StarTech.com INFOSAFE SAT2510BU2 Manual de usuario

InfoSafe Mobile Drive Enclosure

SAT2510U2

SAT2510BU2

IDE2510U2

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turn-

ing the equipment off and on, the user is encouraged to try to correct the interference by one

or more of the following measures:

Reorient or relocate the receiving antenna.•

Increase the separation between the equipment and receiver.•

Connect the equipment into an outlet on a circuit different from that to which the receiver•

is connected.

Consult the dealer or an experienced radio/TV technician for help.•

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected

names and/or symbols of third-party companies not related in any way to StarTech.com.

Where they occur these references are for illustrative purposes only and do not represent an

endorsement of a product or service by StarTech.com, or an endorsement of the product(s)

to which this manual applies by the third-party company in question. Regardless of any direct

acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowl-

edges that all trademarks, registered trademarks, service marks, and other protected names

and/or symbols contained in this manual and related documents are the property of their

respective holders.

Instruction Manual

Table of Contents

Introduction ................................................................................... 1

Features ......................................................................................1

System Requirements .................................................................1

Package contents ........................................................................1

Installation and Usage .................................................................. 2

Installing a hard drive in the Enclosure........................................2

Installing Drivers (Windows 98SE) ..............................................4

Connecting the Hard Drive ..........................................................4

Powering the Drive Enclosure .................................................5

LED Indicator...........................................................................5

Disconnecting the Hard Drive......................................................5

Windows 98SE ........................................................................5

Windows ME/2000/XP.............................................................5

Mac OS 8+ ..............................................................................6

Speciﬁcations ................................................................................ 7

Technical Support........................................................................8

Warranty Information ...................................................................8

Instruction Manual

Introduction

Thank you for purchasing a StarTech.com InfoSafe external hard drive

enclosure. This product allows you to turn virtually any standard 2.5”

notebook computer hard drive into a portable storage solution. The

perfect solution for storing multimedia, digital imaging, audio, and other

demanding applications, this product can be installed easily to suit virtu-

ally any storage necessity.

Features

USB 2.0 compatible•

Backward compatible with USB 1.1•

Requires no external power source•

LED indicates Activity and Power status•

System Requirements

An IBM-compatible PC, or Mac with an available USB port with one of the

following operating systems installed:

Windows® 98SE/ME/2000/XP/2003 Server/Vista™, Mac OS 8 or higher

Package contents

This package should contain:

1 x InfoSafe Mobile Drive Enclosure•

1 x USB 2.0 (Male) to USB Mini B (Male) / Y cable•

1 x Installation CD•

1 x Protective pouch•

1 x Instruction Manual•

1 x Screw kit•

Instruction Manual

Installation and Usage

Installing a hard drive in the Enclosure

CAUTION:Use caution when installing a hard drive in the enclosure.

Excessive shock or force could damage the drive and/or the enclosure,

resulting in data loss.

Always ensure that you are properly grounded when handling a hard

drive or the enclosure tray, since electronic components can be damaged

by static electricity. If an anti-static mat or similar product is not available,

ground yourself by touching a computer case or other metal surface for

several seconds before handling any components.

Set the hard drive to function in Master mode by adjusting the1.

necessary jumpers, according to the drive manufacturer’s instruction.

Using the included screwdriver, remove the screws fastening the top2.

panel to the enclosure.

LED

Indicator

Mini USB

Connector

Top Panel

Bottom Panel

Instruction Manual

Attach the 2.5” hard drive to the interface connector (located on inverse3.

of top panel), ensuring a snug connection. Do not use excessive force,

to avoid damaging the drive and the the enclosure.

Insert the top panel and attached hard drive into the bottom panel.4.

Re-fasten the screws that were removed in step 2.5.

Instruction Manual

Installing Drivers (Windows 98SE)

Note: Windows ME/2000/XP/2003 Server and supported versions of Mac

OS all support removable hard drives without additional software. As

such, please ensure you have the most current updates installed. Com-

puters running Windows 98SE need to install support for USB removable

mass storage devices prior to using the enclosure:

Insert the installation CD into your computer’s CD-ROM or compatible1.

optical drive.

Double click the2. My Computer icon on the desktop. Double click the

icon for the computer’s CD-ROM drive.

For SATA drives3. : Open the x:\STORAGE\USB 2.0\ST2026SP folder,

where x:\ denotes the drive letter assigned to the CD/DVD-ROM drive.

Double-click on the SPIF215_98_Installer icon to launch installation.

For IDE drives: Open the x:\STORAGE\USB 2.0\GL811E folder,

where x:\ denotes the drive letter assigned to the CD/DVD-ROM drive.

Double-click on the Setup.exe ﬁle, to launch installation.

Follow all prompts to complete installation.

Once the software installation has completed, connect the enclosure4.

to the host computer, using the included USB 2.0 (Male) to USB Mini B

(Male) cable. Windows will notify you that new hardware has been

found and installed.

Connecting the Hard Drive

Once the enclosure has been attached to a computer, and the necessary

software has been installed, the drive will be accessible as though it were

installed within the system.

Prior to using the drive, it will need to be formatted according to your op-

erating system requirements. To format your newly attached hard drive,

or create partitions, please consult the documentation that accompanied

your operating system at the time of purchase.

Instruction Manual

Powering the Drive Enclosure

The hard drive enclosure requires no external power supply, as it is ca-

pable of receiving enough power (5V/500mA) from the USB Bus to which

it is connected. Please ensure that both USB type A connectors are

inserted into available ports on the host computer.

LED Indicator

The hard drive enclosure offers an LED indicator, to enable you to moni-

tor drive activity. When the enclosure is powered, the LED will illuminate

and remain green. While the hard drive is being accessed, however, the

LED will change from green to red. Do not remove the enclosure from

the host computer while the LED is red, as it could damage the drive or

the enclosure, resulting in data loss.

Disconnecting the Hard Drive

Windows 98SE

The hard drive enclosure can be removed when the activity LED is

green. To do so, simply unplug the USB cable connecting the enclosure

to the host computer.

Windows ME/2000/XP

Right click on the removable storage icon, located in the task bar.1.

2. Windows XP: When the Safely Remove Hardware message

appears, click on it with the left mouse button.

Windows ME/2000: When the Unplug or eject hardware message

appears, click on it with the left mouse button.

You will be asked to select the device you wish to disconnect. Please3.

highlight the drive listing, and click on OK

On the screen that follows, click on4. Stop.

Wait for the message indicating that it is now safe to remove the5.

device. Please note:

Instruction Manual

Removing the connected drive prior to receiving notiﬁcation that it is safe

to do so, could result in losing or corrupting data stored on the drive.

Once the Safe to Remove Hardware message appears, please discon-

nect the enclosure from the computer by removing the USB connection.

Mac OS 8+

To safely disconnect the attached drive from the host computer, close any

windows listing the contents of the removable drive. Once all windows

are closed, click on the USB storage icon on the desktop, and drag it to

the Trash Can icon on the desktop. Allow 5 seconds before physically

removing the enclosure/drive from the computer.

Instruction Manual

Specications

Hard Drive support

IDE2510U2: 2.5” IDE (ATA 100)

SAT2510U2: 2.5” SATA / SATA II

SAT2510BU2: 2.5” SATA / SATA II

Connectors USB mini B Female

Drive Capacity support 120GB, 5400 RPM

Maximum Data Transfer Rate 480Mb/s

Chipset IDE: Genesis GL-811E

SATA: Sunplus SPIF-215A

Operating System support Windows® 98SE/ME/2000/XP/Vista™

Mac OS 8 or Higher

Dimensions 120 x 75 x 10 mm (4.72 x 2.95 x 0.39”)

Weight 62.1g (2.19 oz.)

Regulatory Certiﬁcations FCC, CE, ROHS

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Recinto de StarTech.com

StarTech.com

StarTech.com SAT3540ER2 Manual de usuario

StarTech.com

StarTech.com S2510BU3PW Manual de usuario

StarTech.com

StarTech.com INFOSAFE SAT3540ER Manual de usuario

StarTech.com

StarTech.com SATBP125VP Manual de usuario

StarTech.com

StarTech.com RK616WALM Manual de usuario

StarTech.com

StarTech.com RK1219WALHM Manual de usuario

StarTech.com

StarTech.com UNI251BMU33 Manual de usuario

StarTech.com

StarTech.com S251BMU313 Manual de usuario

StarTech.com

StarTech.com SAT3510BU3 Manual de usuario

StarTech.com

StarTech.com SAT2510U2REM Manual de usuario

StarTech.com

StarTech.com RK1219WALH Manual de usuario

StarTech.com

StarTech.com S251BU31315 Manual de usuario

StarTech.com

StarTech.com SECTBLTPOS2 Manual de usuario

StarTech.com

StarTech.com SMS1BMU313 Manual de usuario

StarTech.com

StarTech.com RK1224WALHM Manual de usuario

StarTech.com

StarTech.com S2510U33RUSM Manual del sistema

StarTech.com

StarTech.com SM2E1BMU31C Manual de usuario

StarTech.com

StarTech.com S2510U33RUSM Manual de usuario

StarTech.com

StarTech.com SM21BMU31C3 Manual de usuario

StarTech.com

StarTech.com USB2SLSATINT Manual de usuario

StarTech.com

StarTech.com 2TBT3-PCIE-ENCLOSURE Manual de usuario

StarTech.com

StarTech.com SAT3540U3ER Manual del sistema

StarTech.com

StarTech.com SM2NGFFMBU33 Manual de usuario

StarTech.com

StarTech.com InfoSafe SAT2510BU2B Manual de usuario

Manuales populares de Recinto de otras marcas

SilentiumPC

SilentiumPC Armis AR5 Manual

Pulsar

Pulsar 17/TRP80/DSPR Manual de usuario

Thermaltake

Thermaltake V150 TG Manual de usuario

MSI

MSI MPG SEKIRA 500X Manual de usuario

Antec

Antec Dark fleet DF-10 Manual de usuario

Nexans

Nexans WTC05 Manual de usuario

Peavey

Peavey DS 1502 Manual de usuario

D-Link

D-Link ShareCenter Pro DNS-1550-04 Manual de usuario

Rosewill

Rosewill RX82-U(JBOD) Manual de usuario

QNAP

QNAP SAS JBOD CLI 1.0 Manual de usuario

GAMDIAS

GAMDIAS Talos P1 Manual de usuario

Auvs

Auvs KR615 Manual de usuario

Digitus

Digitus DA-71114 Manual de usuario

CommScope

CommScope FDH 3000 Manual de usuario

FS FHD-FWME4 Manual de usuario

JBL

JBL CS1215T Manual de usuario

Pulsar

Pulsar ARAD-S4 Manual de usuario

Pulsar

Pulsar AWO454 Manual de usuario