StarTech.com SV231UAF Manual de usuario

VGA KVM Switch

2-Port VGA, USB KVM Switch

SV231UAF

Instruction Manual

Manual Revision:05/09/2011

For the most up-to-date information, please visit www.startech.com

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of Trademarks, Registered Trademarks, and other Protected Names and

Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes

only and do not represent an endorsement of a product or service by StarTech.

com, or an endorsement of the product(s) to which this manual applies by the

third-party company in question. Regardless of any direct acknowledgement

elsewhere in the body of this document, StarTech.com hereby acknowledges that

all trademarks, registered trademarks, service marks, and other protected names

and/or symbols contained in this manual and related documents are the property

of their respective holders.

Table of Contents

Introduction .............................................................. 1

Packaging Contents............................................................. 1

System Requirements ......................................................... 1

Front View ............................................................................ 2

Rear View ............................................................................ 2

Installation ................................................................ 3

Hardware Installation ........................................................... 3

Software Installation ............................................................ 3

How to Use ............................................................... 4

Hotkey Switching ................................................................. 4

KMDS Software ................................................................... 4

Software Notes .................................................................... 5

Troubleshooting ....................................................... 5

Speciﬁcations ........................................................... 7

Technical Support .................................................... 8

Warranty Information ............................................... 8

Introduction

The StarTech.com SV231UAF allows a single USB keyboard, mouse and

monitor to be switched to access up to two computers. The device offers

a compact design saving desk space, in addition to saving the cost of

purchasing separate peripherals for each computer. The Picture-in-Picture

function allows you to look at the other connected system while still working

on the one in focus, while the data link feature lets you perform a simple

drag and drop data transfer between the two computers. Backed by a

StarTech.com 1-year warranty and free lifetime technical support.

Packaging Contents

• 1 x KVM switch

• 2 x PC Connecting Cable (4 ft / 6 ft)

• 1 x Instruction Manual

System Requirements

• VGA enabled computer system

• USB enabled computer system with available USB port

• VGA enabled display device (e.g. monitor, projector, TV, etc.)

• Standard 104-key USB keyboard

• Standard 3-button USB mouse

• Optional Software: Microsoft® Windows® XP/Vista/7 (32/64-bit)

Front View

Rear View

Installation

Hardware Installation

1. Connect a VGA display device to the VGA connector (output) on the

front panel of the KVM switch.

2. Connect a USB keyboard and a USB mouse into the dedicated USB

keyboard and mouse ports on the KVM switch. If using audio, also

connect speakers/headphones with 3.5mm mini-jack plugs.

3. Using the included KVM cables, connect the black-colored VGA

connector into the PC1 and PC2 connectors. If using audio, also

connect the 3.5mm mini-jack plug into the respective audio connector.

4. Connect the opposite end of the KVM cable into the appropriate

connectors on the computer systems.

5. Power on the computer connected to PC1 ﬁrst and wait for it to fully

boot.

6. Switch to PC2 and then power on that computer.

7. Both computers should now be functional and you should be able to

switch between them freely.

Software Installation

1. When connected to a Windows-based PC, this KVM switch will create

additional removable drives that are accessible via “My Computer”. In

the “KMDS” drive, run the setup.exe ﬁle.

2. Once the Installation Wizard starts, follow the prompts to complete

installation.

3. An icon should be visible in the System Tray (near system clock) to

access the software options.

How to Use

Hotkey Switching

A Hotkey command is a short keyboard sequence for selecting a computer

connected to the KVM switch. A hotkey sequence consists of two

keystrokes (successively within 0.2 seconds). A built-in tone generator

creates a high-pitched beep for a correct hotkey command.

To switch from the currently selected computer to the next computer,

including audio:

[Scroll Lk] + [Scroll Lk]

To switch from the currently selected computer to the next computer, but

not switch the audio:

[Caps Lk] + [Caps Lk]

KMDS Software

The KMDS icon in the System Tray is used to access various additional

features by right-clicking the icon.

Switch KVM

Switch computer control, video and audio to the next computer.

Switch Audio

Switch only audio to the next computer, while control and video remain

on the current computer.

KVM PIP

Activate the Picture-In-Picture window to view a scaled-down video feed

of the next computer system. The primary purpose is for performing a

ﬁle transfer to the next computer system by dragging and dropping ﬁles

into the PIP window.

Software Notes

• File transfers and text copy/paste operations through the KMDS

software, should only be performed if both computer operating systems

are set to the same language version.

• File transfers are only supported to the Windows Desktop. Identical

ﬁle names on the desktop will be automatically overwritten without

notiﬁcation. Caution is recommended when transferring ﬁles.

• Picture in Picture mode (PIP) is not suitable for watching multimedia

ﬁles.

• Do not change the computer screen resolution while PIP mode is active.

• Do not unplug the KVM cables or attempt port switching while a ﬁle

transfer is in progress. Exit the KMDS software before disconnecting the

KVM from a running computer system.

• While using the KMDS software, it is recommended that users have full

Administrator access.

• If any errors are encountered during use of the KMDS software, exit the

software and reconnect the USB and VGA connectors and restart the

KMDS software.

Troubleshooting

Problem: Unable to set proper video resolution for the connected display.

Solutions:

• This KVM switch will store the EDID information from the last

connected display, so if replaced with a non-EDID compliant display,

the connected computers will still receive the EDID from the previous

display. This may prevent you from selecting the proper video

resolution for the new display. An EDID compliant display needs to be

connected to the KVM switch to override the stored EDID information.

• Check the VGA cable connection between the KVM switch and the

VGA display and/or replace cable (with shorter cable, if applicable).

Problem: Any of the following symptoms are found:

• Switching is slow or unresponsive

• Mouse or keyboard is slow or unresponsive

• File transfers are slow or unresponsive

• Picture in Picture window only shows grey box

Solutions: The KVM switch needs to be reset.

Method 1:

1. Switch to PC1 and close/exit the KMDS software.

2. Switch to PC2 and close/exit the KMDS software.

3. Disconnect all of the cables from the KVM switch to PC2.

4. Disconnect all of the cables from the KVM switch to PC1.

5. Wait for 20 seconds.

6. Reconnect all of the cables from the KVM switch to PC1, then PC2.

7. Switch to PC1, if not already, and restart the KMDS software.

8. Switch to PC2 and restart the KMDS software.

Method 2:

1. Shut down PC2.

2. Shut down PC1.

3. Disconnect all of the cables from the KVM switch to PC2.

4. Disconnect all of the cables from the KVM switch to PC1.

5. Wait for 20 seconds.

6. Reconnect all of the cables from the KVM switch to PC1, then PC2.

7. Power on PC1 and wait for it to fully boot.

8. Power on PC2 and wait for it to fully boot.

9. Restart the KMDS software on both computers, if not already running.

Specications

Number of Ports 2

Computer Connectors

(per port)

1 x DE-15 VGA male

1 x USB type A male

1 x 3.5mm Audio mini-jack male

(via included KVM cable)

Console Connectors

(per port)

1 x DE-15 VGA female

2 x USB type A female

1 x 3.5mm Audio mini-jack

Maximum Video Resolution 2048 x 1536

DDC Support Yes (DDC, DDC2, DDC2B)

Audio Support Yes

On Screen Display No

Cascadable No

Switching Modes Push-button, Hotkey, Software

Power Adapter None

Enclosure Material Plastic

Operating Temperature 0°C ~ 40°C (32°F ~ 104°F)

Storage Temperature -10°C ~ 80°C (14°F ~ 176°F)

Humidity 0 ~ 90% RH

Dimensions (WxHxD) 110.0mm x 27.0mm x 65.0mm

Weight 100 g

Tabla de contenidos

Otros manuales de Cambiar de StarTech.com

StarTech.com

StarTech.com Presentation Jockey Manual

StarTech.com

StarTech.com P2DD46A2-KVM-SWITCH Manual de usuario

StarTech.com

StarTech.com ST4300USBMS Manual de usuario

StarTech.com

StarTech.com SV211DPUA4K Manual de usuario

StarTech.com

StarTech.com SV231DPUA Manual de usuario

StarTech.com

StarTech.com VS410DVIR Manual de usuario

StarTech.com

StarTech.com ICUSB2324 Manual de usuario

StarTech.com

StarTech.com SV431DD2DUA Manual de usuario

StarTech.com

StarTech.com SV831DUSBUK Manual de usuario

StarTech.com

StarTech.com HB30C3APDW Manual de usuario

StarTech.com

StarTech.com 8STSV211USB Manual de usuario

StarTech.com

StarTech.com ST4202USB Manual de usuario

StarTech.com

StarTech.com 8STIES81GPOEW Manual de usuario

StarTech.com

StarTech.com SV431DD2DU3A Manual de usuario

StarTech.com

StarTech.com SV211KUSB Manual de usuario

StarTech.com

StarTech.com SV1107IPEXT Manual de usuario

StarTech.com

StarTech.com SV431DPDDUA2 Manual de usuario

StarTech.com

StarTech.com ST4300USB3 Manual de usuario

StarTech.com

StarTech.com SV221MICRA Manual

StarTech.com

StarTech.com IES101002SFP Manual de usuario

StarTech.com

StarTech.com 5G7AIBS-USB-HUB-EU Manual de usuario

StarTech.com

StarTech.com HB20A7AME Manual de usuario

StarTech.com

StarTech.com ST7300USBME Manual de usuario

StarTech.com

StarTech.com POEINJ2GI Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario