strex SP48 Manual de usuario
Strex Wildlife Camera
Thanks for choosing Strex! Read the manual carefully for
correct and safe operation of the product. Always follow these
instructions for safe usage.
If you have any questions about the product or encounter
User manual SP48
English
Nederlands
STREX
INTRODUCTION
Getting started
WARNING
Thanks for choosing Strex! Read the manual carefully for correct and safe operation of the
product. Always follow these instructions for usage.
If you have any questions about the product or encounter problems,
The illustrations in this manual have been created with care. However, some parts of the
product may dier from the illustration shown in this manual. In that case, Strex is not obliged
to adjust the part or the manual.
This manual is intended for the end user of the product. Using the table of contents on the next
page you can nd the necessary information in the manual.
Improper use of this product and accessories are dangerous to you
and others and can damage, destroy or cause a serious accident. We
therefore ask you to read the manual carefully and to read and strictly
observe the danger, safety and warning messages.
Strex Wildlife Camera
For professionals, hobbyists, hunters and nature lovers
Whoever or whatever you want to observe, the reliable Strex Wildlife Camera can bring you
closer than ever. During the day or at night, take a look at the vibrant animal world and
record the animals, their behavior and other details. This way you know exactly what is really
happening when there are no people around.
2
CONTENT
!English
1.
2.
3. Installation guide......................................................................... 8
4. Review footage............................................................................. 9
5. Settings ....................................................................................... 10
6. Troubleshooting......................................................................... 11
!Nederlands
1.
2.
3. Klaarmaken voor gebruik.................................................. ....... 17
4. Beeldmateriaal terugkijken .....................................................18
5. Instellingen ......................................................... ....................... 19
6. Probleem oplossingen ........................................................... ... 20
Specications ............................................................................... 7
Structure....................................................................................... 5
Specicaties................................................................................ 16
Structuur..................................................................................... 14
3
PRODUCT INTRODUCTION
Some tips before you start
• If a DC power adapter is used to power the camera, please make sure there are NO batteries
in the camera in order to prevent overcharging. This will cause permanent damage to the
wildlife camera
• Do not dip or submerse the wildlife camera underwater.
• The conguration of the wildlife camera should be done when in “TEST” mode. The “ON”
mode is only used when the installation is complete and ready for real world use.
• If you observe a red ash when you take photos, please turn the switch from “TEST” to “ON”
• For best performance do not mix old batteries and new batteries.
• The camera can work in temperatures of up to 70°C but please keep the camera far enough
from re to protect the batteries.
• To change the menu language rst enter settings mode (slide mode switch to “TEST”) then
click on the menu button and go to language to select the desired language.
• After you turn the switch from “TEST” to “ON”, you will observe a countdown from
10 seconds to 0 seconds then the screen will shut down. This is completely normal. You can
walk in front of the camera to check if it takes photos and videos.
4
PHOTOSENSOR LATCH
LED
INDICATOR
CENTRAL PIR
SENSOR
LENS
SIDE PIR SENSOR
MICRO USB PORT
MICRO SD
CARD SLOT
MODE SWITCH
EXTERNAL POWER
BATTERY COMPARTMENT
MOUNTING THREAD
135MM
76MM
90MM
HIGH POWER INVISIBLE LED
STREX WILDLIFE
CAMERA
1. Structure
5
1. Structure
MENU BUTTONS
MENU Open the settings menu
REPLAY Start replay mode (show saved photos / videos)
SHOT Manually take a photo or video depending on the congured recording
mode. Videos are also stopped by pressing the SHOT button.
