StarTech.com SV431DPUA2 Manual de usuario
1
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Compliance Statements
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du
Canada.
CAN ICES-3 (B)/NMB-3(B)
Use of Trademarks, Registered Trademarks, and other
Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and
other protected names and/or symbols of third-party companies not related in
any way to StarTech.com. Where they occur these references are for illustrative
purposes only and do not represent an endorsement of a product or service
by StarTech.com, or an endorsement of the product(s) to which this manual
applies by the third-party company in question. Regardless of any direct
acknowledgement elsewhere in the body of this document, StarTech.com
hereby acknowledges that all trademarks, registered trademarks, service marks,
and other protected names and/or symbols contained in this manual and
related documents are the property of their respective holders.
2
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Safety Statements
Safety Measures
• Wiring terminations should not be made with the product and/or electric
lines under power.
• Cables (including power and charging cables) should be placed and routed
to avoid creating electric, tripping or safety hazards.
Mesures de sécurité
• Les terminaisons de câblâge ne doivent pas être eectuées lorsque le produit
et/ou les câbles électriques sont sous tension.
• Les câbles (y compris les câbles d’alimentation et de chargement) doivent
être placés et acheminés de façon à éviter tout risque électrique, de chute ou
de sécurité
安全対策
• 電源が入っている状態の製品または電線の終端処理を行わないでくださ
い。
• ケーブル（電源ケーブルと充電ケーブルを含む）は、適切な配置と引き回し
を行い、電気障害やつまづきの危険性など、安全上のリスクを回避するよう
にしてください。
Misure di sicurezza
• I terminiali dei li elettrici non devono essere realizzate con il prodotto e/o le
linee elettriche sotto tensione.
• I cavi (inclusi i cavi di alimentazione e di ricarica) devono essere posizionati
e stesi in modo da evitare pericoli di inciampo, rischi di scosse elettriche o
pericoli per la sicurezza.
Säkerhetsåtgärder
• Montering av kabelavslutningar får inte göras när produkten och/eller
elledningarna är strömförda.
• Kablar (inklusive elkablar och laddningskablar) ska dras och placeras på så
sätt att risk för snubblingsolyckor och andra olyckor kan undvikas.
3
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Table of Contents
Compliance Statements........................................................................1
Safety Statements..................................................................................2
Product Diagram....................................................................................5
Front View.................................................................................................................................................... 5
Rear View...................................................................................................................................................... 6
Product Information..............................................................................7
Package contents...................................................................................................................................... 7
Requirements ............................................................................................................................................. 7
Installation ..............................................................................................8
Setting Up a PC .......................................................................................................................................... 8
Connecting a Console to the KVM Switch........................................................................................8
Connecting a Computer to the KVM Switch ................................................................................... 9
Operation ................................................................................................10
Selecting a Computer.............................................................................................................................. 10
Starting an Auto Scan.............................................................................................................................. 10
Setting Scan Time Duration................................................................................................................... 11
Using hotkey Commands......................................................................12
Disabling hotkey Commands ............................................................................................................... 12
Selecting a Computer.............................................................................................................................. 13
Starting an Auto Scan.............................................................................................................................. 13
Setting Scan Time Duration................................................................................................................... 13
Scanning Computers Manually............................................................................................................ 13
4
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Disabling the Audio Stick Feature....................................................................................................... 14
Using an Alternative hotkey Command............................................................................................ 15
About the LED indicators......................................................................15
Troubleshooting.....................................................................................16
5
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Diagram
Front View
1Port Selection/Link LEDs
2Power LED
3Port Select Buttons
2
3
1
6
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Rear View
1Console DisplayPort Port 6PC 4 Ports
2Power Adapter Port 7PC 3 Ports
3Console Speaker and Mic
Ports
8PC 2 Ports
4USB Keyboard and Mouse
Ports
9PC 1 Ports
5Console USB Ports
234567 8 9
1
7
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Information
Package contents
• KVM Switch x 1
• Foot Pads x 4
• Universal Power Adapter (NA/JP, EU, UK, ANZ) x 1
• Quick-Start Guide x 1
Requirements
Requirements are subject to change. For the latest
requirements, please visit www.StarTech.com/SV431DPUA2.
Cables
• USB-A to USB-cable or USB-C to USB-B cable’
• 3.5 mm audio cables
PC
• Computer system or video card enabled with DisplayPort
• Computer system enabled with USB
Components
• Display device (for example, monitor, projector, TV, and so
on) enabled with DisplayPort
• Standard wired or wireless USB keyboard
• Standard wired or wireless USB mouse
8
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Installation
Setting Up a PC
The following setup changes are required for PC users and
aren’t necessary if you’re using a mac.
1. In Standard CMOS, set Halt on Error to All But Keyboard.
2. In PNP and PCI Setup, set PNP OS Installed to Yes .
3. In PNP and PCI Setup, set USB IRQ to Enabled.
Connecting a Console to the KVM Switch
1. Turn o your computer and any devices or peripherals that
are connected to it (for example, printers, external hard
drives, and so on).
2. Connect a monitor or display to the console DisplayPort
port.
3. Do one of the following:
• Connect a keyboard and a mouse to the USB keyboard and
mouse ports.
• If you’re using a combination wireless keyboard and
mouse, connect the wireless receiver to the keyboard port.
4. If necessary, do any of the following:
• Connect speakers to the console audio speaker port.
• Connect a microphone to the console mic port.
• Connect USB peripherals to the USB hub ports.
9
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Connecting a Computer to the KVM Switch
You can connect up to four computers to the KVM switch.
1. Turn o the computers that you want to connect to the KVM
switch and any devices or peripherals that are connected to
the computers (for example, printers, external hard drives,
and so on).
2. Connect a DisplayPort video cable to the DisplayPort port on
your computer and to one of the PC DisplayPort ports on the
KVM switch.
3. Connect a USB cable to the USB port on the computer and to
the PC USB port on the KVM switch
4. If you’re using audio, connect speakers and/or a microphone
to the PC audio speaker and mic ports on the KVM switch.
5. To connect additional computers, repeat steps 1 to 4.
6. If you want to share USB peripherals between connected
computers or devices, connect the peripherals to the USB
hub ports on the KVM switch.
7. Connect the universal power adapter to a power source and
to the power adapter port on the KVM switch. The power
LED should illuminate.
8. Turn on any devices or peripherals that are connected to
the computer, and then turn on the connected computer.
Wait for the computer to nishing loading and then test the
functionality of the keyboard and mouse of the connected
computer.
Otros manuales para SV431DPUA2
2
Tabla de contenidos
Otros manuales de Cambiar de StarTech.com
StarTech.com
StarTech.com 8ST35BAYUSB3S4 Manual de usuario
StarTech.com
StarTech.com SV231DPDDUA2 Manual de usuario
StarTech.com
StarTech.com 5G4AIBS-USB-HUB-EU Manual de usuario
StarTech.com
StarTech.com ICUSB2322I Manual de usuario
StarTech.com
StarTech.com ST3300U3S Manual del sistema
StarTech.com
StarTech.com SV431USBAE Manual de usuario
StarTech.com
StarTech.com SV431HDU3A Manual de usuario
StarTech.com
StarTech.com IES51000POE Manual de usuario
StarTech.com
StarTech.com MSTCDP122DP Manual de usuario
StarTech.com
StarTech.com MSTCDP123DP Manual de usuario
StarTech.com
StarTech.com USB2HDCAPS Manual de usuario
StarTech.com
StarTech.com ST4300USBMS Manual de usuario
StarTech.com
StarTech.com HB30C4AIB Manual de usuario
StarTech.com
StarTech.com ST121HDBTSC Manual de usuario
StarTech.com
StarTech.com 5port Manual de usuario
StarTech.com
StarTech.com IES61002POE Manual de usuario
StarTech.com
StarTech.com MSTMDP123DP Manual de usuario
StarTech.com
StarTech.com SV431DDVDUA Manual de usuario
StarTech.com
StarTech.com IES5102 Manual de usuario
StarTech.com
StarTech.com SV431HU34K6 Manual de usuario
