SRC H-CRF17-14-02-SL Guía

Design and Specification are subjected to change

Page 1

NO. Description Quantity Torque * (N-M) Remarks ** Check List

9 - 10

Bottom Plate

Top Plate

Buffer Plate

Middle Plate

Spacer 15 x 15

Use LiquidThread Locker

Nut M6

SRCDesign uses MetricSystem of Measurement and all dimensions in Millimeters

*Recommended to use the Torque specified in the table

**Denotes Usage of Liquid Thread Locker in specified Locations

Countersink Screw M 6 X 35

Scope of Supply/Bill of Material & Mounting Drawings

Part Number: H-CRF17-14-02-SL ( Supplement )

Part Description: Large Side Stand –HONDA CRF250 RALLY

Installation / Parts List / Bill of Material for Mounting

Design and Specification are subjected to change

Page 2

MOUNTING DRAWINGS

Design and Specification are subjected to change

Page 3

Mounting Instructions

Step 1:

During Mounting the Large Side Stand, let the

Motorbike firmly rest on the floor, using the

Centre Stand.

The side stand can be brought forward

(position as shown in the drawing) to have

access to the Mounting/ Assembly of the SRC

Large Side Stand.

Step 2:

Orient and slip-in the Upper Plate (2),

through the Open cut-out and pass the

shank of the Side-stand, as shown.

Step 3:

Orient and align the Middle Plate (6), as

shown, and in-line with the 4 off Mounting

hole in the Upper plate.

The Middle plate’s inner walls closely hug the

outer peripheral walls of the Side-stand base.

Design and Specification are subjected to change

Page 4

Step 4:

Slip-in the Buffer Plate (3), Spacer (4) –4 off

and Lower Plate (1), as shown and in-line with

the mounting holes.

Slip-in the Countersunk screw M6 x 35 (5) –4

off through the bottom side of the lower

plate.

Step 5:

Orient and Stack the Plates closely, as shown

and check for any slackness.

The Countersunk screws to flush into the

countersunk bores of the Lower Plate.

Slip-in the Nut M6 (7) –4 off from the top

side and secure the threads on the

Countersunk screws.

Design and Specification are subjected to change

Page 5

Step 6:

Fully tighten the Nut M6 to torque as per specification in

the BOM table.

The final mounted condition of the Large Side Stand will be

as shown in the drawing above.

Design and Specification are subjected to change

Page 6

General Instructions

1. We request you to pay attention to the Mounting Instructions in this document and

follow the step-by-step procedures.

2. This Mounting Instruction manual is a “Do It Yourself” (DIY) fitment manual of the

Accessory part to the Vehicle. We have prepared this based on our experience and

knowledge, related to the Vehicle, Part and its functional aspects.

3. SRC cannot guarantee the interchangeability of the parts to any other manufacturer’s

accessory part. It is advised to the User, to inspect and ensure the original state of all other

Vehicle parts.

4. We request you to bear in mind, that the Installed part can change the driving behaviour

and/or the stability during driving or any other dynamic conditions.

5. If you have the appropriate tools and another person to assist you in the mounting, it will

help.

6. After Completion of the Mounting and before taking on a First ride, Ensure and Check all

functions of the Vehicle. It is always advised to check loosening of the fasteners after the first

50 kilo meters of ride and at regular intervals.

7. We are showing here the Scope of Supply/ Installation/Parts list & BOM from SRC

8. To the maximum extent possible, our design use the current Mounting/Fitment of the

Original Equipment, so that Installation of these accessories will not affect the Payload or

Function of the Vehicle or the Part on which it is mounted to protect it

9. If any additional modifications are to be done, prior to the fitment of the accessories, it

will be explicitly specified in the instruction sheets.

Tabla de contenidos

Otros manuales de Accesorios para motocicletas de SRC

SRC

SRC H-CB19-15-01-SL Manual de usuario

SRC

SRC BMW-310GS-09-01-AL Manual de usuario

SRC

SRC Y-900GT-14-01-SL Manual de usuario

SRC

SRC KTM390-14-01-SL Manual de usuario

SRC

SRC BMW-F750GS-14-01-SL Manual de usuario

SRC

SRC T-XRX-07-01-SL Manual de usuario

SRC

SRC K-VS1000/20-01-01-SL Manual de usuario

SRC

SRC H-CRF300L-04-01-AL Manual de usuario

SRC

SRC BMW-F750GS-15-01-SL Manual de usuario

SRC

SRC R-HM18-14-01-SL Manual de usuario

SRC

SRC T-T900-04-01-AL Manual de usuario

SRC

SRC BMW R1250 GS Manual de usuario

SRC

SRC H-AFT17-04-01-AL Manual de usuario

SRC

SRC H-CB500X-02-01-SL Manual de usuario

SRC

SRC BMW-F750GS-01-01-SL Manual de usuario

SRC

SRC Y-T700-09-01-AL Manual de usuario

SRC

SRC H-CRF300L-01-01-SL Manual de usuario

SRC

SRC BMW-310GS-04-01-AL Manual de usuario

SRC

SRC H-AFT18-15-01-SL Manual de usuario

SRC

SRC S-VS-09-01-AL Manual de usuario

SRC

SRC K-VS1000-07-01-SL Manual de usuario

SRC

SRC H-CB500X-09-01-AL Manual de usuario

SRC

SRC BMW-R1200GS-02-01-AL Manual de usuario

SRC

SRC H-CB500X-04-01-AL Manual de usuario

Manuales populares de Accesorios para motocicletas de otras marcas

3M Speedglas 9100 MP Manual de usuario

hepco & becker

hepco & becker 6307520 00 01 Manual de usuario

HOMCOM

HOMCOM AA0-077 Manual de usuario

hepco & becker

hepco & becker 6307558 00 01 Manual de usuario

Wunderkind Custom

Wunderkind Custom 106503-F15 Guía del usuario

Dräger

Dräger HPS 3500 Manual de usuario

M-WAVE

M-WAVE SKI Manual de usuario

Kuryakyn

Kuryakyn 6212 Manual de usuario

hepco & becker

hepco & becker 6507504 00 01 Manual de usuario

Tool it

Tool it PROMAX LCD 9.13G Manual de usuario

Custom Dynamics

Custom Dynamics TruWrapz Manual de usuario

Roof

Roof RO200 CARBON Manual de usuario

Kabuto

Kabuto Japan IBUKI Manual de usuario

PUIG

PUIG 5051 Manual de usuario

rizoma

rizoma ZTH050 Manual de usuario

Joubert

Joubert 10001711 Manual de usuario

Sperian

Sperian Optrel p420 Manual de usuario

SW-Motech

SW-Motech SBL.01.971.10000/B Manual de usuario