Stratus SAE-F10P Guía

Model No. SAE-F10P

Chain drive 2 post Lift

Single Point Manual Release

Lifting Capacity 10,000 lbs

Installation & Operation &

Maintenance Instructions

Important Note

1. This equipment can not be installed, operated or repaired without reading instructions.

2. Electricity must be hooked up by certified electrician.

3. Do not use this equipment beyond its rated capacity.

STRATUS Floor Plate 2 post Lift Installation & Operation & Maintenance Instructions 
 

 
 TABLE OF CONTENTS 
 
Packing, transport and storage .......................................................................................................................................5 
1 Packing..............................................................................................................................................................................5 
2 Transport...........................................................................................................................................................................5 
3 Storage..............................................................................................................................................................................5 
Description of the machine...............................................................................................................................................6 
1 Fixed structure.................................................................................................................................................................6 
2 Moving units.....................................................................................................................................................................6 
3 Lift unit...............................................................................................................................................................................6 
5 Safety device....................................................................................................................................................................7 
Technical specifications....................................................................................................................................................8 
Safety....................................................................................................................................................................................10 
1 Important notices...........................................................................................................................................................10 
2 Qualified personnel .......................................................................................................................................................10 
3 Danger notices...............................................................................................................................................................10 
4 Training............................................................................................................................................................................10 
5 Warning signs.................................................................................................................................................................11 
Installation...........................................................................................................................................................................12 
1 Tool required...................................................................................................................................................................12 
2 Checking for room suitability........................................................................................................................................13 
3 Lighting.......................................................................................................................................................................13 
4 Floor requirement.....................................................................................................................................................13 
5 Site layout..................................................................................................................................................................13 
6 Anchoring columns...................................................................................................................................................14 
7 Routing the equalizer cables..................................................................................................................................15 
8 Install limit switch...........................................................................................................................................................16 
9 Routing the safety release cable............................................................................................................................22 
10 Installation of power unit.............................................................................................................................................23 
11 Connection of hydraulic hoses...................................................................................................................................23 
12 Make the electrical connection..................................................................................................................................23 
13 Oil filling and bleeding.................................................................................................................................................24 
14 Installation of lifting arms and adjustment of arm locks.........................................................................................25 
15 Check before start-up.................................................................................................................................................27 
15.1 General checks...................................................................................................................................................27 
15.2 Mechanical safeties for proper installation.................................................................................................27 
15.3 Equalizer cable for proper installation.........................................................................................................27 
15.4 Hydraulic system for proper operation........................................................................................................27 
16 Check with load ...........................................................................................................................................................27 
Operation and use.............................................................................................................................................................28 
1 Controls...........................................................................................................................................................................28 
2 Vehicle positioning....................................................................................................................................................28 
3 Lifting..........................................................................................................................................................................28 
4 Standing.....................................................................................................................................................................29 
5 Lowering....................................................................................................................................................................29 
Maintenance........................................................................................................................................................................30 
1 Ordinary maintenance...................................................................................................................................................30 
2 Periodic maintenance....................................................................................................................................................30 
Troubleshooting.................................................................................................................................................................31 
Parts list...............................................................................................................................................................................32 
1 Explode drawing and parts list.....................................................................................................................................32 
2 Power side column and parts list ................................................................................................................................34 
3 Off side column and parts list.......................................................................................................................................37 
4 Carriage and parts list...................................................................................................................................................40 
5 Arm assembly and parts list.........................................................................................................................................41 
Special notes....................................................................................................................................................................42 

STRATUS Floor Plate 2 post Lift Installation & Operation & Maintenance Instructions

10.1 Environmental damage...............................................................................................................................................42

10.2 Dismantling...................................................................................................................................................................42

10.3 Disposal........................................................................................................................................................................42

10.4 Noise declaration.........................................................................................................................................................43

STRATUS Floor Plate 2 post Lift Installation & Operation & Maintenance Instructions

Foreword

Notes on the operating instructions

The present ORIGINAL OPERATING INSTRUCTIONS are designed to provide sufficient instruction for the

safe operation of the product. The information is provided clearly and concisely. The chapters are arranged by

letter and the pages are numbered continuously.

Our products are subject to ongoing development. Our company reserves the right to alter the design,

equipment and technical features of the system. No guarantee of particular features of the product should

therefore be assumed from the present operating instructions.

Safety notices and text mark-ups

Safety instructions and important explanations are indicated by the following graphics:

Indicates an extremely hazardous situation. Failure to comply with this instruction will result in

severe irreparable injury and even death.

