SWIT S-1273F Manual de usuario
1
Model: S-1273F
27" Broadcast Studio LCD Monitor
User Manual
Ver: C
SWIT Electronics Co., Ltd.
Please read this User Manual
throughout before using.
2
Preface
1. All internal technologies of this product are protected, including device, software and trademark.
Reproduction in whole or in part without written permission is prohibited.
2. All brands and trademarks of SWIT Electronics Co., Ltd. are protected and other relative
trademarks in this user manual are the property of their respective owners.
3. Due to constant effort of product development, SWIT reserves the right to make changes and
improvements to the product described in this manual without prior notice.
4. The warranty period of this product is 2 years, and does not cover the following:
Physical damage to the surface of the products, including scratches, cracks or other⑴damage to
the LCD screen or other externally exposed parts;
The LCD dot defects are not over three;⑵
Any damage caused by using third⑶-party power adaptors;
Any damage or breakdown caused by use, maintenance or storage not according to the user⑷
manual;
The product is disassembled by anyone other than an authorized service center;⑸
Any damage or breakdown not caused by the product design, workmanship, or manufacturing⑹
quality, etc;
＊Any sales personnel have no rights to provide additional warranty.
5. For any suggestions and requirements on this product, please contact us through phone, fax,
Email, etc.
SWIT Electronics Co., Ltd.
Address: 10 Hengtong Road, Nanjing Economic and Technological Development Zone,
Nanjing 210038, P.R. China
Phone: +86-25-85805753
Fax: +86-25-85805296
Website: http://www.swit.cc
3
Maintenance
Warning
1. In order to reduce the risk of fire and electrical shock, do not lay this product in rain or damp
places.
2. Please keep away from the strong magnetic field; it may cause the noise of the video and audio
signals.
The power
1. Please use the power adapter provided or recommended by the manufacturer in order to avoid
damage.
2. For a third party power adapter, please make sure the voltage range, supplied power, and
polarity of power lead are fit.
3. Please disconnect the power cable under the following situations:
(A). If you do not operate this monitor for a period of time;
(B). If the power cable or power adaptor is damaged;
(C). If the monitor housing is broken.
The monitor
1. Please don't touch the screen with your fingers, which would probably deface the screen.
2. Please don't press the screen; the LCD is extremely exquisite and flimsy.
3. Please don't lay this product on unstable place.
Cleaning
1. Please clean the screen with dry and downy cloth or special LCD cleanser.
2. Please do not press hard when cleaning the screen.
3. Please do not use water or other chemical cleanser to clean the screen. The chemical may
damage the LCD.
4
Contents
Preface .................................................................................................................................................2
Maintenace ...........................................................................................................................................3
Contents ...............................................................................................................................................4
Packing List ..........................................................................................................................................4
Introduction ...........................................................................................................................................4
Installation Dimensions.........................................................................................................................5
Operation Instructions...........................................................................................................................8
Front Panel........................................................................................................................................8
OSD ..................................................................................................................................................9
Rear Panel ...................................................................................................................................... 11
Main Menu..........................................................................................................................................12
Specification........................................................................................................................................20
Trouble-Shooting ................................................................................................................................21
Packing List
S-1273Foffers the standard package.
No. Parts name Standard
package
Remarks
1 Monitor X1
2 User manual X1
3 Warranty card X1
4 Battery plate (V-mount or Gold mount option) X1
5 Desktop Stand Feet X1
6 Power adaptor + power cable X1
Introduction
S-1273F adopts IPS LCD panel, with resolution 1920×1080 and wide viewing angle H178°⁄V178°.
It supports 2 x 3GSDI (Level A/B), 1 x HDMI, 1 x CVBS, 1 x Y/Pb/Pr, 1 x VGA and 1 x analog audio
input. It also supports 2 x 3GSDI, 1 x HDMI, 1 x CVBS and 1 x analog audio loop through output.
Features:
Support multiple Aspect Ratio and scan modes
Support multiple Marker selection (Marker, Safety Area)
Powerful audio and video analysis functions
Support multiple functions user-defined (Source ID, function keys, GPI)
Multiple power supply methods to meet different requirements
TSL UMD (RS485&RS232) ,Tally, GPI Control
USB firmware upgrade
Support 2K display
Support green energy saving mode
Support 3DLut calibration and Camera Log conversion
5
Installation Dimension
The main body (in mm)
With desktop stand feet (in mm)
For optional purchase
Item Name Item Model
V-mount battery plate S-7000S
Gold-mount battery plate S-7000A
1. Battery plate
Installation
1. Take off the rub cover on the rear panel; see Fig (1).
2. Insert the DC cable of S-7000S/A into the hole, and
plug onto the power socket inside the hole; see Fig (2).
