StarVedia IP-901 Manual de usuario

User ’s Manual

Model No.: IP-901

Weatherproof Day/Night Network Camera

Hardware Installation & Web Configuration

PLEASE READ CAREFULLY AND SAVE

This manual contains important information about this product's operation.

If you are installing this product for others, you must leave this manual -or a

copy- with the end user.

R.901. 10408

Model IP901 Weatherproof Day/Night Network IP Camera

Table of Contents

LIST OF FIGURES AND TABLES

1. INTRODUCTION ......................................................................................................................... 6

2. HARDWARE DESCRIPTION AND QUICK INSTALLATION/USAGE................................ 8

2.1. MAJOR HARDWARE COMPONENTS....................................................................................... 8

2.2. QUICK INSTALLATION AND USAGE........................................................................................ 8

3. WEB CONFIGURATIONS ........................................................................................................12

.........................................................................................................4

3.1. INFORMATION......................................................................................................................13

3.2. VIDEO DISPLAY ................................................................................................................... 14

...................................................................................................................22

3.3. NETWORK ........................................................................................................................... 15

3.4. ADVANCED NETWORK ........................................................................................................ 17

3.5. VIDEO SETTINGS................................................................................................................. 18

3.6. 3GPP/RTSP SETTINGS .....................................................................................................20

.....................................................................................................24

3.7. MOTION DETECTION

3.8. NIGHT MODE CONTROL

3.9. DATE/TIME .......................................................................................................................... 25

3.10. ADMIN ................................................................................................................................. 26

3.11. UPGRADE............................................................................................................................ 27

............................................................................................................................31

3.12. REBOOT.............................................................................................................................. 29

3.13. SAFE MODE

3.14. SET TO FACTORY DEFAULT .................................................................................................32

4. FEATURES AND SPECIFICATIONS..................................................................................... 33

4.1. FEATURES ........................................................................................................................... 33

4.2. SPECIFICATIONS ................................................................................................................. 34

5. PACKAGE CONTENTS ........................................................................................................... 36

APPENDIX A. LIST OF TESTED NAT/ROUTER DEVICES........................................................ 37

APPENDIX B. MAXIMUM ALLOWED VIDEO USERS ................................................................ 38

APPENDIX C. PERFORMANCE INFORMATION......................................................................... 39

Model IP901 Weatherproof Day/Night Network IP Camera

APPENDIX D. TROUBLE SHOOTING ...........................................................................................40

APPENDIX E. 3GPP/ISMA OPERATION.......................................................................................42

APPENDIX F. THIRD PARTY AND EMBEDDED WEB PAGE INTEGRATION...........................43

Model IP901 Weatherproof Day/Night Network IP Camera

1. Introduction

The IP Network Camera is designed with the “user-friendly” idea deep in mind. The user

can install the IP Camera easily on his/her home network and then access the IP Camera

anywhere in the world through the accompanied video management software - CamView

without setting some complicated DNS name or changing the router’s settings. It’s just a plug &

play action.

With 3GPP/ISMA support, users can see the video of the IP camera on any 3G mobile

phone anywhere, anytime. The big difference is that there is software for downloading to the

mobile phone so that the fixed IP address is not needed for the IP camera. The video settings

including frame rate, resolution and bandwidth could be different for PC monitoring and mobile

viewing.

For outdoor surveillance and remote monitoring, the IP Camera provides the best image

quality in its class, and excellent performance. It also provides the best bandwidth efficiency,

offers 640x480 resolution, 30 fps frame rate, real MPEG4 image compression ability.

With the very low light sensitive sensor and IR led inside the IP66-rated water proof

housing, the IP Camera can work day and night and satisfy all security and indoor/outdoor

surveillance needs. With the motor controlled IR-cut filter, the day-time video quality is not

affected by the infrared light in the sun light. The IR-cut filter is automatically turned on during

dark light.

With the built-in Web server, the IP Cameras can also be managed from a standard web

browser on a Windows computer or a Macintosh.

The IP Camera provides motion detection function. Users can easily setup this function

and receive the notification with the snapshot images through email and/or ftp when some

motion events are detected.

The IP camera is ideal for securing small businesses, home offices and residences over a

local area network and/or the Internet.

The differences

It’s very easy to see the video of the IP Cam, you only need to key in the ID/Password of

the IP CAM any where in the world, you do not need to remember the IP address or domain

name or DDNS name or port number. And you do not need to modify the settings(like port

Model IP901 Weatherproof Day/Night Network IP Camera

mapping, fixed IP, DDNS, virtual server) of the NAT/router devices, it’s just a plug & play usage.

