Synology VS240HD Manual de usuario
VS240HD Quick Installation Guide
VS240HD20120904
Table of Contents
TOC
2
Getting Started 3
Package Contents 4
Hardware Specications 4
Software Specications 5
Other Requirements 5
At a Glance 6
LED Behavior 7
Safety Instructions 7
Installation 9
Hardware Setup 9
Check Surveillance Station Software 11
Pair VS240HD with Synology Server 12
Learn More 14
CHAPTER
1
3
Thank you for purchasing this Synology product. VS240HD is a live view and
playback solution designed to supplement and enhance your Surveillance Station
conguration.
VS240HD can be connected to HDMI displays, allowing you to easily monitor,
control, and record events using the IP cameras linked to your Surveillance
Station.
This Quick Installation Guide will help you complete hardware installation and pair
VS240HD with your Synology server.
HDMI
USB
LAN
Network
Computer
Synology Server VS240HD HDMI Display
Mouse
IP Cameras
Getting Started
4 Chapter 1: Getting Started
Package Contents
First, check the package contents to verify that you have received all the items
below.
Main Unit AC Power Adapter
RJ-45 LAN Cable
Quick Installation
Guide
Hardware Specications
USB 2.0 Ports 4
HDMI Video Output 2
Audio Output 3.5 mm Stereo Audio Jack
Size 166 x 71 x 224 mm
Weight 0.87 kg
Gigabit LAN Ports 1
AC Input Power Voltage 100V to 240V AC
Power Frequency 50 / 60 Hz
Operating Temperature 0°C ~ 45°C (32°F ~ 110°F)
Storage Temperature -10°C ~ 70°C (15°F ~ 155°F)
Relative Humidity 5% to 95% RH
Maximum Operating Altitude 6,500 feet (2000 m)
Certication FCC Class B, CE Class B
Chapter 1: Getting Started 5
Software Specications
Maximum Channel # 24 (240FPS @ 720p)
Live View Yes
Playback Yes
Compression Formats MJPEG, MPEG-4, H.264
Maximum Video Resolution 1080p
Snapshot Yes (save to USB disk)
PTZ Yes (for PTZ cameras only)
Firmware Upgrade Yes (via USB drive)
Other Requirements
Surveillance Station 6 and onwards
Supported IP Cameras For a complete list of supported IP cameras,
please visit http://www.synology.com
Note: Model specications are subject to change. Please refer to www.synology.com for the latest information.
6 Chapter 1: Getting Started
6
1
2
3
4
5
7
9
8
Article Name Location Description
1 LED Indicators Front
Shows system status, network connection, and lock
status. For more details, please refer to the "LED
Behavior" table below.
2 Power Button Front Press to turn VS240HD on or off.
3 Audio Output Rear Connect external speakers or earphones here (only for
cameras with audio support).
4 HDMI Output Rear Connect HDMI cables here.
5 USB 2.0 Rear Connect USB mouse or other devices here.
6 LAN Port Rear Connect LAN cable here.
7 Power Port Rear Connect AC power adapter here.
8Kensington
Lock Rear Kensington locks can be secured here.
9 Reset button Rear Press and hold the RESET button to restore settings to
the factory default.
At a Glance
Chapter 1: Getting Started 7
LED Behavior
LED Behavior Description
POWER
Static Blue System ready
Blinking Blue Booting or shutting down
Off Power off
STATUS Static Green Server connected
Off Server not connected
LAN
Static Green Network connected
Blinking Green Network active
Off Network down
LOCK
Static Green Locked with paired Synology server
Blinking Green Unlocked (can be paired with Synology server)
Safety Instructions
Please read the safety instructions below to avoid harming yourself or damaging
VS240HD.
Keep away from direct sunlight and away from chemicals. Make sure
the environment does not experience abrupt changes in temperature
or humidity.
Keep product upright or positioned correctly. Do not lay it down
horizontally.
Do not place your Synology product close to any type of liquid.
Unplug the power cord before cleaning. Wipe your Synology product
with damp paper towels. Do not use chemical or aerosol cleaners.
Do not place your Synology product on any unstable surfaces.
The power cord must be plugged into a socket with the correct
voltage. Make sure your AC adapter voltage is correct.
Risk of explosion if batter is replaced with an incorrect type. Dispose
of used batteries appropriately.
8 Chapter 1: Getting Started
2
9
Installation
Hardware Setup
Read this section and follow the instructions below to complete hardware setup
for VS240HD.
1 Connect one end of the AC power adapter to VS240HD and the other end into
a power outlet.
2 Connect one end of the LAN cable to VS240HD and the other end to your
switch/router/hub.
10 Chapter 2: Installation
3 Connect one end of your HDMI cable to VS240HD and the other end to your
HDMI display.
4 Connect your USB mouse to the USB port located on the back of VS240HD.
5 Push the Power button on the front panel. After booting up, VS240HD will be
online and ready to pair with your Synology server.
Tabla de contenidos
Otros manuales de Sistema de seguridad de Synology
Manuales populares de Sistema de seguridad de otras marcas
EDM
EDM Solution 6+6 Wireless-AE Manual de usuario
Highway Safety Group
Highway Safety Group EA401 Manual de usuario
Siren
Siren LED GSM Manual de usuario
Detection Systems
Detection Systems 7090i Instrucciones de montaje
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manual de usuario
Siemens
Siemens FDM273 Manual de usuario