StarTech.com VS221HD2VGA Manual de usuario

Manual Revision: 10/17/2014

For the most up-to-date information, please visit: www.startech.com

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

VS221HD2VGA

VGA+HDMI® to VGA Audio/Video Converter

Switch

*actual product may vary from photos

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by

turning the equipment o and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction Manual

Table of Contents

Product Diagram ....................................................................................1

Front View .................................................................................................................................................... 1

Rear View...................................................................................................................................................... 1

Introduction............................................................................................2

Packaging Contents ................................................................................................................................. 2

System Requirements.............................................................................................................................. 2

Hardware Installation............................................................................2

Mode Selection and Switch Operation...............................................3

Manual Mode.............................................................................................................................................. 3

Priority Mode.............................................................................................................................................. 3

Automatic Mode........................................................................................................................................ 3

Technical Support ..................................................................................4

Warranty Information............................................................................4

Instruction Manual

Product Diagram

Front View

1. Input Selection Button

2. HDMI Audio/Video Input#1 Port

3. Active Port LED Indicators

4. 3.5mm Audio Input#2 Port

5. VGA Input #2 Port

6. EDID Selection

Rear View

1. Power Adapter Port

2. VGA Video Output Port

3. 3.5mm Audio Output Port

4. Mode Selection Switch

Instruction Manual

Introduction

Packaging Contents

• VGA+HDMI to VGA Converter Switch (VS221HD2VGA)

• Mounting Bracket Set

• Universal Power Adapter (NA/EU/UK)

• Instruction Manual

Note: The VS221HD2VGA will not display digitally encrypted

content from your HDMI-enabled Video Source Device.

System Requirements

• HDMI-enabled Source Device w/ HDMI Cable (i.e. computer)

• VGA-enabled Source Device w/ VGA Cable (i.e. computer)

• VGA-enabled Display Device w/ VGA Cable (i.e. monitor, projector)

• 2x 3.5mm audio cable (Optional for audio support)

Hardware Installation

1. Using an HDMI cable (not included), connect your HDMI-enabled Video Source

Device to the HDMI Audio/Video Input#1 Port on the VS221HD2VGA.

2. Using a VGA cable (not included), connect your VGA-enabled Video Source Device

to the VGA Audio/Video Input#2 Port on the VS221HD2VGA.

3. (Optional) If your VGA-enabled Video Source Device includes an audio output,

connect the audio source output on the device to the 3.5mm Audio Input#2 Port

on the VS221HD2VGA using a 3.5mm Audio Cable (not included).

4. Using a VGA cable (not included), connect your VGA-enabled Display Device to the

VS221HD2VGA.

5. (Optional) If your VGA-enabled Display Device supports audio, connect a 3.5mm

audio cable (not included) from the VS221HD2VGA to the Audio input port on your

Display Device.

Note: You can alternatively use a separate audio output device such as PC speakers,

or a Home Theatre system.

6. Using the included Power Adapter, connect the Power Adapter Port on the

VS221HD2VGA to an available power outlet.

7. Turn on the VGA-enabled Display Device, followed by each of the HDMI & VGA-

enabled Video Source Devices (HDMI/VGA).

Instruction Manual

Mode Selection and Switch Operation

Change the Mode Selection Switch to choose your desired operation mode.

Instructions and descriptions for each Operation mode are listed below:

Manual Mode

Manual Mode enables you to switch between video sources with push button operation.

1. Set the Mode Selection Switch to “Manual Switch” to place the VS221HD2VGA into

Manual Mode.

2. Press the Input Selection Button to toggle between each Video Source Device. The

Active Port LED Indicator will light as video sources are switched, indicating which

port is selected.

Priority Mode

Priority Mode enables you to select a prioritized Video Input Device that

will automatically be selected should that device be turned on.

1. Set the Mode Selection Switch to “HDMI Priority” or “VGA Priority” to Place the

VS221HD2VGA into your choice Video Source Device priority.

2. Your HDMI or VGA Video Source Device (depending on your selection), will now

automatically be displayed on your VGA-enabled Video Display Device while it is

turned on. Turning o the device will automatically switch to the remaining device.

Set EDID Conguration

The VS221HD2VGA supports EDID pass-through, EDID copy and EDID emulation.

EDID is a communication structure used by your video display device to communicate

available display settings to your video source devices ensuring optimal performance.

You can set your desired EDID mode using the EDID dial on the side of the

VS221HD2VGA.

Instruction Manual

EDID Pass-Through

Using EDID pass-through, the video source devices will communicate EDID settings to your

video display device as normal. This conguration is ideal if your video display is capable of

maintaining EDID communication. Follow the below steps to set up EDID pass-through.

1. Using a small at-headed screw driver (not included), set the EDID dial to position 0

EDID Copy

Using EDID copy, the VS221HD2VGA will save the EDID settings of your video display locally

and communicate these settings to your video source devices. This conguration is ideal if

your video source devices and your video display intermittently experience issues due to

EDID communication, such as signal loss. Follow the steps below to set up EDID copy.

1. Using a small at-headed screw driver (not included), set the EDID dial to position 1.

2. Press and hold the input selection button, until the active port LED ashes green

(about 3 seconds).

The active port LED will now alternate between green and red, and return to normal

indicating that EDID Copy is now active.

Factory Default Setting

If the VS221HD2VGA is encountering an operational problem, resetting the device back to

factory default settings may resolve your issue. Please follow the below steps to restore the

VS221HD2VGA to factory default settings.

1. Using a small at-headed screw driver (not included), set the EDID Selector to Position 1.

2. Press and hold the input selection button until the active port LED ashes RED

(about 6 seconds).

The active port LED will now alternate between green and red, and return to normal

indicating that the device has now been reset to factory default settings.

EDID Emulation

Using EDID emulation the VS221HD2VGA will communicate general EDID settings for your

desired resolution. This conguration is ideal if your video display device does not support

EDID. Follow the steps below to set up EDID emulation.

1. Review the “Complete Available EDID Settings Table” to determine your EDID dial position

based on the resolution of your video source devices.

2. Using a small at-headed screw driver (not included), set the EDID dial to your desired

position.

Instruction Manual

Complete Available EDID Settings Table

EDID Dial Position Resolution Settings

0 EDID Pass-Through

1 EDID Copy

2 1024 x 768

3 1280 x 720

4 1280 x 1024

5 1366 x 768

6 1440 x 900

7 1600 x 900

8 1600 x 1200

9 1660 x 1050

A 1920 x 1080

B 1920 x 1200

C Not Active

D 2048 x 1152

E Not Active

F Not Active

Instruction Manual

Specications

Video Input Signals 1 x HDMI

1 x VGA

Video Output Signals 1 x VGA

Maximum Video Resolution 1920x1200 (WUXGA)

Audio Support 7.1 Digital Audio (HDMI)

3.5mm Stereo Audio (VGA)

Supported Switch Modes Priority, Manual

Instruction Manual

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to

provide industry-leading solutions. If you ever need help with your product, visit

www.startech.com/support and access our comprehensive selection of online tools,

documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two year warranty.

In addition, StarTech.com warrants its products against defects in materials

and workmanship for the periods noted, following the initial date of purchase.

During this period, the products may be returned for repair, or replacement with

equivalent products at our discretion. The warranty covers parts and labor costs only.

StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their

ocers, directors, employees or agents) for any damages (whether direct or indirect,

special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,

or any pecuniary loss, arising out of or related to the use of the product exceed the

actual price paid for the product. Some states do not allow the exclusion or limitation

of incidental or consequential damages. If such laws apply, the limitations or exclusions

contained in this statement may not apply to you.

Tabla de contenidos

Otros manuales de Cambiar de StarTech.com

StarTech.com

StarTech.com VS410DVIR Manual de usuario

StarTech.com

StarTech.com MSTMDP123DP Manual de usuario

StarTech.com

StarTech.com SV841HDI Manual de usuario

StarTech.com

StarTech.com SV231DPDDUA Manual de usuario

StarTech.com

StarTech.com SV231HDMIUA Manual de usuario

StarTech.com

StarTech.com V231DVIUDDM Manual de usuario

StarTech.com

StarTech.com SV431DPU3A2 Manual de usuario

StarTech.com

StarTech.com SV231DVGAU2A Manual de usuario

StarTech.com

StarTech.com POEINJ4G Manual de usuario

StarTech.com

StarTech.com HB30C5A2CSC Manual de usuario

StarTech.com

StarTech.com IES81GPOEW Manual de usuario

StarTech.com

StarTech.com ST4200USBM Manual de usuario

StarTech.com

StarTech.com VS421HDDP Manual de usuario

StarTech.com

StarTech.com ICUSB2328 Manual de usuario

StarTech.com

StarTech.com 8STICUSB23216FD Manual de usuario

StarTech.com

StarTech.com SV231DPDDUA2 Manual de usuario

StarTech.com

StarTech.com 8STST7300USBME Manual de usuario

StarTech.com

StarTech.com ICUSB23208FD Manual de usuario

StarTech.com

StarTech.com SV231DD2DUA Manual de usuario

StarTech.com

StarTech.com 8STSV431DPDDUA2 Manual de usuario

StarTech.com

StarTech.com SV831DUSBA Manual de usuario

StarTech.com

StarTech.com P2DD46A2-KVM-SWITCH Manual de usuario

StarTech.com

StarTech.com ST222MX Manual de usuario

StarTech.com

StarTech.com SV231DVIDDU Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario