text inside the blocks will change depending on which menu is selected.

The three Quick Keys have different colors.

Preset keys

Activate pre-stored camera positions.

Video source keys

Activate connected video sources.

Camera control and menu navigation keys

Frequently used keys allowing you to control your own camera and the far end camera,

control your volume, select and move self-view, switch your microphone off and navigate

in the menu system.

Dialing keys / Preset keys

Used to make a call. The twelve number keys, (0-9), #, * operate in the same way as

on a modern push-button telephone. These buttons are also used when entering a name

into a text field.

TANDBERG Videoconferencing System

Getting started

Making and ending calls

Making a call

To make a call, enter the number or the IP-address of the unit you wish to call using the Dialing keys and

press CONNECT.

ISDN call

The system will, by default, try to connect using Quality: Auto (see table overleaf). If the requested quality

(bandwidth) cannot be established, the system will establish a connection on as high quality as possible.

The SoftMux ensures high reliability and includes the unique Downspeeding feature. If channels are dropped

during a meeting, Downspeeding automatically maintains the connection without interrupting the call in progress.

The SoftMux also enables you to dial to other videoconferencing equipment, phones and mobile phones in the

same way and provides you with on-screen, real-time feedback on the progress of a call.

LAN call

To make a call via a LAN, enter an IP-address by using a * as the ‘dot’ in the IP-address, e.g. 123*3*0*12 will be

interpreted as 123.3.0.12. If a gatekeeper is present, you may place IP-calls using “telephone-style” numbers (an

E.164 alias), according to the numbering plan implemented in the gatekeeper. The dialed number will then be

translated into an IP-address by the gatekeeper.

connect

TANDBERG Videoconferencing SystemGetting started

TIP

Access Code

If the system requires an Access Code, enter the code and press OK to proceed making a call:

Using sub-address / extension address / MCU password

To specify an ISDN sub-address or its LAN equivalent extension address (TCS-4), add a star (*) after the number

and then enter the sub-address/extension address.

Example: 12345678*10 ( <number>*<Sub-address/extension address/MCU password>)

When calling to external MCU’s requiring a password (TSC-1), this password can be added after the star (*). If no

password is specified, a menu will prompt you to enter the password (after connected to the MCU).

SUB-ADDRESS IS USED TO ADDRESS DIFFERENT SYSTEMS ON THE SAME ISDN LINE.

TCS-4 IS USED TO ADDRESS DIFFERENT SYSTEMS ON ALAN, WHEN DIALING IN VIA AGATEWAY.

Otros manuales para 880

Tabla de contenidos

Otros manuales de Sistema de conferencias de TANDBERG

TANDBERG

TANDBERG Codec C60 Manual de servicio

TANDBERG

TANDBERG Edge D13922.06 Instrucciones de montaje

TANDBERG

TANDBERG Codec C20 Manual de servicio

TANDBERG

TANDBERG 880 Manual de usuario

TANDBERG

TANDBERG 6000 MXP Profile Manual de usuario

TANDBERG

TANDBERG Codec C20 Manual de usuario

TANDBERG

TANDBERG DIRECTOR D5016402 Manual de usuario

TANDBERG

TANDBERG 3000 MXP Profile Manual de usuario

TANDBERG

TANDBERG Profile 42" Manual de servicio

TANDBERG

TANDBERG Maestro MXP Manual de usuario

TANDBERG

TANDBERG T150 MXP Manual de usuario

TANDBERG

TANDBERG Codec C60 Manual de usuario

TANDBERG

TANDBERG Codec C90 D14129.02 Manual de servicio

TANDBERG

TANDBERG MXP F8 - Manual de servicio

TANDBERG

TANDBERG MXP Manual de usuario

TANDBERG

TANDBERG 550 MXP Manual de usuario

TANDBERG

TANDBERG 1000 MXP Manual de usuario

TANDBERG

TANDBERG Quick Set C20 Plus Manual de servicio

TANDBERG

TANDBERG 2000 MXP Manual de usuario

TANDBERG

TANDBERG 150 MXP Manual de usuario

TANDBERG

TANDBERG 1000 Manual de usuario

TANDBERG

TANDBERG 7000 MXP Manual de usuario

TANDBERG

TANDBERG 1700 MXP Manual de usuario

TANDBERG

TANDBERG MPS 800 Manual de usuario

Manuales populares de Sistema de conferencias de otras marcas

Kramer

Kramer VIA GO Manual de usuario

AVT

AVT MAGIC AC1 Go Manual de usuario

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Manual de usuario

Sony

Sony PCS-I150 Manual de usuario

Middle Atlantic Products

Middle Atlantic Products VTC Series Manual de usuario

Prentke Romich Company

Prentke Romich Company Vanguard Plus Guía

Speakerbus

Speakerbus iD 712 Manual de usuario

Trelleborg

Trelleborg SafePilot CAT PRO Manual de usuario

Sennheiser

Sennheiser ADN Manual de usuario

ADTRAN

ADTRAN NetVanta 7100 Manual de usuario

AINA

AINA PTT Voice Responder Manual de usuario

Yamaha

Yamaha ProjectPhone PJP-100H Manual de usuario

vissonic

vissonic VLI Series Manual de usuario

Panasonic

Panasonic KX-VC500 Manual de usuario

Poly

Poly Trio 8300 Manual de usuario

Crestron

Crestron Mercury CCS-UCA-SMK Dibujo dimensional

Inmarsat

Inmarsat mini M Manual de usuario

Tenveo

Tenveo ALL-IN-ONE Manual de usuario