Supermicro AOC-MTG-i2T Manual de usuario
User's Guide
Revision 1.0b
AOC-MTG-i2T
AOC-MTG-i4T
User's Guide Revision 1.0b
Release Date: March 4, 2019
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2019 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
The information in this user's guide has been carefully reviewed and is believed to be accurate. The
vendor assumes no responsibility for any inaccuracies that may be contained in this document, and
makes no commitment to update or to keep current the information in this user's guide, or to notify
any person or organization of the updates. Please Note: For the most up-to-date version of this
user's guide, please see our Website at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this user's guide at any time and without notice. This product, including software and
documentation, is the property of Supermicro and/or its licensors, and is supplied only under a
license. Any use or reproduction of this product is not allowed, except as expressly permitted by
the terms of said license.
IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE
USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.
SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between the manufacturer and the customer shall be governed by the laws of
Santa Clara County in the State of California, USA. The State of California, County of Santa Clara
shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for
all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.
WARNING: This product can expose you to chemicals including
lead, known to the State of California to cause cancer and birth
defects or other reproduc�veharm. Formore informa�on, go
to www.P65Warnings.ca.gov.
!
Preface
About this User's Guide
This user's guide is written for system integrators, IT technicians, and
knowledgeable end users. It provides information for the installation and use of the
AOC-MTG-i2T/i4T add-on card.
About this Add-on Card
The Supermicro AOC-MTG-i4T and AOC-MTG-i2T are the most feature rich low
power 10GBase-T controllers in the market today. Based on the Intel® X550 chipset
with virtualization features such as VXLAN and NVGRE, it oers exible connec-
tivity selection for all networking requirements. The second generation integrated
10GbE MAC+PHY drives down both cost and power enabling a highly cost eective
deployment of 10GbE in the data center. The AOC-MTG-i4T and AOC-MTG-i2T
are among the most innovative 10GbE controllers in the market and an excellent
choice to expand network connectivity in data centers and enterprise environments.
An Important Note to the User
All images and layouts shown in this user's guide are based upon the latest PCB
Revision available at the time of publishing. The card you have received may or
may not look exactly the same as the graphics shown in this user's guide.
Returning Merchandise for Service
A receipt or copy of your invoice marked with the date of purchase is required before
any warranty service will be rendered. You can obtain service by calling your ven-
dor for a Returned Merchandise Authorization (RMA) number. When returning the
motherboard to the manufacturer, the RMA number should be prominently displayed
on the outside of the shipping carton, and the shipping package is mailed prepaid
or hand-carried. Shipping and handling charges will be applied for all orders that
must be mailed when service is complete. For faster service, you can also request
a RMA authorization online (http://www.supermicro.com/RmaForm/).
This warranty only covers normal consumer use and does not cover damages in-
curred in shipping or from failure due to the alternation, misuse, abuse or improper
maintenance of products.
During the warranty period, contact your distributor rst for any product problems.
Preface
iii
iv
AOC-MTG-i2T/i4T Add-on Card User's Guide
Conventions Used in the User's Guide
Pay special attention to the following symbols for proper system installation and to
prevent damage to the system or injury to yourself:
Warning: Important information given to ensure proper system installation
or to prevent damage to the components or injury to yourself.
Note: Additional information given to dierentiate between various models
or provides information for correct system setup.