3. Fix the battery plate onto the rear panel by the supplied
screws;seeFig(3).
S-7000S S-7000A
Fig(1) Fig(2) Fig(3)
6
Operation Instructions
·Front Panel
(1) Desktop Stand Feet
(2) Speaker: For SDI/HDMI embedded audio and analog audio monitoring. (Will not work if earphone
is plugged in)
(3) Illuminated Push Button
SDI1: Press “SDI1” to switch to SDI input 1
SDI2: Press “SDI2” to switch to SDI input 2
HDMI: Press “HDMI” to switch to HDMI input
ANALOG: Press “ANALOG” to select from CVBS, VGA, Y/ Pb / Pr signal
F1～F4: User definable function keys; please see details in “4.Function Key” under “Main Menu”.
WFM: Waveform shortcut key, press “WFM” to quickly turn on or turn off the waveform, and select
the type of the waveform.
DISPLAY: Press “DISPLAY” to turn on or turn off relevant status information, audio and video
waveform.
Press “DISPLAY” to release one key quit the menu when Menu is opened.
(4) Rotary Knob
MENU/ENTER: When the menu is inactivated, press “MENU/ENTE” to turn on the main menu
Revolve “MENU/ENTER” to adjust settings or parameters, and press to apply
When the menu is inactivated, revolve “MENU/ENTER” to adjust the sound volume
BRIGHT: 0-100 value adjustment and the default value is 50
CONTRAST: 0-100 value adjustment and the default value is 50
SATURATIO: 0-100 value adjustment and the default value is 50
POWER: Power on/off⑸
PHONE: 3.5mm earphone socket, for SDI/HDMI embedded audio and analog audio monitoring.⑹
⑺TALLY Light: Red, Green and Yellow 3-color TALLY indicator
7
·OSD
Timecode⑴（SDI）
Under SDI input, it can display Timecode. If no Timecode information is detected, it will be
displayed as “TC UNLOCKED”.
User can set function keys F1～F4 or GPI pins as “Timecode” to turn on or off this function.
UMD⑵
Set up the UMD under “UMD” submenu.
⑶AFD (SDI)
User can set function keys F1～F4 or GPI pins as “AFD” to turn on or off this function. If no
relevant information is detected, it will be displayed as “AFD: UNLOCKED”.
Audio⑷Bar
Monitor the audio information. The relevant parameters like position, audio channels and blending,
etc. can be changed under “Audio Bar” submenu.
User can set function Keys F1～F4 or GPI pins as “Audio Bar” to turn on or off this function.
Histogram⑸
User can set function Keys F1～F4 or GPI pins as “Histogram” to turn on or off this function.
Vector⑹
The relevant parameters like Vector position, Vector color and Vector blending, etc. can be
changed under “Vector” submenu.
User can set function Keys F1～F4 or GPI pins as “Vector” to turn on or off this function.
Waveform⑺
Press “WFM” on the front panel to turn on/of this function. The relevant parameters like WFM
position, WFM color and WFM blending, etc. can be changed under “Waveform” submenu.
8
Introduction of audio and video functions
16-ch embedded audio meters
Under 3G/HD/SD SDI, it displays 16 channels embedded audio meters. Under HDMI, it displays 8
channels embedded audio meters. The audio meter is green, and will turn yellow when audio
exceeds -20dB, and turn red when audio exceeds -9dB.
Audio alarm
If the embedded audio value is too low or no embedded audio, it will display “MUTE” or
“UNLOCKED” in the audio bar.
Timecode（SDI）
Under SDI input, it can display the SMPTE time code (VITC1, VITC2 or LTC) on the top of the
screen, which is used extensively for synchronization, and for logging and identifying material in
recorded media. If no Timecode information is detected, it will be displayed as “TC UNLOCKED”.
Waveform (Y, Cb, Cr, R, G, B)
Under SDI and HDMI input, totally 6 kinds of waveforms which are Y, CB, CR, R, G and B can be
selected so as to check the brightness and chroma distribution.
Vector
The displayed vector scope pattern is available under both SDI and HDMI, represents saturation
as distance from the center of the circle, and hue as the angle, in standard position, around it.
Histogram (R, G, B)
The histogram is a bar graph that shows the distribution of luminance values in the picture.
There’re R, G, B histograms that individually displayed simultaneously, available under both SDI
and HDMI.
Internal Color Bar
Under SDI and HDMI input, it has 100% internal color bar which helps analyze the monitor color
and adjust the display parameter.
