Swann OutbackCam Manual de usuario

1
EN
INSTRUCTION MANUAL
OutbackCam

2
Please take a moment to familiarize yourself with your
new Swann OutbackCam.
Lens
Status
light
Passive
infrared
motion
sensor
Front
21 Infrared
LEDs
19 Infrared
LEDs
Locking screw
securing bottom cover
Light sensor
for night
detection
Overview

3
SD Card slot
Menu button
ON/OFF switch
Video/Photo Mode switch IR LED Mode switch (19 or 40)
Battery Pack
port
OK button
Peel off the clear film protecting the LCD screen before use.
GPRS Data
switch
(Feature is not
available on
this model)
USB port
TV Out port
LCD screen
Up/Down/
Left/Right
buttons
12V DC-in power jack
(optional)
Bottom
Back
Battery compartment

4
Battery Pack
Mounting Strap USB Cable
Battery cover latch
Connector socket
Locking latch

5
Let's learn how to install batteries and storage media in your
OutbackCam.
First, release the bottom cover of the OutbackCam by
twisting the locking screw anti-clockwise, and then follow the
instructions below.
Always switch off the OutbackCam before inserting or removing
batteries or memory cards.
Install batteries
For optimal battery life in cold weather climates, we recommend
using lithium batteries. Do not use rechargeable batteries.
1. Push the battery compartment cover to open it.
2. Insert 2 fresh "AA" alkaline or lithium batteries into each
battery slot. Follow the polarity (+ and -) markings shown on
the metal backing under the battery compartment cover.
3. Close the battery compartment cover by firmly pushing it
down until it clicks shut.
Batteries and Storage Media
Install storage media
The OutbackCam has no internal memory; instead photos and
videos are stored on a SD memory card (up to 32GB supported).
To ensure smooth performance and plenty of space for recording
important moments, we recommend using a fast memory card
(class 4 or higher), with at least 8 GB of capacity, from a well-
known manufacturer.
• Insert an SD memory card into the SD card slot, with the
gold-coloured contacts facing up towards the front of the
OutbackCam until it clicks into place.
The SD card only fits into the slot one way. Do not force it in.

6
Enclosed in an integrated cradle, the Battery Pack provides
your OutbackCam the extra juice to help it stay powered for
even longer - great for long-term observations in the field.
Install batteries
1. Release the latch on the sides of the Battery Pack, and then
gently separate the battery pack from the OutbackCam.
2. Open the battery cover, and then insert four fresh "AA"
alkaline or lithium batteries into the battery compartment
by following the polarity (+ and -) markings shown inside.
3. Close the battery compartment cover.
4. Reattach the Battery Pack to the OutbackCam via the
connector socket, and then engage and lock side latches to
secure them together.
The included mounting strap allows you to the strap the
OutbackCam to a tree or timber post.
• Simply thread the strap through the slots on the back of
the Battery Pack cradle, then around a suitable object
like a tree, and through the strap buckle. Pull the strap to
tighten.
Battery Pack
Mounting Strap
Threading the strap through the buckle correctly

7
Let's learn how to use your OutbackCam.
Turning on the OutbackCam for the first time
• Set the ON/OFF switch to ON. The status light blinks five
times to indicate the OutbackCam is ready to monitor and
capture motion triggered events.
• The LCD screen only turns on when the OutbackCam is in
preview mode. Press the OK button to go into preview mode.
The status light illuminates to indicate the OutbackCam is in
preview mode.
Preview mode
• When you first enter preview mode, the screen momentarily
displays information about the capacity and amount of
available storage on your SD card.
• You can access the menu to configure OutbackCam
settings, browse and review captured photos and videos via
the playback screen, and take quick snapshots or videos
manually.
• To exit preview mode and start monitoring immediately,
press the OK button for 5 seconds.
• The OutbackCam automatically exits preview mode if there
is no button press for 60 seconds (except when the menu is
displayed).
• If a recording is in progress, you have to wait until the
OutbackCam has stopped recording before you can enter
preview mode.
Basics

8
Video/Photo mode
• Set the Video/Photo switch to the desired mode for
capturing motion events.
• You can configure settings such as the quality and amount of
video recorded, and the size and number of photos taken for
a motion event, via the menu.
• The OutbackCam can also capture pictures while it is
recording a video, and vice-versa. To do this, turn on the
Camera + Video setting in the menu.
• In preview mode, you can manually take a snapshot or
record what's on the camera screen. Press the OK button
to take a quick snapshot or to begin recording. To stop
recording, just press the OK button again.
Playback screen
• In preview mode, you can view photos, play videos and
delete files on the SD card by pressing the Up button to
display the Playback screen.
• Review your collection of captured photos and videos by
pressing the Left or Right button.
• Playback a selected video by pressing the OK button. To
stop playback, press the Menu button.
• Delete a single file, or the entire collection of photos and
videos by pressing the Menu button, and then selecting
Delete. You can also format the SD card by selecting
Format.
• Note that deleted files cannot be recovered. Be sure to
transfer valuable photos and videos to a computer before
proceeding.
• To exit the Playback screen, press the Up button.

9
Menu screen
• In preview mode, press the Menu button to display the
camera menu.
• Use the Up/Down/Left/Right buttons to navigate the menu
or change settings, and the OK button to select a menu
option or confirm a setting.
• To exit the menu, press the Menu button.
• For more information on available OutbackCam settings,
see Menu.
Connect to a computer
• Using the included USB cable, you can copy videos and
photos on your SD memory card in the OutbackCam to
your computer.
• To connect, make sure the OutbackCam is switched off,
then plug one end of the USB cable into the USB port on
the OutbackCam and the other end into an available USB
port on your computer.
Connect to a television
• Using the included AV cable, you can connect the
OutbackCam to your television to watch video recordings
and show off photos directly on a large screen.
• To connect, plug the yellow and red connectors on the AV
cable into the corresponding video and audio inputs on
your television and the black AV connector end into the TV
Out port on the OutbackCam.
• The Outback screen turns off when connected to the
television.
• Be sure to switch the correct Video input source on your
television to display the OutbackCam.

10
Option To do this...
Camera ID Assign a 4-digit numerical ID for the
OutbackCam, which will appear on your
photos. This setting is useful if you own more
than one OutbackCam and placed them in
different locations.
Camera +
Video
Select whether also to capture photos or
videos when the camera is in Video or Photo
mode. (i.e., combination mode)
Multi-Shot Select how many consecutive shots
(commonly known as continuous or burst
shooting) to take when an event occurs.
Image Size Select the photo resolution in megapixels. If
you print large photos and want to maintain
fine detail, set this option to the highest
megapixel.
Video Size Select the video quality of your recordings.
Higher resolution settings produce better
quality videos but will consume more memory
storage.
Video Frame Adjust the video frame rate of recordings.
The higher the frame rate, the smoother the
motion in the video, but will consume more
memory storage.
Let's explore the camera settings available in the menu so you
can get the most out of your OutbackCam.
Menu
Otros manuales para OutbackCam
1
Tabla de contenidos
Otros manuales de Cámara de exploración de Swann


















