TANDBERG 3000 Manual de usuario

TANDBERG 880/990/3000 NET MXP

Addendum to User Manual

Your TANDBERG 880/990/3000 NET MXP is a version that is equipped with RS449/V.35/X.21

network interface instead of ISDN-BRI.

TANDBERG 880/990 NET

TANDBERG 3000 NET

The references to ISDN in the User Manual do not apply to this NET version.

All references to ISDN-BRI Settings is to be replaced with reference to the External

Network Settings section below.

 The reference to ISDN-BRI Settings in Network configuration - ISDN Configuration in

System Configuration is replaced with reference to the External Network Settings section

below.

 The Network selections in the Call Settings menu only apply to IP calls. Use ISDN in the

Network menu to select RS449/V.35/X.21.

 MultiSite entries in the Phone Book can only consist of IP sites.

880/990/3000 NET MXP

Make a Call

To make a call, choose Make a Call from the main menu. Pressing the green button on the

remote has the same effect as pressing the green button in the menu. You can enter the IP-

address number manually in the input field or select the book icon to select a contact from the

phone book.

RS449/V.35/X.21 call

Enter any number and press the green button to call directly if Call Control is set to Leased Line

or Manual (see External Network Settings section below).

If RS366 Dialing or RS366 Adtran ISU 512 is selected, you will be able to specify a number

before pressing the green Connect button.

T880/990/3000NET Addendum

Control Panel - Administrator Settings - Network - ISDN - ISDN-BRI Settings is replaced by:

External Network Settings

Before using the system together with external network equipment, you must specify the network

parameters on this page. The system has support for up to 768kbps* using the External Network

(RS449/V.35/X.21) interface. Note that the physical interface on External Networks is one non-

standard 26 pin connector.

Call Control

RS366

Dialing RS366 Dialing would normally be used together with network clocking

RS449/V.35 Compatible when the external equipment uses RS366 ports.

RS366

Adtran

ISU 512

RS366 Adtran ISU 512 offers extra usability when dialing RS366 via an

ADTRAN ISU 512 IMUX. This dialing scheme will map the call type and

bandwidth selection to ADTRAN ISU 512 specific suffixes to the dialed number.

Should only be used when connected to an ADTRAN ISU 512.

The Adtran ISU512 uses the following suffixes <Number>#C#R

#C = Call Type

#2 = audio

#3 = 56kbps

#4 = 64kbps

#R = Channel Rate

#0 = 2xh221 (2x56\64kbps)

#1 to 8 = the Call Rate.

Leased

Line Leased Line is a non-dialing protocol and should be used when two codecs are

connected in a point-to-point connection. Use Leased Line when the

handshaking signals DTR and CD are available. DTR and CD correspond to

the X.21 network’s C and I signals.

Manual Manual should be used when no handshake signals are available and the

external equipment requires a constantly connected line.

Network clocking

The network clock setting specifies the number of physical external clock signals.

RS449/V35

Compatible

Use RS449/V35 Compatible when the external equipment provides

two clock signals, one for transmit and one for receive. The difference

between RS449 and V35 is only the cable.

X21

Compatible

Use X21 Compatible when the external equipment provides a

common clock signal for both transmit and receive.

* the TANDBERG 880 NET MXP supports 384kbps.

D13719.01

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de conferencias de TANDBERG

TANDBERG

TANDBERG Quick Set C20 Plus Manual de servicio

TANDBERG

TANDBERG Codec C20 Manual de servicio

TANDBERG

TANDBERG ENTRYPOINT Manual de servicio

TANDBERG

TANDBERG Vision 5000 Manual de usuario

TANDBERG

TANDBERG 1700 MXP Manual de usuario

TANDBERG

TANDBERG 8000 MXP Instrucciones de montaje

TANDBERG

TANDBERG MCU Manual de usuario

TANDBERG

TANDBERG E20 Manual de servicio

TANDBERG

TANDBERG Codec C20 Manual de usuario

TANDBERG

TANDBERG MPS 800 Manual de usuario

TANDBERG

TANDBERG H104 Manual de usuario

TANDBERG

TANDBERG Profile 42" Manual de servicio

TANDBERG

TANDBERG Telepresence T3 119076.02 Instrucciones de montaje

TANDBERG

TANDBERG 100MXP Manual de usuario

TANDBERG

TANDBERG Maestro MXP Manual de usuario

TANDBERG

TANDBERG 1000 MXP Manual de usuario

TANDBERG

TANDBERG MediaPlace MXP Guía del usuario

TANDBERG

TANDBERG 770 MXP Manual de usuario

TANDBERG

TANDBERG Edge 95 MXP Manual de usuario

TANDBERG

TANDBERG 1000 Manual de usuario

TANDBERG

TANDBERG Telepresence T3 Manual de usuario

TANDBERG

TANDBERG Codec C90 D14306.01 Manual de usuario

TANDBERG

TANDBERG 3000 MXP Profile Manual de usuario

TANDBERG

TANDBERG 1500 MXP Manual de usuario

Manuales populares de Sistema de conferencias de otras marcas

Kramer

Kramer VIA GO Manual de usuario

AVT

AVT MAGIC AC1 Go Manual de usuario

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Manual de usuario

Sony

Sony PCS-I150 Manual de usuario

Middle Atlantic Products

Middle Atlantic Products VTC Series Manual de usuario

Prentke Romich Company

Prentke Romich Company Vanguard Plus Guía

Speakerbus

Speakerbus iD 712 Manual de usuario

Trelleborg

Trelleborg SafePilot CAT PRO Manual de usuario

Sennheiser

Sennheiser ADN Manual de usuario

ADTRAN

ADTRAN NetVanta 7100 Manual de usuario

AINA

AINA PTT Voice Responder Manual de usuario

Yamaha

Yamaha ProjectPhone PJP-100H Manual de usuario

vissonic

vissonic VLI Series Manual de usuario

Panasonic

Panasonic KX-VC500 Manual de usuario

Poly

Poly Trio 8300 Manual de usuario

Crestron

Crestron Mercury CCS-UCA-SMK Dibujo dimensional

Inmarsat

Inmarsat mini M Manual de usuario

Tenveo

Tenveo ALL-IN-ONE Manual de usuario