Indicates an extremely hazardous situation. Failure to comply with this instruction may result in

severe irreparable injury and even death.

Indicates a hazardous situation. Failure to comply with this instruction may result in

slight to medium injury.

Indicates a material hazard. Failure to comply with this instruction may result in material damage.

STRATUS Floor Plate 2 post Lift Installation & Operation & Maintenance Instructions

1. Packing, transport and storage

All packing, lifting, handling, transport and unpacking operations are to be performed exclusively by expert

personnel with knowledge of the lift and the contents of this manual.

1.1 Packing

The packing of the lift is delivered in following components:

•1 base unit packed in a steel frame, wrapped up in non-scratch material, including all the accessories.

•1 power unit packed in a carton box.

1.2 Transport

See Fig 1, packing can be lifted or moved by lift trucks, cranes or bridge cranes. In case of slinging, a second

person must always take care of the load, in order to avoid dangerous oscillations.

During loading and unloading operation, goods must be handled by vehicles or ships.

At the arrival of the goods, verify that all items specified in the delivery notes are included. In case of missing parts,

possible defects or damage due to transport operations.

If finding missing parts, possible defects or damage due to transport, one should examine damaged cartons

according to <<Packing List.>> to verify the condition of damaged goods and missing parts, also the person in

charge or the carrier must be immediately informed.

The machine is heavy goods! Don’t take manpower load and unload and transporting way into consideration, the

safety of working is important.

Furthermore, during loading and unloading operation goods must be handled as shown in the picture. (Fig 1)

Fig 1

1.3 Storage

The machine equipment should be stocked in the warehouse, if stocked outside should do the disposal well of

waterproof.

Use box truck in the process of transport, use container storage when shipping.

The control box should be placed perpendicularly during the transport; and prevent other goods from extrusion.

The temperature for machine storage: -10ºC -- 40ºC

STRATUS Floor Plate 2 post Lift Installation & Operation & Maintenance Instructions

2. Description of the machine

The electro-hydraulic 2-post lift is a fixed installation. This means that it is anchored to the ground and built for lifting

and positioning automobiles and vans at a certain height off the ground.

The lift consists of the following main parts(see Fig.2)：

Fig.2

2.1 Fixed structure

Posts and steel plate:

2 posts and command built with bent steel plate. The base is welded to a drilled plate to be anchored to the floor.

The hydraulic power unit are attached to the command post. Inside each post are the moving parts to lift the

vehicles.

The column set on the base.

2.2 Moving units

Carriages + arms:

1. Both carriages built with welded steel plate. It joints by chain and the cable, and at the bottom to the lift arms by

means of pins.

2. The carriage moves along the post, guided by plastic sliding pads. Located inside the post itself.

3. Two telescopic arms, one long and one short, built wit tubular steel with a pad at each end that can be height

adjusted to hold the car and on the opposite side the carriage connection hole.

2.3 Lift unit

Hydraulic cylinders + power unit:

2 hydraulic cylinders, the carriages run by chains and synchronized by steel cables.

1 hydraulic unit, on the command side, to set the cylinders run

The hydraulic power unit consists of:

1. An electric motor

2. A geared hydraulic pump

3. Descent hand-valve equipped with a manual oil drain valve (see the use and maintenance chapter)

STRATUS Floor Plate 2 post Lift Installation & Operation & Maintenance Instructions

4. A maximum pressure valve.

5. Oil tank

6. An oil delivery and return flexible pipe to the cylinders feeding circuit

Note: The oil delivery pipe may be under pressure.

Fig.3

2.5 Safety device

The safety devices include:

1 Mechanical safety device for carriage

2 Arms locking system

3 A synchronous device to control the carriages movement.

4 End limit switches

5 General hydraulic safety devices

These safety devices will be described in further detail in the following chapters.

STRATUS Floor Plate 2 post Lift Installation & Operation & Maintenance Instructions

3. Technical specifications

CAPACITY

10,000 lbs (4,500kg)

Max. lifting height with no pad extension

74 7/8”(1900mm)

Min. adaptor height

3 15/16” (100mm)

Overall height

111 1/4”(2824mm)

Overall width

134 1/4”(3410mm)

Drive through width

103 1/4” (2622mm)

Lifting time

≤50

Lowering time

≤40

Noise level

＜85 dB(A)/1m

Working temperature

41°F - 104°F

Voltage

220V/60Hz/1PH

Power

2.2KW /3HP

Breaker

30A

Hydraulic Fluid Requirement

3-5 Gallons AW32/AW46

Average weight of package

1411 lbs (640kg)

STRATUS Floor Plate 2 post Lift Installation & Operation & Maintenance Instructions

Fig.5 Layout

Fig. 4

STRATUS Floor Plate 2 post Lift Installation & Operation & Maintenance Instructions

4. Safety

4.1 Important notices

This 2-posts lift is specially designed for lifting motor vehicles that weighs within its outmost lifting capacity. Users

are not allowed to use it for any other purposes. Otherwise, we, as well as our sales agency, will not bear any

responsibility for accidents or damages of the lift. Make sure to pay careful attention to the label of the lifting

capacity attached on the lift and never try to lift cars with its weight beyond.

Read this manual carefully before operating the machine so as to avoid economic loss or personnel casualty

incurred by wrong operation. Without professional advice, users are not permitted to make any modification to the

control unit or whatever mechanical unit.

4.2 Qualified personnel

➢Only these qualified staff, who have been properly trained, can operate the lift.

➢Electrical connection must be done by a competent electrician.

➢People who are not concerned are not allowed in the lifting area.

4.3 Danger notices

➢Do not install the lift on any asphalt surface.

➢Read and understand all safety warnings before operating the lift.

➢The lift, if is not specially designed upon customer’s request, is not fit for outdoor use.

➢Keep hands and feet away from any moving parts. Keep feet clear of the lift when lowering.

➢Only these qualified people, who have been properly trained, can operate the lift.

➢Do not wear unfit clothes such as large clothes with flounces, tires, etc, which could be caught by moving parts

of the lift.

➢To prevent evitable incidents, surrounding areas of the lift must be tidy and with nothing unconcerned.

➢The lift is simply designed to lift the entire body of vehicles, with its maximum weight within the lifting capacity.

➢Always ensure the safety latches are engaged before any attempt to work near or under the vehicle.

➢Make sure to place the lifting pads to the positions as suggested by vehicle makers and when gradually lift the

vehicle to the desired height, operators should be certain that the vehicle will not slant, roll-over or slide in lifting

process.

➢Check at any time the parts the lift to ensure the agility of moving parts and the performance of synchronization.

Ensure regular maintenance and if anything abnormal occurs, stop using the lift immediately and contact our

dealers for help.

➢Lower the lift to its lowest position and do remember to cut off the power source when service finishes.

➢Do not modify any parts of the lift without manufacturer’s advice.

➢If the lift is going to left used for a long time, users are required to:

a. Disconnect the power source;

b. Empty the oil tank;

c. Lubricate the moving parts with hydraulic oil.

4.4 Training

Only these qualified people, who have been properly trained, can operate the lift. We are quite willing to provide

professional training for the users when necessary.

Attention: For environment protection, please dispose the disused oil in a proper way.

Tabla de contenidos

Otros manuales de Sistema de elevación de Stratus

Stratus

Stratus SAE-C9P Guía

Stratus

Stratus SAE-C12XE Guía

Stratus

Stratus SAE-UT9000 Guía

Stratus

Stratus SAE-C14X Guía

Stratus

Stratus SAE-F12X Guía

Stratus

Stratus SAE-S66M Manual de usuario

Stratus

Stratus SAE-P166M Guía

Stratus

Stratus SAE-UT8000 Guía

Stratus

Stratus SAE-F10S Instrucciones de instalación

Stratus

Stratus SAE-C10P Guía

Stratus

Stratus SAE-C10XE Guía

Stratus

Stratus SAE-F14X Guía

Stratus

Stratus SAE-C10C Guía

Stratus

Stratus SAE-P48 Guía

Stratus

Stratus SAE-C12X Guía

Stratus

Stratus MS9000XT Manual de usuario

Stratus

Stratus SAE-P410 Manual de usuario

Manuales populares de Sistema de elevación de otras marcas

morse

morse 82H-124 Manual de usuario

Braun

Braun NL955 Series Manual de usuario

haacon

haacon 1889.10 Manual de usuario

Protekt

Protekt AT 252 Manual de usuario

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Manual de usuario

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Manual de usuario

Genie

Genie Z-60/34 Manual de usuario

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Manual de usuario

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Manual de usuario

Custom Equipment

Custom Equipment Hy-Brid 3 Series Manual de programación

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Manual de programación

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Manual de programación

BERG

BERG BeNomic EasyLeaf Manual de usuario

Powermate

Powermate LiftGate LG-3 Manual de usuario

Snorkel

Snorkel TM12 Series Manual de usuario

Terberg

Terberg OMNIDEKA Manual de usuario

Harmar Mobility

Harmar Mobility AL625 Instrucciones de funcionamiento

Rotary

Rotary SPO16 Manual de usuario