Naming Convention
SMC Networking Add-on Cards
Naming Convention for SIOM Network Adapters
A O C – MH IBF – 2 Q G
1 – 2 3 – 6 7 8
Character Representation Options
1st Product Family AOC: Add On Card
2nd Form Factor S: Standard, P: Proprietary, C: MicroLP,
M: Super IO Module (SIOM), MH: SIOM Hybrid
3rd Product Type/Speed G: GbE (1Gb/s), TG: 10GbE (10Gb/s), 25G: 25GbE (25Gb/s),
40G: 40GbE (40Gb/s), 50G: 50GbE (50Gb/s), 100G: 100GbE
(100Gb/s), IBE: EDR IB (100Gb/s), IBF: FDR IB (56Gb/s),
IBQ: QDR IB (40Gb/s), HFI: Host Fabric Interface
4th Chipset Model (Optional) N: Niantec (82599), P: Powerville (i350), S: Sageville (X550)
5th Chipset Manufacturer (Optional) i: Intel, m: Mellanox, b: Broadcom
6th Number of Ports 1: 1 port, 2: 2 ports, 4: 4 ports
7th Connector Type (Optional) S: SFP+/SFP28, T: 10GBase-T, Q: QSFP+, C: QSFP28
8th 2nd Controller/Connector Type
(Optional)
G: GbE RJ45, S: 10G SFP+, T: 10GBase-T
Model Type Form Factor Controller Connection Dimension
(w/o Brackets) (L x H)
Power
(W)
SGP-i2 GbE Standard LP Intel® i350 AM2 2 RJ45 (1Gb/port) 3.9” (99mm) x 2.73” (69mm) 3.5
SGP-i4 GbE Standard LP Intel® i350 AM4 4 RJ45 (1Gb/port) 3.9” (99mm) x 2.73” (69mm) 5
STG-b4S 10GbE Standard LP Broadcom® BCM57840S 4 SFP+ (10Gb/port) 5.4” (137mm) x 2.73” (69mm) 14
STG-i2T 10GbE Standard LP Intel® X540-AT2 2 RJ45 (10GBase-T) 5.9” (150mm) x 2.73” (69mm) 13
STGN-i2S 10GbE Standard LP Intel® 82599ES 2 SFP+ (10Gb/port) 4.0” (102mm) x 2.73” (69mm) 11.2
STGN-i1S 10GbE Standard LP Intel® 82598EN 1 SFP+ (10Gb/port) 4.0” (102mm) x 2.73” (69mm) 10
STG-i4S 10GbE Standard LP Intel® XL710-AM1 4 SFP+ (10Gb/port) 5.9” (150mm) x 2.73” (69mm) 8
S40G-i2Q 40GbE Standard LP Intel® XL710 AM2 2 QSFP+ (40Gb/port) 5.9” (150mm) x 2.73” (69mm) 7
PTG-i1S 10GbE Proprietary Intel® 82599EN 1 SFP+ (10Gb/port) 10.04” (255mm) x .78” (20mm) 7.5
UG-i4 GbE UIO FH Intel® 82571EB 4 RJ45 (1Gb/port) 6.6” (167mm) x 3.9” (98mm) 10
CGP-i2 GbE MicroLP Intel® i350 AM2 2 RJ45 (1Gb/port) 4.45” (113mm) x 1.54” (39mm) 4
CG-i2 GbE MicroLP Intel® 82580 2 RJ45 (1Gb/port) 4.45” (113mm) x 1.3” (34mm) 4
CIBF-m1 FDR IB MicroLP Mellanox® ConnectX-3 1 QSFP (56Gb/port) 4.85" (123mm) x 1.54" (39mm) 7
CIBQ-m1 QDR IB MicroLP Mellanox® ConnectX-3 1 QSFP (40Gb/port) 4.85" (123mm) x 1.54" (39mm) 7
CTG-i1S 10GbE MicroLP Intel® 82599EN 1 SFP+ (10Gb/port) 4.85" (123mm) x 1.54" (39mm) 10
CTG-i2S 10GbE MicroLP Intel® 82599ES 2 SFP+ (10Gb/port) 4.85" (123mm) x 1.54" (39mm) 11
CTG-i2T 10GbE MicroLP Intel® X540 2 RJ45 (10GBase-T) 4.8” (123mm) x 2.75” (77mm) 13
CTGS-i2T 10GbE MicroLP Intel® X550 2 RJ45 (10GBase-T) 4.45” (113mm) x 1.54” (39mm) 12
MGP-i2 GbE SIOM Intel® i350 AM2 2 RJ45 (1Gb/port) 3.622" (92mm) x 3.428" (87.1mm) 3.7
MGP-i4 GbE SIOM Intel® i350 AM4 4 RJ45 (1Gb/port) 3.622" (92mm) x 3.428" (87.1mm) 4.4
MTGN-i2S 10GbE SIOM Intel® 82599ES 2 SFP+ (10Gb/port) 3.622" (92mm) x 3.428" (87.1mm) 7.2
MTG-i4S 10GbE SIOM Intel® XL710-AM1 4 SFP+ (10Gb/port) 3.622" (92mm) x 3.428" (87.1mm) 7
MTG-i2T 10GbE SIOM Intel® X550 2 RJ45 (10GBase-T) 3.622" (92mm) x 3.428" (87.1mm) 13
MTG-i4T 10GbE SIOM Intel® X550 4 RJ45 (10GBase-T) 3.622" (92mm) x 3.428" (87.1mm) 26
v
Preface
Contacting Supermicro
Headquarters
Address: Super Micro Computer, Inc.
980 Rock Ave.
San Jose, CA 95131 U.S.A.
Tel: +1 (408) 503-8000
Fax: +1 (408) 503-8008
Email: [email protected] (General Information)
Website: www.supermicro.com
Europe
Address: Super Micro Computer B.V.
Het Sterrenbeeld 28, 5215 ML
's-Hertogenbosch, The Netherlands
Tel: +31 (0) 73-6400390
Fax: +31 (0) 73-6416525
Email: [email protected] (General Information)
Asia-Pacic
Address: Super Micro Computer, Inc.
4F, No. 232-1, Liancheng Rd.
Chung-Ho Dist., New Taipei City 235
Taiwan, R.O.C.
Tel: +886-(2) 8226-3990
Fax: +886-(2) 8226-3991
Website: www.supermicro.com.tw
Email: [email protected] (Technical Support)
Tel: +886-(2) 8226-5990 (Technical Support)
Table of Contents
Preface
About this User's Guide ................................................................................................ 3
About this Add-on Card................................................................................................. 3
An Important Note to the User...................................................................................... 3
Returning Merchandise for Service............................................................................... 3
Conventions Used in the User's Guide......................................................................... 4
Naming Convention....................................................................................................... 4
SMC Networking Add-on Cards .................................................................................... 4
Contacting Supermicro.................................................................................................. 5
Chapter 1 Overview
1-1 Overview ......................................................................................................... 1-1
1-2 Key Features................................................................................................... 1-1
1-3 Specications .................................................................................................. 1-2
Chapter 2 Hardware Components
2-1 Add-On Card Image and Layout..................................................................... 2-1
2-2 Major Components.......................................................................................... 2-3
2-3 LAN Ports and LAN LED Indicators................................................................ 2-4
LAN Ports ................................................................................................... 2-4
LAN Port LED Indicators............................................................................ 2-4
2-4 Jumpers and Connectors................................................................................ 2-5
Explanation of Jumpers .................................................................................. 2-5
LAN Port Enable/Disable ........................................................................... 2-5
DIP Switch.................................................................................................. 2-6
Overheat LED............................................................................................. 2-6
Chapter 3 Installation
3-1 Static-Sensitive Devices.................................................................................. 3-1
3-2 Before Installation ........................................................................................... 3-2
3-3 Installing the Add-on Card .............................................................................. 3-2
3-3-1 AOC-MTG-i4T and AOC-MTG-i2T......................................................... 3-2
3-3-2 AOC-MTG-i4TM and AOC-MTG-i2TM Internal...................................... 3-3
AOC-MTG-i4TM and AOC-MTG-i2TM Swappable Bracket............................ 3-4
3-4 Installing Drivers on Windows......................................................................... 3-5
3-5 Installing Drivers on Linux ............................................................................. 3-5
Build a Binary RPM Package.......................................................................... 3-5
3-6 Installing Drivers on FreeBSD ........................................................................ 3-7
AOC-MTG-i2T/i4T Add-on Card User's Guide
vi
Chapter 1: Overview
1-1
Chapter 1
Overview
1-1 Overview
Congratulations on purchasing your add-on card from an acknowledged leader in
the industry. Supermicro products are designed with the utmost attention to detail
to provide you with the highest standards in quality and performance. For product
support and updates, please refer to our website at http://www.supermicro.com/
products/nfo/networking.cfm#adapter.
1-2 Key Features
The key features of this add-on card include the following:
• Super IO Module (SIOM) Form Factor
• Intel® X550 10GbE controller
• Quad and Dual RJ45 Connectors
• Network Virtualization Ooads: VXLAN and NVGRE
• VMDq and SR-IOV for virtualized Environment
• Asset Management Features with thermal sensor
• NC-SI for Remote Management
• AOC-MTG-i4T has two controllers that are in reversed order. If you are
intent to use NC-SI feature on this card, please note that your NC-SI
port is assigned to LAN 3. If you wish to learn more about IPMI setup,
please refer to this document: https://www.supermicro.com/manuals/other/
IPMI_Users_Guide.pdf.
• Supports RJ-45 Category-6 and 6A cables
• RoHS compliant 6/6
1-2
AOC-MTG-i2T/i4T Add-on Card User's Guide
1-3 Specications
General
• Intel® X550 10GbE controller with integrated 10GBase-T copper PHYs
• Super I/O Module (SIOM) Form Factor
• Quad and dual RJ45 ports
I/O Features
• MSI/MSI-X support
• Low Latency
• Multiple Queues – 64 Tx and Rx Per Port
• Tx/Rx IP, SCTP, TCP, and UDP Checksum Ooading (IPv4, IPv6) Capabilities
• Tx TCP Segmentation Ooad (IPv4, IPv6)
• Receive and Transmit Side Scaling for Windows Environment and Scalable I/O
for Linux Environments (IPv4, IPv6 and TCP/ UDP)
Virtualization Features
• Network Virtualization Stateless Ooad: VXLAN, NVGRE
• Support for Virtual Machine Device Queues (VMDq)
• 64 Transmit (Tx) and Receive (Rx) Queue Pairs Per Port
• FPP – 64 VFs per Port
• PCI-SIG SR-IOV
• 802.1q VLAN support
Chapter 1: Overview
1-3
Manageability Features
• Preboot eXecution Environment (PXE) support
• Remote Boot iSCSI and FCoE
• EEEE 1588
• Asset Management support on Supermicro® platforms
• NC-SI for Remote Management on Supermicro® platforms
Cables Support
• RJ-45 Category-6 up to 55m; Category-6A up to 100m
Power Consumption
• AOC-MTG-i4T: Typical 22W, Maximum 26W
• AOC-MTG-i2T: Typical 11W, Maximum 13W
Operating Conditions
• Operating temperature: 0°C to 55°C (32°F to 131°F)
• Storage temperature: -40°C to 70°C (-40°F to 158°F)
• Storage humidity: 90% non-condensing relative humidity at 35ºC
Physical Dimensions
• • Card PCB dimensions: 92mm (3.62in) x 87.1mm (3.43in) (W x D)
Compliance/Environmental
• RoHS Compliant 6/6, Pb Free
1-4
AOC-MTG-i2T/i4T Add-on Card User's Guide
Supported Platforms
• Supermicro® motherboards with Super I/O Module slot
• Supermicro® server systems with Super I/O Module slot (See SIOM Compat-
ibility Matrix online)
http://www.supermicro.com/support/resources/AOC/AOC_Compatibility_SIOM.
cfm
Supported Operating Systems
Operating System IA32 X64 IPF
Windows® 7 SP1 X
Windows 8, 8.1 X
Windows 10 X
Windows Server 2008 R2 X
Windows 2012, 2012 R2 X
Windows PE 3.0 (2008 R2 PE) X X
Windows PE 4.0 (2012 PE) X X
Windows PE 5.0 (2023 R2 PE) X X
Linux Stable Kernel
Version 2.6/3.x/4.x
XXX
Linux RHEL 6.7/7.1 X X
Linux SLES 11 SP4 XXX
Linux SLES 12 X X
FreeBSD 10.2 X X
UEFI 2.1/2.3 X X
UEFI 2.4 X
VMWare ESXi 5.5/6.0 X
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Controladores de Supermicro
Supermicro
Supermicro AOC-STGS-i1T Manual de usuario
Supermicro
Supermicro AOC-MHIBF-m2Q2G Manual de usuario
Supermicro
Supermicro AOC-S3216L-L16iT Manual de usuario
Supermicro
Supermicro AOC-S3616L-L16iT Manual de usuario
Supermicro
Supermicro AOC-2UR68G4-m2TS Manual de usuario
Supermicro
Supermicro AOC-S25G-m2S Manual de usuario
Supermicro
Supermicro AOC-S3908L-H8iR Manual de usuario
Supermicro
Supermicro AOC-M25G-m4S Manual de usuario
Supermicro
Supermicro AOC-M25G-i2S Manual de usuario
