Supermicro AOC-STGS-i1T Manual de usuario
USER’S GUIDE
Revision 1.1
AOC-STGS-i2T
AOC-STGS-i1T
The information in this User’s Guide has been carefully reviewed and is believed to be accurate. The vendor assumes
no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update
or to keep current the information in this User's Guide, or to notify any person or organization of the updates. Please
Note: For the most up-to-date version of this user's guide, please see our website at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this
User's Guide at any time and without notice. This product, including software and documentation, is the property of
Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction of this product is not
allowed, except as expressly permitted by the terms of said license.
IN NO EVENT WILL Super Micro Computer, Inc. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT
OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER
MICRO COMPUTER, INC. SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED
OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the
State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution
of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual,
may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only
to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate”.
The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment,
nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical
systems whose failure to perform be reasonably expected to result in signicant injury or loss of life or catastrophic
property damage. Accordingly, Supermicro disclaims any and all liability, and should buyer use or sell such products
for use in such ultra-hazardous applications, it does so entirely at its own risk. Furthermore, buyer agrees to fully
indemnify, defend and hold Supermicro harmless for and against any and all claims, demands, actions, litigation, and
proceedings of any kind arising out of or related to such ultra-hazardous use or sale.
User's Guide Revision 1.1
Release Date: July 2, 2018
Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this
document. Information in this document is subject to change without notice. Other products and companies referred
to herein are trademarks or registered trademarks of their respective companies or mark holders.
Copyright © 2018 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
WARNING: This product can expose you to chemicals including
lead, known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information, go
to www.P65Warnings.ca.gov.
!
3
Preface
Preface
About This User's Guide
This user's guide is written for system integrators, IT technicians and
knowledgeable end users. It provides information for the installation and use of the AOC-
STGS-i1T/i2T add-on card.
About This Add-On Card
The Supermicro® AOC-STGS-i1T/i2T is the most feature-rich, low power 10Gbase-T controller
in the market today. Based on the Intel® X550 AT/AT2* chipset with features such as VXLAN
and NVGRE, this add-on card offers exible connectivity for all networking requirements. The
second generation integrated 10GbE MAC+PHY drives down both cost and power, enabling
a highly cost effective deployment of 10GbE in the data center. With Supermicro Asset
management and thermal detection to provide an extra layer of security and a peace of mind,
the AOC-STGS-i1T/i2T is among the most innovative 10GbE controllers in the market It is an
excellent choice to expand network connectivity in data centers and enterprise environments.
*The X550 AT is for the AOC-STGS-i1T, and the X550 AT2 is for AOC-STGS-i2T.
Conventions Used in the Manual
Special attention should be given to the following symbols for proper installation and to prevent
damage done to the components or injury to yourself:
Warning! Indicates high voltage may be encountered when performing a procedure.
Warning! Indicates important information given to prevent equipment/property damage
or personal injury.
Important: Important information given to ensure proper system installation or to
relay safety precautions.
Note: Additional Information given to differentiate various models or provides infor-
mation for correct system setup.
4
Naming Convention
SMC Networking Add-on Cards
Naming Convention for SIOM Network Adapters
A O C – S T G S – i 1 T
1 – 2 3 4 –5 6 8
Character Representation Options
1st Product Family AOC: Add On Card
2nd Form Factor S: Standard, P: Proprietary, C: MicroLP,
M: Super IO Module (SIOM), MH: SIOM Hybrid
3rd Product Type/Speed G: GbE (1Gb/s), TG: 10GbE (10Gb/s), 25G: 25GbE (25Gb/s),
40G: 40GbE (40Gb/s), 50G: 50GbE (50Gb/s), 100G: 100GbE
(100Gb/s), IBE: EDR IB (100Gb/s), IBF: FDR IB (56Gb/s),
IBQ: QDR IB (40Gb/s), HFI: Host Fabric Interface
4th Chipset Model (Optional) N: Niantec (82599), P: Powerville (i350), S: Sageville (X550)
5th Chipset Manufacturer (Optional) i: Intel, m: Mellanox, b: Broadcom
6th Number of Ports 1: 1 port, 2: 2 ports, 4: 4 ports
7th Connector Type (Optional) S: SFP+/SFP28, T: 10GBase-T, Q: QSFP+, C: QSFP28
8th 2nd Controller/Connector Type
(Optional)
G: GbE RJ45, S: 10G SFP+, T: 10GBase-T
Model Type Form Factor Controller Connection Dimension
(w/o Brackets) (L x H)
Power
(W)
SGP-i2 GbE Standard LP Intel® i350 AM2 2 RJ45 (1Gb/port) 3.9” (99mm) x 2.73” (69mm) 3.5
SGP-i4 GbE Standard LP Intel® i350 AM4 4 RJ45 (1Gb/port) 3.9” (99mm) x 2.73” (69mm) 5
STG-b4S 10GbE Standard LP Broadcom® BCM57840S 4 SFP+ (10Gb/port) 5.4” (137mm) x 2.73” (69mm) 14
STG-i2T 10GbE Standard LP Intel® X540-AT2 2 RJ45 (10GBase-T) 5.9” (150mm) x 2.73” (69mm) 13
STGN-i2S 10GbE Standard LP Intel® 82599ES 2 SFP+ (10Gb/port) 4.0” (102mm) x 2.73” (69mm) 11.2
STGN-i1S 10GbE Standard LP Intel® 82598EN 1 SFP+ (10Gb/port) 4.0” (102mm) x 2.73” (69mm) 10
STG-i4S 10GbE Standard LP Intel® XL710-AM1 4 SFP+ (10Gb/port) 5.9” (150mm) x 2.73” (69mm) 8
S40G-i2Q 40GbE Standard LP Intel® XL710 AM2 2 QSFP+ (40Gb/port) 5.9” (150mm) x 2.73” (69mm) 7
PTG-i1S 10GbE Proprietary Intel® 82599EN 1 SFP+ (10Gb/port) 10.04” (255mm) x .78” (20mm) 7.5
UG-i4 GbE UIO FH Intel® 82571EB 4 RJ45 (1Gb/port) 6.6” (167mm) x 3.9” (98mm) 10
CGP-i2 GbE MicroLP Intel® i350 AM2 2 RJ45 (1Gb/port) 4.45” (113mm) x 1.54” (39mm) 4
CG-i2 GbE MicroLP Intel® 82580 2 RJ45 (1Gb/port) 4.45” (113mm) x 1.3” (34mm) 4
CIBF-m1 FDR IB MicroLP Mellanox® ConnectX-3 1 QSFP (56Gb/port) 4.85" (123mm) x 1.54" (39mm) 7
CIBQ-m1 QDR IB MicroLP Mellanox® ConnectX-3 1 QSFP (40Gb/port) 4.85" (123mm) x 1.54" (39mm) 7
CTG-i1S 10GbE MicroLP Intel® 82599EN 1 SFP+ (10Gb/port) 4.85" (123mm) x 1.54" (39mm) 10
CTG-i2S 10GbE MicroLP Intel® 82599ES 2 SFP+ (10Gb/port) 4.85" (123mm) x 1.54" (39mm) 11
CTG-i2T 10GbE MicroLP Intel® X540 2 RJ45 (10GBase-T) 4.8” (123mm) x 2.75” (77mm) 13
CTGS-i2T 10GbE MicroLP Intel® X550 2 RJ45 (10GBase-T) 4.45” (113mm) x 1.54” (39mm) 12
MGP-i2 GbE SIOM Intel® i350 AM2 2 RJ45 (1Gb/port) 3.622" (92mm) x 3.428" (87.1mm) 3.7
MGP-i4 GbE SIOM Intel® i350 AM4 4 RJ45 (1Gb/port) 3.622" (92mm) x 3.428" (87.1mm) 4.4
MTGN-i2S 10GbE SIOM Intel® 82599ES 2 SFP+ (10Gb/port) 3.622" (92mm) x 3.428" (87.1mm) 7.2
MTG-i4S 10GbE SIOM Intel® XL710-AM1 4 SFP+ (10Gb/port) 3.622" (92mm) x 3.428" (87.1mm) 7
Networking Adapter List
AOC-STGS-i1T/i2T User's Guide
5
Contacting Supermicro
Headquarters
Address: Super Micro Computer, Inc.
980 Rock Ave.
San Jose, CA 95131 U.S.A.
Tel: +1 (408) 503-8000
Fax: +1 (408) 503-8008
Email: [email protected] (General Information)
Website: www.supermicro.com
Europe
Address: Super Micro Computer B.V.
Het Sterrenbeeld 28, 5215 ML
's-Hertogenbosch, The Netherlands
Tel: +31 (0) 73-6400390
Fax: +31 (0) 73-6416525
Email: [email protected] (General Information)
Website: www.supermicro.nl
Asia-Pacic
Address: Super Micro Computer, Inc.
3F, No. 150, Jian 1st Rd.
Zhonghe Dist., New Taipei City 235
Taiwan (R.O.C)
Tel: +886-(2) 8226-3990
Fax: +886-(2) 8226-3992
Website: www.supermicro.com.tw
Preface
6
AOC-STGS-i1T/i2T User's Guide
Table of Contents
Naming Convention.....................................................................................................................4
SMC Networking Add-on Cards ..................................................................................................4
Chapter 1 Introduction
1.1 Overview ...............................................................................................................................8
1.2 Key Features.........................................................................................................................8
1.3 Specications ........................................................................................................................9
General................................................................................................................................9
I/O Features ........................................................................................................................9
Virtualization Features.......................................................................................................10
Remote Boot Options........................................................................................................10
Security and Power Management.....................................................................................11
Cables Support .................................................................................................................11
Operating Conditions ........................................................................................................11
Physical Dimensions .........................................................................................................11
Weight ...............................................................................................................................11
Compliance/Environmental................................................................................................11
Supported Platforms .........................................................................................................12
Operating System Support................................................................................................12
Cable Support ...................................................................................................................13
Chapter 2 Hardware Components
2.1 Add-On Card Images and Layouts ....................................................................................14
2.2 Major Components .............................................................................................................16
2.3 Connectors and LEDs.......................................................................................................17
Chapter 3 Installation
3.1 Static-Sensitive Devices.....................................................................................................20
Precautions .......................................................................................................................20
Unpacking .........................................................................................................................20
3.2 Before Installation...............................................................................................................21
3.3 Installing the Add-On Card.................................................................................................21
7
3.4 Installing Drivers on Windows............................................................................................22
3.5 Installing Drivers on Linux..................................................................................................23
Build a Binary RPM Package............................................................................................23
3.6 Installing Drivers on FreeBSD............................................................................................25
3.7 Returning Merchandise for Service....................................................................................27
Preface
8
AOC-STGS-i1T/i2T User's Guide
Chapter 1
Introduction
1.1 Overview
Congratulations on purchasing your add-on card from an acknowledged leader in the industry.
Supermicro products are designed with the utmost attention to detail to provide you with the
highest standards in quality and performance. For product support and updates, please refer
to our website at http://www.supermicro.com/products/nfo/networking.cfm#adapter.
1.2 Key Features
• Single RJ45 connector (for i1T model) or dual RJ45 connectors (for i2T model)
• Low-Prole, Short Length Standard Form Factor
• PCI Express 3.0 x4 (8GT/s)
• Asset Management features with thermal sensor
• Intel second generation, single-port 10GbE controller 550 AT (for the i1T model), or dual-
port 10GbE controller X550 AT2 (for the i2T model) with integrated MAC and PHY
• IEEE 802.3az Energy Efcient Ethernet (EEE)
• Unied networking delivering LAN, iSCSI, and FCoE over 10GBASE-T
• VXLAN and NVGRE
• VMDq, PCI-SIG SR-IOV for Virtulization Environments
• Intel Ethernet Flow Director for hardware-based application trafc steering
• Data Center Bridging (DCB) with FCoE stateless ofoad
• Jumbo Frames support up to 15.5KB
• Time Sync IEEE1588
9
Chapter 1: Introduction
• NC-SI for IPMI support
• RoHS compliant 6/6
1.3 Specications
General
• Intel X550 AT/X550 AT2* 10GbE controller with integrated MAC and PHY (Note: The X550
AT is for the AOC-STGS-i1T, and the X550 AT2 is for AOC-STGS-i2T.)
• Compact size low-prole standard form factor
• PCIe interface v3.0 - 8.0 GT/s, 5.0 GT/s, and 2.5 GT/s; support for x1 and x4, links widths
(lanes)
• Single RJ45 connector (on i1T model) or dual RJ45 connectors (on i2T model) with speed
up to 10Gb/port
• Maximum power consumption: 13.1W (for AOC-STGS-i2T), 10.1W (for AOC-STGS-i1T)
I/O Features
• Intel Flow Director
• MSI-X Support
• Multiple Queues: 128 Tx and Rx Per Port
• TCP/UDP, IPv4 Checksum Ofoads
• RSS for Windows Environment Scalable I/O for Linux Environments
• IPv6 Support for IP/TCP and IP/UDP Receive Checksum Ofoad
• Tx TCP Segmentation Ofoad
• FCoE Tx/Rx CRC Ofoad
• Large FC Receive
• FCoE Transmit Segmentation Ofoads
• FCoE Coalescing and Direct Data Placement
10
AOC-STGS-i1T/i2T User's Guide
• Support for Packets Up to 15.5KB
• DMA Coalescing
• Flow Director Filters:
• Up to 32 Kb – Two Signature Filters
• Up to 8 Kb – Two Perfect-match Filters
• Receive Side Coalescing (RSC)
Virtualization Features
• Multi-mode I/O Virtualization Operations
• VXLAN
• NVGRE
• Virtual Machine Device Queues (VMDq)
• Next Generation VMDq
• 64 Transmit (Tx) and Receive (Rx) Queue Pairs Per Port
• Flexible Port Partitioning: 64 Virtual Functions Per Port
• Support for PCI-SIG SR-IOV Specication
• IEEE 802.1Q Virtual Local Area Network (VLAN) Support with VLAN Tag Insertion,
Stripping, and Packet Filtering for up to 4096 VLAN tags
Remote Boot Options
• Preboot eXecution Environment (PXE) Flash Interface Support
• Intel Ethernet FCoE Boot
• Intel Ethernet iSCSI Remote Boot
• Intel Boot Agent software: Linux boot via PXE or BOOTP, Windows Deployment Services,
or UEFI
Tabla de contenidos
Otros manuales de Controladores de Supermicro
Supermicro
Supermicro AOC-S25G-m2S Manual de usuario
Supermicro
Supermicro AOC-S3616L-L16iT Manual de usuario
Supermicro
Supermicro AOC-M25G-m4S Manual de usuario
Supermicro
Supermicro AOC-S3216L-L16iT Manual de usuario
Supermicro
Supermicro AOC-2UR68G4-m2TS Manual de usuario
Supermicro
Supermicro AOC-S3908L-H8iR Manual de usuario
Supermicro
Supermicro AOC-M25G-i2S Manual de usuario
Supermicro
Supermicro AOC-MHIBF-m2Q2G Manual de usuario
Supermicro
Supermicro AOC-MTG-i2T Manual de usuario
