Supermicro SAS-837A Manual de usuario

Rev. 1.0

SAS-837A BACKPLANE

USER'S GUIDE

JP6

JP5

JP4

DESIGNED IN USA

A18

B18

PRI_J0

A18

B18

PRI_J1

A18

B18

PRI_J2

A18

B18

SEC_J0

A18

B18

SEC_J1

A18

B18

SEC_J2

MH9

MH8

MH7

MH6

MH5

MH4 MH3

MH2 MH10 MH1

D65

D54

A C

D53

U18

U24

C81

C119

C285

C198

C85

C84

C45

C44

C202

C201

C197

C58

C76

C152

C111

JP10

JP13

JP46

BAR CODE

JP6:

OPEN: DEFAULT

SEC:#8-#11

PRI:#8-#11

SEC:#4-#7

PRI:#4-#7

SEC:#0-#3

PRI:#0-#3

JP4:I2C

CLOSE: FAILLED TEST

JP5:

OPEN: DEFAULT

CLOSE: ACT LEDTEST

REV 1.00

SAS837A

SUPER ®

SAS-837A Backplane User's Guide

Manual Revision 1.0

Release Date: January 26, 2011

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATASTORED OR USED WITHTHE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Safety Information and Technical Speciﬁcations

Table of Contents

Contacting Supermicro.......................................................................................iv

Returning Merchandise for Service.....................................................................v

Chapter 1 Safety Guidelines

1-1 ESD Safety Guidelines ................................................................................... 1-1

1-2 General Safety Guidelines..............................................................................1-1

1-3 An Important Note to Users............................................................................1-2

1-4 Introduction to the SAS-837A Backplane........................................................ 1-2

Chapter 2 Connectors, Jumpers and LEDs

2-1 Front Connectors ............................................................................................ 2-1

2-2 Front Connector and Pin Deﬁnitions............................................................... 2-2

2-3 Front LED Indicators.......................................................................................2-3

2-4 Rear Connectors and LED Indicators............................................................. 2-4

Chapter 3 Connecting the SAS2-837A and SAS-837EL Backplanes

3-1 Connecting Dual Backplanes.......................................................................... 3-1

Identifying the Backplanes..............................................................................3-1

Conﬁguring Dual Backplanes.......................................................................... 3-2

SAS-837A Backplane User's Guide

Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Web Site: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Asia-Paciﬁc

Address: Super Micro Computer, Inc.

4F, No. 232-1, Liancheng Rd.

Chung-Ho 235, Taipei County

Taiwan, R.O.C.

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3991

Web Site: www.supermicro.com.tw

Technical Support:

Email: [email protected]

Tel: 886-2-8226-1900

Safety Information and Technical Speciﬁcations

Returning Merchandise for Service

A receipt or copy of your invoice marked with the date of purchase is required be-

fore any warranty service will be rendered. You can obtain service by calling your

vendor for a Returned Merchandise Authorization (RMA) number. When returning

to the manufacturer, the RMA number should be prominently displayed on the

outside of the shipping carton, and mailed prepaid or hand-carried. Shipping and

handling charges will be applied for all orders that must be mailed when service

is complete.

For faster service, RMA authorizations may be requested online (http://www.

supermicro.com/support/rma/).

Whenever possible, repack the backplane in the original Supermicro box, using the

original packaging materials. If these are no longer available, be sure to pack the

backplane in an anti-static bag and inside the box. Make sure that there is enough

packaging material surrounding the backplane so that it does not become damaged

during shipping.

This warranty only covers normal consumer use and does not cover damages in-

curred in shipping or from failure due to the alteration, misuse, abuse or improper

maintenance of products.

During the warranty period, contact your distributor ﬁrst for any product problems.

SAS-837A Backplane User's Guide

Notes

1-1

Safety Information and Technical Speciﬁcations

Chapter 1

Safety Guidelines

To avoid personal injury and property damage, carefully follow all the safety steps

listed below when accessing your system or handling the components.

1-1 ESD Safety Guidelines

Electrostatic Discharge (ESD) can damage electronic components. To prevent dam-

age to your system, it is important to handle it very carefully. The following measures

are generally sufﬁcient to protect your equipment from ESD.

Use a grounded wrist strap designed to prevent static discharge.

•

Touch a grounded metal object before removing a component from the antistatic•

bag.

Handle the backplane by its edges only; do not touch its components, peripheral

•

chips, memory modules or gold contacts.

When handling chips or modules, avoid touching their pins.

•

Put the backplane and peripherals back into their antistatic bags when not in•

use.

1-2 General Safety Guidelines

Always disconnect power cables before installing or removing any components•

from the computer, including the backplane.

Disconnect the power cable before installing or removing any cables from the

•

backplane.

Make sure that the backplane is securely and properly installed on the mother-

•

board to prevent damage to the system due to power shortage.

1-2

SAS-837A Backplane User's Guide

1-3 An Important Note to Users

All images and layouts shown in this user's guide are based upon the latest PCB

revision available at the time of publishing. The card you have received may or may

not look exactly the same as the graphics shown in this manual.

1-4 Introduction to the SAS-837A Backplane

The SAS-837Abackplane has been designed to utilize the most up-to-date technol-

ogy available, providing your system with reliable, high-quality performance.

This manual reﬂects SAS-837ARevision 1.00, the most current release available at

the time of publication.Always refer to the Supermicro Web site at www.supermicro.

com for the latest updates, compatible parts and supported conﬁgurations.

2-1

Safety Information and Technical Speciﬁcations

JP6

JP5

JP4

DESIGNED IN USA

A18

B18

PRI_J0

A18

B18

PRI_J1

A18

B18

PRI_J2

A18

B18

SEC_J0

A18

B18

SEC_J1

A18

B18

SEC_J2

MH9

MH8

MH7

MH6

MH5

MH4 MH3

MH2 MH10 MH1

D65

D54

A C

D53

U18

U24

C81

C119

C285

C198

C85

C84

C45

C44

C202

C201

C197

C58

C76

C152

C111

JP10

JP13

JP46

BAR CODE

JP6:

OPEN: DEFAULT

SEC:#8-#11

PRI:#8-#11

SEC:#4-#7

PRI:#4-#7

SEC:#0-#3

PRI:#0-#3

JP4:I2C

CLOSE: FAILLED TEST

JP5:

OPEN: DEFAULT

CLOSE: ACT LEDTEST

REV 1.00

SAS837A

Chapter 2

Connectors, Jumpers and LEDs

2-1 Front Connectors

Front Connectors

I1. 2C connector: JP4:I2C

Power connectors: JP46, JP13 and2. JP10.

Primary SAS port: PRI_J03.

Primary SAS port: PRI_J14.

Figure 2-1: Front Connectors

Primary SAS port: PRI_J25.

Secondary SAS port: SEC_J06.

Secondary SAS port SEC_J17.

Secondary SAS port SEC_J28.

2-2

SAS-837A Backplane User's Guide

1. I2C Connector

TheI2Cconnectorisusedtomonitorthepower

supplystatusandto controlthefans. Seethe

table on the right for pin deﬁnitions.

I2C Connector

Pin Deﬁnitions

Pin# Deﬁnition

1 Data

2 Ground

3 Clock

4 No Connection

2-2 Front Connector and Pin Deﬁnitions

Backplane

Main Power

4-Pin Connector

Pin# Deﬁnition

1+12V

2 and 3 Ground

4 +5V

2. Backplane Main Power Connectors

The 4-pin connectors, designated JP46,

JP13 and JP10 provide power to the back-

plane. See the table on the right for pin

deﬁnitions.

3. - 8. SAS Ports

The primary and secondary sets of SAS

ports provide expander features including

cascading and failover. From right to left the

ports are Primary 0 through Primary 2 and

Secondary 0 through Secondary 2.

Tabla de contenidos

Otros manuales de Hardware de computadora de Supermicro

Supermicro

Supermicro AOC-SLG3-2M2-O Manual de usuario

Supermicro

Supermicro SC846 JBOD Series Manual de usuario

Supermicro

Supermicro H13SST-G Manual de usuario

Supermicro

Supermicro B13SEE-CPU-25G Manual de usuario

Supermicro

Supermicro AOC-MTGN-i2S Manual de usuario

Supermicro

Supermicro X12SPW-TF Manual de usuario

Supermicro

Supermicro B2SC1-CPU Manual de usuario

Supermicro

Supermicro SuperWorkstation 5038A-I Manual de usuario

Supermicro

Supermicro A+ Server AS -3015A-I Manual de usuario

Supermicro

Supermicro H13SSL-N Manual de usuario

Supermicro

Supermicro AOC-UIBQ-m1 Manual de usuario

Supermicro

Supermicro SC815 series Manual de usuario

Supermicro

Supermicro H13SSH Manual de usuario

Supermicro

Supermicro SuperStorage SSG-1129P-ACR10N4L Manual de usuario

Supermicro

Supermicro BPN-SAS3-833A Manual de usuario

Supermicro

Supermicro A2SD1-3750F Manual de usuario

Supermicro

Supermicro BPN-SAS3-LB16A-N10 Manual de usuario

Supermicro

Supermicro AOC-R1UG-IBQ Manual de usuario

Supermicro

Supermicro SC825 Air Shroud Manual de usuario

Supermicro

Supermicro X11SDC-4C Manual de usuario

Supermicro

Supermicro B2SC2-TF Manual de usuario

Supermicro

Supermicro M12SWA-TF Manual de usuario

Supermicro

Supermicro BPN-SAS3-825TQ Manual de usuario

Supermicro

Supermicro AOC-CTG-b2T Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario