strex SP48 Manual de usuario
Strex Wildlife Camera
Bedankt voor het kiezen van Strex! Lees voor gebruik de
handleiding aandachtig door voor een correcte en veilige
werking van het product. Volg altijd deze instructies voor
veilig gebruik.
Als je vragen hebt over het product of problemen ondervindt,
kun je contact met ons opnemen via email:
User manual SP48
English
Nederlands
STREX
INTRODUCTION
Getting started
WARNING
Thanks for choosing Strex! Read the manual carefully, for correct and safe operation of the
product. Always follow these instructions for safe usage.
If you have any questions about the product or encounter problems,
The illustrations in this manual have been created with care. However, some parts of the
product may dier from the illustration shown in this manual. In that case, Strex is not obliged
to adjust the part or the manual.
This manual is intended for the end user of the product. Using the table of contents on the next
page you can nd the necessary information in the manual.
2
Improper use of this product and accessories are dangerous to you
and others and can damage, destroy or cause a serious accident. We
therefore ask you to read the manual carefully and to read and strictly
observe the danger, safety and warning messages.
Strex Wildlife Camera
For professionals, hobbyists, hunters and nature lovers
Whoever or whatever you want to observe, the reliable Strex Wildlife Camera can bring you
closer than ever. During the day or at night, take a look at the vibrant animal world and record
the animals, their behavior and other details; this way you know exactly what is really happening
when there are no people around.
CONTENT
3
!Nederlands
1. Wildcamera ...................................................................15
2. Specicaties ..................................................................17
3. Functies .........................................................................18
4. Probleemoplossingen ..................................................21
!English
1. Structure .........................................................................5
2. Parameter .......................................................................7
3. Functions ........................................................................8
4. Troubleshooting ...........................................................11
PRODUCT INTRODUCTION
Some Tips Before Everything
• If you observe a red ash when you take photos, please turn the switch from “TEST” to
“ON”
• After you turn the switch from “TEST” to “ON”, you will observe a countdown from 15s to
Is, then the screen will shut down. This is completely normal. You can walk in front of the
camera to check if it takes photos and videos.
• Do not dip the camera in the water.
• The camera can work under 160°F but please keep the camera far enough from re to
protect batteries.
• Alkaline batteries are recommended because alkaline batteries are able to provide
strong and stable power to the camera.
• Please do not mix old batteries and new batteries.
• If an DC 6V power adapter is used to supply the camera, please make sure there are
no batteries in the camera in order to prevent the overcharge.
4
photosensor
LED
Indicator
Central RIP
Sensor
Lens
Latch
Side PIR Sensor
STREX WILDLIFE
CAMERA
>
>
>
>
>
>
90mm
135mm
76mm
Power Switch/Test Mode
Battery Comparttement
Micro USB Port
SD Card Slot
Extreme Power Port Stand Knob Port
1. Structure
5
High power invisible LED
Structure
Color Dispaly Screen 8AA Batteries Depot
Setup Buttons
Mode Switch
Stand Knob Port
Micro SD Card Slot
External Power Port
USB Port
Mounting Strap
USB Cable
6
2. Parameter
Photo Resolution 24/20/16/12/8/5/3/1 MP
Video Resolution 1 1080P/720P/480P/240P
Detection Angle Up to 120°
Detection Distance 80ft (day), 65ft (night)
Fill Light LED Wavelength 940nm (Low Glow)
Fill Light LED Quantity 36 pcs
Trigger Time 0.2s - 0.5s
Waterproof Level IP65
Working Temperature -4°F - 160°F
Memory Card Type Up to 32G TF Card (Class 10)
Power Supply Type Battery/External
Battery Type AA Battery
Working Voltage 6V
External Power Supply DC 6V
Standby Time Up to 6 Months
Photo Format JPEG
Video Format AVI
Screen Size 2.0 Inches
Size 135x90x76 MM
Weight 0.38 kG
7
INSTRUCTIONS
8
Prepare for use
Placement
Insert 8x AA batteries and an empty microSD card (maximum
32GB) into the wildlife camera.
Pay attention! When using an AC adapter, there should be no
batteries in the unit.
Slide the o / test / on button to “on”. The display will turn o
after 15 seconds. The camera is now ready for use and will
record images.
1.
3.
How to use the Wildcamera
Setup
View recordings
Slide the o / test / on button to “test” to enter the setup menu.
In this menu you can select the desired settings and view
images. See the chapter “functions” for all options.
Slide the o / test / on button to “test” and click the “REPLAY”
button to replay the images.
It is also possible to read the microSD with a computer or
to connect the wildlife camera to a computer by using the
supplied USB cable.
2.
4.
3. Function
Mode You could choose the working mode Photos (default)
Videos, Photos & Videos
Photo
Resolution
You can choose dierent photo
resolution
24MP 16MP
12MP 5MP
3MP IMP
8MP (default)
Photo
Series
You can set the photo quantity
when the camera is activated
1 photo
(default)
2 photos in series
3 photos in series
10 photos in series
Video
Resolution You can choose dierent video resolution
1920*1080P
(default)
1280*720P 848*480P
720*480P 640*480P
320*240P
Video
length
You can choose the length of
video
3 seconds
to 10 min.
Audio
Recording
You can decide if you want the
camera to record sounds
On (default)
O
Shot Lag The time interval between each
trigger111
5 seconds
(default)
to
60 minutes max.
Side
Motion
Sensors
You can turn On / O Side Motion Sensors On / O
Sensitivity
Motion
Sensors
You can adjust the sensitivity of
the motion detection sensor.
Low
Middle (default)
High
9
Target
Recording
Time(2)
You can set the camera to
record between a certain period
On (to set the
period)
O (default)
Time
Lapse
Set up time lapse mode and the
length of the lapse.
On /
O (default)
Language To set dierent language
English
(defalut),
Deutsch,
Dansk,
Suomi,
Svenska,
Espanol,
Franpais,
Italiano,
Nederlands,
Portugues,
Endless
Capture
If Endless Capture mode is on, the
camera won’t stop recording
when the memory card is full but
will delete the oldest videos or
photos to keep recording
continuously
On
O (default)
Time &
Date
To set time and date. You can
also choose the time format (24h
or 12h) and choose the date
format (dd/mm/yyyy,
yyyy/mm/dd or mm/dd/yyyy)
Set Time & Date
Time Format
Date Format
Photo To choose if there will be time Time & Date
Stamp and date on the photo.
(default)
Date
O
Password
Protection
Set up password to secure your
camera
On
O (default)
10
Otros manuales para SP48
1
Tabla de contenidos
Idiomas:
Otros manuales de Cámara digital de strex