OK Conrm / select button
Menu go left
Menu go right
Menu go up
(or manual video recording mode)
Menu go down
(or manual photo recording mode)
COLOR DISPLAY SCREEN 8*AA BATTERIES COMPARTMENT
MENU BUTTONS
6
2. Specications
Photo Resolution 30MP / 24MP / 20MP / 16MP / 12MP
Video Resolution 4K / 2K / 1080P / 720P / 480P (VGA)
Detection Angle Up to 120°
Detection Distance Up to 20 meters
IR LED Wavelength 940nm (Low Glow)
IR LED Quantity 36 pcs
Trigger Speed 0.2 seconds
Waterproof Level IP65
Working Temperature -20°C to +70°C
Memory Card Type Up to 256GB TF Card (Class 10)
Power Supply Type Battery / External
Battery Type AA battery (4/8pcs)
Working Voltage 6V
External Power Supply DC 6V 1.5A
Standby Time Up to 6 Months
Photo Format JPG
Video Format MP4 / H.264
Screen Size 2.0” TFT
Size 135x90x77mm
Weight 0.38 KG
7
3. Installation guide
off test on
off test on
MICRO SD
Menu shot
ok
REPLAY
Battery installation
Open the battery cover and insert 8* AA batteries. Make
sure the batteries are correctly placed (pos+ / neg-)
Do not insert any batteries when using a DC power adapter.
This will cause permanent damage to the camera!
1.
Enter TEST mode
Slide the mode switch to “TEST” to activate the camera and
view the setup screen. While in TEST mode you are able to
change all settings to the desired settings and also view
previous recordings.
3.
Enter ON mode
After you have completed all settings slide the mode switch
to “ON” to enter working mode. The screen will countdown
10 seconds and then go black. The camera is now in auto
working mode and will start taking photos and videos
based on the congured settings immediately.
5.
Memory card installation
Insert the micro SD memory card in the designated slot
with the contacts (gold plating) facing away. The micro SD
card should slide in freely with little resistance. Continue
pressing the card inward until you hear a click. The
microSD card is now locked in place and ready for use.
2.
Adjust desired settings
While in the “TEST” modus click the “MENU” button. While
in the menu you can congure all options to your desired
settings. See the chapter “Settings” for all available options.
4.
8
4. Review footage
Menu shot
ok
REPLAY
Option 1 : On the device
Slide the mode switch to “TEST”. Then click on the
“REPLAY” button to view all images and videos.
Use the menu buttons to navigate through all the footage.
MICRO SD
Option 2 : microSD card
Shut o the camera and take the microSD card out of the
camera. You can now insert the microSD card into a suitable
device such as TV, PC or Laptop to review all footage.
micro usb switch
Option 3 : USB connection
Connect the camera to a PC or laptop using the micro usb
cable. You can now review all footage on the connected
device.
9
5. Settings
Setting Description Options
Mode Choose the operation mode
Camera, Video
Camera & Video
Time Lapse
Resolution Choose the resolution for the videos 4K / 2K / 1080P /
720P / 480P (VGA)
Video length Choose the length of the video 5s / 10s / 30s / 60s / 90s
Record audio Choose to record audio when taking videos O / On
Image Size Choose the resolution for the photos 30MP / 24MP / 20MP /
16MP / 12MP
Interval Time between 2 detection moments 1s / 10s / 10m / 3m / 5m
10m / 15m / 30m
Time Lapse The time interval between each time lapse
shot taken
5m / 30m / 1h / 2h / 3h /
6h / 12h / 24h
Sequence Amount of photos to take on each trigger single / 3 / 6 / 9
ISO Adjust the exposure level Auto / 100 / 200 / 400
Overwrite Overwrite old recordings when the memory is
full O / On
PIR Sensitivity Adjust the PIR sensors sensitivity Low / Medium / High
Language Set a dierent language
English, Francais, Deutsch ,
Italiano, Espanol, Portugues,
Hrvatski, Dansk, Svenska,
Suomi, Polski, Pyccknn, Dutch
Frequency LCD screen refresh rate 50Hz / 60Hz
TV Mode Set TV mode NTSC / PAL
Camera ID Choose your own camera ID 6 numbers / letters
Password Set a password to protect your camera
(default password = 1314) 4 numbers
Timer Choose when the camera should be active 00:00:00 - 23:59:59
Date/Time Set the current date and time DD/MM/YY
Format Format the memory card
ALL DATA WILL BE DELETED Cancel / OK
Default
Setting Restore all settings to factory default Cancel / OK
10
Otros manuales para SP48
1
Tabla de contenidos
Idiomas:
Otros manuales de Cámara digital de strex