User can set function Keys F1～F4 or GPI pins as “color bar” to turn on or off this function.
Peaking focus assist (red/blue switch)
The Peaking focus assist function is to mark the sharpest edges of the image with red or blue
color under SDI and HDMI input, for users to check if the subjects are focused.
User can set function Keys F1～F4 or GPI pins as “Focus Assist” to turn on or off this function.
Zebra stripes
Zebra Stripes are used to check if the image is over exposed or not by showing black and white
lines on the monitor. It is considered over exposed when luminance value exceeds 90%.
User can set function Keys F1～F4 or GPI pins as “Zebra” to turn on or off this function.
Freeze Frame
9
The freeze frame is to capture and display the current broadcast frame.
User can set function Keys F1～F4 or GPI pins as “Freeze Frame” to turn on or off this function.
R/G/B/Mono
R/G/B/Mono is to display only the blue/red/green primary signal or the luminance signal only so as
to monitor the image noise.
User can set function Keys F1～F4 or GPI pins as “R/G/B/Mono” to turn on or off this function.
False Color
The false color is used to aid in the setting of camera exposure. Under false color mode, there’s a
color chart on the bottom of screen for reference. The color from the dark to the bright will be
displayed as blue, cyan, green, yellow, orange and red in a consecutive way. User can set
function Keys F1～F4 or GPI pins as “False color” to turn on or off this function.
AFD（SDI）
It is the abbreviation of active format description. AFD is to display the SDI embedded AFD
information graphically on the screen.
H/V Delay（SDI）
Under SDI input, H/V Delay can be used to display line/field blanking signal, and to observe the
horizontal and vertical synchronous signal.
UMD
When using external control unit, it can display the video source ID and tally information on the
screen.
Image Flip
Horizontal, vertical, horizontal and vertical two-way image flip function.
10
·Rear Panel
⑴Handle
⑵DC IN 11V-17V BACK UP: Back up power input, connect with DC11V～17V 4-pin XLR power
adapter. (Pin 1: Negative, Pin 4: Positive)
⑶DC IN 11V-17V MAIN: Main power input, connect with DC11V～17V 4-pin XLR power adapter. (Pin
1: Negative, Pin 4: Positive)
⑷Reserved battery plate power socket: Take off the rub cover; connect V-mount or Gold mount
battery plate to the power socket.
⑸Power adaptor
⑹VESA Mount: Standard 10×10cm VESA desktop stand installation
⑺1U plastic bump: Protect the BNC sockets on the rear panel
⑻Socket1
RS-485 (IN, OUT): TSL UMD control port
GPI: GPI control port
Y/Pb/Pr: Y/Pb/Pr input
CVBS-IN: CVBS input (BNC connector)
CVBS-OUT: VBS output (BNC connector)
⑼Socket 2
RS-232C: TSL UMD control port
VGA-IN: VGA input
HDMI (IN, OUT): HDMI input/output (HDMI-A connector)
SDI-IN1: SDI input (BNC connector)
SDI-OUT1: SDI loop through output from SDI-IN1 (BNC connector)
SDI-IN2: SDI input (BNC connector)
SDI-OUT2: SDI loop through output from SDI-IN2 (BNC connector)
AUDIO-L: Left channel audio signal input (3.5mm RCA)
AUDIO-R: Right channel audio signal input (3.5mm RCA)
⑽USB socket
Tabla de contenidos
Otros manuales de Monitor de SWIT
SWIT
SWIT S-1073H Manual de usuario
SWIT
SWIT S-1071H(EFP) Manual de usuario
SWIT
SWIT S-1051C Manual de usuario
SWIT
SWIT S-1092H Manual de usuario
SWIT
SWIT M-1093H Manual de usuario
SWIT
SWIT S-1051H Manual de usuario
SWIT
SWIT S-1071H Manual de usuario
SWIT
SWIT S-1221H Manual de usuario
SWIT
SWIT S-1173H Manual de usuario
SWIT
SWIT S-1173F Manual de usuario
SWIT
SWIT BM-U Series Manual de usuario
SWIT
SWIT ProHD DT-X71H Manual de usuario
SWIT
SWIT S-1073F Manual de usuario
SWIT
SWIT s-1222F Manual de usuario
SWIT
SWIT S-1071C Manual de usuario
SWIT
SWIT S-1071H+ Manual de usuario
SWIT
SWIT S-1223H Manual de usuario
SWIT
SWIT CM-S73H Manual de usuario
SWIT
SWIT S-1093F Manual de usuario
SWIT
SWIT S-1243F Manual de usuario