So, the differences are the followings:

♦Public IP address needed ? No

♦Dynamic DNS needed ? No

♦Port mapping in router? No

♦Virtual server in router ? No

♦UPnP support in router ? No

♦What’s needed ? ID and Password

Model IP901 Weatherproof Day/Night Network IP Camera

2. Hardware description and quick installation/usage

The IP CAM is designed to be very easy to install and use. First, let’s see the major

components of the IP CAM products.

2.1. Major hardware components.

The major components of the IP CAM products are listed below :

1. Lens – the focus of the lens is fixed, you do not need to spend time to adjust the focus, the

effective focus range is from 30cm to infinity.

2. IR LEDs – there are totally 40 IR LEDs that can provide approximately 30m distance night

vision.

3. EDS – this light detector can detect when the light is becoming dark and turn on the IR

LEDs automatically.

4. DC Power Connector – this is the place to plug in the power adaptor. The power needed for

this IP CAM is 12V/1.0A, please make sure you are using the correct power adaptor.

5. Network Cable Connector – this is the place to plug in the RJ45 Ethernet cable.

6. Reset button – this is the button to reset the IP CAM to default factory settings. You need to

press the reset button for more than 4 seconds to enable the reset function. Usually when

you forgot the administrator account, you will probably need to do this reset action to reset

to the default factory settings. Please refer to section 3.16 for more details.

IR LED Lens

EDS

Figure 2-1: Major components of the IP camera

Model IP901 Weatherproof Day/Night Network IP Camera

2.2. Quick installation and usage

There are only three things that you need to do to see the video from the IP CAM.

1. Connect the IP CAM to the home network.

2. Install the CamView software on the notebook/PC.

3. Key in the ID/password of the IP CAM(from the IP/Password sticker on the software

installation CD provided with the package) on the CamView, and then you can see the

video.

First, Connect the IP CAM to the home network

Please connect the IP CAM accessories to the IP CAM body correctly, including the bracket,

power adapter and Ethernet cable, as shown in Figure 2-2.And connect the other end of the

Ethernet cable to the home network router. Usually, this Ethernet cable is plugged into a home

NAT/router device, as shown in Figure 2-2. Since the default settings of the IP CAM use DHCP

function and very often there is a DHCP server on most of the Home network, the IP CAM

should be connected to the Internet immediately. It is recommended to connect IP camera

directly to NAT router but not through a hub.

Figure 2-2: IP CAM connection diagram.

Model IP901 Weatherproof Day/Night Network IP Camera

Second, Install the CamView software on the notebook/PC

Please insert the installation CD into the CD-ROM drive in your notebook or personal

computer (must be running Microsoft Windows OS). Execute the program

CamViewInstaller-xxx.exe on the disk. The program will pop-up some windows about the

installation options, please press the “next” button to proceed with the installation. After the

installation is complete, there will be a CamView icon on the desktop of your computer screen,

please execute this icon. The CamView program will run immediately.

Network IP Camera

Figure 2-3: The installation CD disk

Third, Use CamView program to see the video

Figure 2-5 is the running window of the CamView program. Note that the computer and IP

CAM MUST connected to the same networkAND under the same LAN, the IP CAM ID will be

displayed in the “Auto Search” list. You can double click the “Auto Search” to search all the

connected IP CAMs any time. The only thing left right now for seeing the video is to double

click the IP CAM ID item in the “Auto Search” list. For example, if the IP CAM ID is 123-456-789,

you can then double click the 123456789 item in the “Auto Search” list to view the video. A

window asking for password input will pop up. Please key-in the password in your ID/Password

sticker on the installation CD into this field and click “ok”. The video will then be displayed on

the window.

PASSWORD

Network IP Camera

Figure 2-4: The ID/Password card

Model IP901 Weatherproof Day/Night Network IP Camera

Notice :

1. You can modify this play-video password by entering into the web configuration pages.

Please refer to section 3.6 for more information.

2. You can also add the IP CAM into the CameraList in the CamView software to have more

convenient video display, please refer to the latter sections regarding to CamView utility

software for more functions.

Seeing the video in a remote location

After the IP CAM is installed and you can see the video from the CamView software in the

local network, it’s very easy to see the video in a remote location. All you need to do is add a

camera item in the “CameraList” folder of the CamView software, key in the IP CAM ID and

Password(from the IP/Password sticker on the software installation CD provided with the

package).And then double click this camera item. You will then see the Camera video

immediately. No further NAT/router setting modifications are needed.

Figure 2-5: Running window of CamView program

Model IP901 Weatherproof Day/Night Network IP Camera

Figure 2-6: Pop-up play-video password window

Tabla de contenidos

Otros manuales de Cámara de seguridad de StarVedia

StarVedia

StarVedia IC727FHD Manual de usuario

StarVedia

StarVedia IC201 Manual de usuario

StarVedia

StarVedia IC731z Manual de usuario

StarVedia

StarVedia IC722w Manual de usuario

StarVedia

StarVedia IC722z Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario