Stanley TLM65 Manual de usuario

STANLEY TLM65 1

Table of Contents

Instrument Set-up - - - - - - - - - - - - - - - - - - - - - - - - - -2

Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -2

Display - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -2

Insert batteries - - - - - - - - - - - - - - - - - - - - - - - - - - - - -2

Operations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -3

Switching ON/OFF- - - - - - - - - - - - - - - - - - - - - - - - - - -3

Message Codes - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3

Unit setting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3

Measuring Functions - - - - - - - - - - - - - - - - - - - - - - -4

Measuring single distance - - - - - - - - - - - - - - - - - - - - -4

Permanent measuring - - - - - - - - - - - - - - - - - - - - - - - -4

Area- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4

Volume- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -5

Technical Data- - - - - - - - - - - - - - - - - - - - - - - - - - - - -6

Message Codes- - - - - - - - - - - - - - - - - - - - - - - - - - - -6

Care - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -6

Disposal - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -6

Warranty- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -6

Safety Instructions - - - - - - - - - - - - - - - - - - - - - - - - -7

Symbols used - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -7

Permitted use - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7

Prohibited use- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -7

Hazards in use - - - - - - - - - - - - - - - - - - - - - - - - - - - - -7

Limits of use - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -7

Areas of responsibility - - - - - - - - - - - - - - - - - - - - - - - -8

Electromagnetic Compatibility (EMC) - - - - - - - - - - - - -8

FCC statement (applicable in U.S.) - - - - - - - - - - - - - - -8

Laser classification - - - - - - - - - - - - - - - - - - - - - - - - - -9

Labelling- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -9

STANLEY TLM65

Instrument Set-up

Overview

The safety instructions and the user manual should be

read through carefully before the product is used for the

first time.

The person responsible for the product must ensure that

all users understand these directions and adhere to them.

Display

On / Measure /

Continuous

measuring

Area / Volume /

Units

Display

Insert batteries

Battery

Units

Area /

Volume

Main line

Info

Change batteries

when battery

symbol is

flashing.

STANLEY TLM65 3

Operations

Switching ON/OFF Message Codes

OFF

Device is turned

OFF.

4 sec

If no key is

pressed for

120 sec, the

device

switches off

automatically.

If the info icon appears with a number, observe the

instructions in section "Message Codes".

Example:

Unit setting

0.000 m

0‘00‘‘ 1/16

0 1/16 in

Switch between the

following units:

1 sec

STANLEY TLM65

Measuring Functions

Measuring single distance

Aim active laser at target.

8.532 m

Target surfaces: Measuring errors can occur

when measuring to colourless liquids, glass,

styrofoam or semi-permeable surfaces or when

aiming at hight gloss surfaces. Against dark

surfaces the measuring time increases.

Continuous measuring

2 sec

8.532 m

Aim active laser at target.

The last value measured

is displayed.

Stops continuous

measuring.

Area

Aim laser at first

target point.

Aim laser at

second target

point.

24.352 m2

The result is shown in the

main line and the measured

distance above.

STANLEY TLM65

Measuring Functions

Volume

Aim laser at first

target point.

Aim laser at

second target

point.

Aim laser at

third target

point.

78.694 m

The result is shown in the main

line and the measured distance

above.

STANLEY TLM65

Technical Data

* The typical measurement uncertainty of ± 3 mm is

valid for measurements on white, diffusive, reflective

targets up to 5 m at low ambient light and moderate

temperatures. For distances greater than 5 m, the

measurement uncertainty could increase additionally

by 0.1 mm/m. In unfavourable conditions (such as

bright sunlight, targets with poor reflectivity, or high or

low temperatures) the measurement uncertainty

could further increase up to ± 4 mm for distances

below 5 m and additionally by roughly 0.15 mm/m for

distances greater than 5 m.

Message Codes

If the message Error does not disappear

after switching on the device repeatedly,

contact the dealer.

If the message InFo appears with a

number, press the Clear button and

observe the following instructions:

Care

•Clean the device with a damp, soft cloth.

•Never immerse the device in water.

•Never use aggressive cleaning agents

or solvents.

Disposal

CAUTION

Flat batteries must not be disposed of with

household waste. Care for the environ-

ment and take them to the collection points

provided in accordance with national or

local regulations.

The product must not be disposed with

household waste.

Dispose of the product appropri-

ately in accordance with the

national regulations in force in your

country.

Adhere to the national and country specific

regulations.

Product specific treatment and waste

management can be downloaded from our

homepage.

Warranty

The Stanley TLM has a two-year warranty.

For further information on this, contact

your dealer.

Subject to change (drawings, descriptions

and technical data).

General

Range 21 cm - 20 m

8’’ - 65’

Measuring accuracy* ± 3 mm

± 1/8’’

Smallest unit displayed 1 mm

1/16 in

Laser class 2

Laser type 635 nm, < 1 mW

Autom. power switch-off after 120 s

Continuous measuring yes

Area / Volume yes

Dimension (H x D x W) 110 x 44 x 21 mm

4.33 x 1.73 x 0.83 in

Battery durability (2 x AAA) up to 3000 measure-

ments

Weight

(without batteries)

71 g / 2.5 oz

Temperature range:

-Storage

-Operation

-25 to 70 °C

-13 to 158 °F

0 to 40 °C

32 to 104 °F

No. Cause Correction

252 Temperature too high Let device cool

down.

253 Temperature too low Warm device up.

255 Received signal too

weak, measuring time

too long

Change target

surface (e.g. white

paper).

256 Received signal too

high

Change target

surface (e.g. white

paper).

257 Too much background

light

Shadow target area.

258 Measurement outside

of measuring range

Correct range.

260 Laser beam inter-

rupted

Repeat measure-

ment.

STANLEY TLM65 7

Safety Instructions

The person responsible for the instrument

must ensure that all users understand

these directions and adhere to them.

Symbols used

The symbols used have the following

meanings:

WARNING

Indicates a potentially hazardous situation

or an unintended use which, if not avoided,

will result in death or serious injury.

CAUTION

Indicates a potentially hazardous situation

or an unintended use which, if not avoided,

may result in minor injury and/or appre-

ciable material, financial and environ-

mental damage.

Important paragraphs which must be

adhered to in practice as they enable

the product to be used in a technically

correct and efficient manner.

Permitted use

•Measuring distances

Prohibited use

•Using the product without instruction

•Using outside the stated limits

•Deactivation of safety systems and

removal of explanatory and hazard

labels

•Opening of the equipment by using tools

(screwdrivers, etc.)

•Carrying out modification or conversion

of the product

•Use of accessories from other manufac-

turers without express approval

•Deliberate dazzling of third parties; also

in the dark

•Inadequate safeguards at the surveying

site (e.g. when measuring on roads,

construction sites, etc.)

•Deliberate or irresponsible behaviour on

scaffolding, when using ladders, when

measuring near machines which are

running or near parts of machines or

installations which are unprotected

•Aiming directly in the sun

Hazards in use

WARNING

Watch out for erroneous measurements if

the instrument is defective or if it has been

dropped or has been misused or modified.

Carry out periodic test measurements.

Particularly after the instrument has been

subject to abnormal use, and before,

during and after important measurements.

CAUTION

Never attempt to repair the product your-

self. In case of damage, contact a local

dealer.

WARNING

Changes or modifications not expressly

approved could void the user’s authority to

operate the equipment.

Limits of use

Refer to section "Technical data".

The device is designed for use in areas

permanently habitable by humans. Do not

use the product in explosion hazardous

areas or in aggressive environments.

STANLEY TLM65

Safety Instructions

Areas of responsibility

Responsibilities of the manufacturer

of the original equipment:

Stanley Tools

701 E. Joppa Road

Towson, Maryland 21286

www.STANLEYLASERS.com

www.STANLEYTOOLS.com

www.STANLEYTOOLS.eu

The company above is responsible for

supplying the product, including the User

Manual in a completely safe condition.

The company above is not responsible for

third party accessories.

Responsibilities of the person in

charge of the instrument:

•To understand the safety instructions on

the product and the instructions in the

User Manual.

•To be familiar with local safety regula-

tions relating to accident prevention.

•Always prevent access to the product by

unauthorised personnel.

Electromagnetic Compatibility

(EMC)

WARNING

The device conforms to the most stringent

requirements of the relevant standards

and regulations.

However, the possibility of causing inter-

ference in other devices cannot be totally

excluded.

FCC statement (applicable in U.S.)

This equipment has been tested and found

to comply with the limits for a Class B

digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to

provide reasonable protection against

harmful interference in a residential instal-

lation.This equipment generates, uses and

can radiate radio frequency energy and, if

not installed and used in accordance with

the instructions, may cause harmful inter-

ference to radio communications.

However, there is no guarantee that inter-

ference will not occur in a particular instal-

lation. If this equipment does cause

harmful interference to radio or television

reception, which can be determined by

turning the equipment off and on, the user

is encouraged to try to correct the interfer-

ence by one or more of the following

measures:

•Reorient or relocate the receiving

antenna.

•Increase the separation between the

equipment and receiver.

•Connect the equipment into an outlet on

a circuit different from that to which the

receiver is connected.

•Consult the dealer or an experienced

radio/TV technician for help.

STANLEY TLM65

Safety Instructions

Laser classification

The device produces visible laser

beams, which are emitted from the

instrument:

It is a Class 2 laser product in accor-

dance with:

•IEC60825-1 : 2007 „Radiation safety of

laser products“

Laser Class 2 products:

Do not stare into the laser beam or direct it

towards other people unnecessarily. Eye

protection is normally afforded by aversion

responses including the blink reflex.

WARNING

Looking directly into the beam with optical

aids (e.g. binoculars, telescopes) can be

hazardous.

CAUTION

Looking into the laser beam may be

hazardous to the eyes.

Labelling

Attach the laser sticker (a) of your country

language.

Laser Radiation

Do not stare into the beam

Laser class 2

acc. IEC 60825-1:2007

Maximum radiant power *: <1mW

Emitted wavelength: 620-690nm

Beam divergence: 0.16 x 0.6 mrad

Impulse duration: 0.2 x 10

-9

s - 0.8 x 10

-9

Otros manuales para TLM65

Tabla de contenidos

Otros manuales de Instrumento de medición de Stanley

Stanley

Stanley STHT77611 Manual de usuario

Stanley

Stanley BRANDON OIL MK3 Manual de usuario

Stanley

Stanley STHT77498-1 Manual de usuario

Stanley

Stanley TLM 220 Manual de usuario

Stanley

Stanley TLM 130i Manual de usuario

Stanley

Stanley SCL Manual de usuario

Stanley

Stanley FATMAX FMHT77595 Manual de usuario

Stanley

Stanley 77-030 Manual de usuario

Stanley

Stanley STHT1-77032 Manual de usuario

Stanley

Stanley Tabs 25222 Manual de usuario

Stanley

Stanley Fatmax FMHT77597 Manual de usuario

Stanley

Stanley Fatmax TLM165S Manual de usuario

Stanley

Stanley T15h Manual de usuario

Stanley

Stanley Fatmax TLM165S Manual de usuario

Stanley

Stanley CL2i Manual de usuario

Stanley

Stanley 0-77-030 Manual de usuario

Stanley

Stanley TLM99 Manual de usuario

Stanley

Stanley 0-77-030 Manual de usuario

Stanley

Stanley Fatmax FMHT77446 Manual de usuario

Stanley

Stanley STHT77616 Manual de usuario

Stanley

Stanley STHT77341 Manual de usuario

Stanley

Stanley STHT77498 Manual de usuario

Stanley

Stanley FATMAX FMHT82565-0 Manual de usuario

Stanley

Stanley AeroScout T22 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario