
All images are for illustration purposes only. Actual products may vary.
FEATURES
Superblend Blender & Grinder Instruction Manual
IMPORTANT SAFEGUARDS
WHEN USING ANY ELECTRICAL APPLIANCE, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:
1 Read all instructions carefully before using the appliance.
2 This appliance is intended for household use only. It is not
suitable for commercial use such as staff kitchen areas and
other working environments.
3 Ensure that the appliance is always placed on a firm and flat
surface, away from the edge of the work top. Do not place
the appliance onto a metal tray or metal surface whilst in use.
Do not place the appliance on, or near, a hot gas or electric
burner or in a heated oven. Do not operate the appliance with
wet hands or barefoot.
4 Keep the appliance and mains cable away from the edges of
work tops and out of reach of children. Route the cable so
it does not overhang, and cannot be tripped over or caught.
5 Do not let the cable run across an open space, such as
between a low socket and a table, or across any hot area, such
as cooker. Heat may damage the mains cable.
6 The connections on both sides of the mains cable (the
appliance and socket) should never be strained. If the mains
cable is damaged it must be replaced by qualified person or
service to avoid any hazards.
7 Do not use the appliance in a bathroom,
near water, or outdoors. Do not immerse any of
the parts (appliance, mains cable, plug) in water
or other liquids to protect against fire, electric
shock and personal injury.
8 Do not use the appliance if it is damaged or
malfunctions. Do not leave the appliance unattended
whilst in use. Use and store it out of reach of children.
9 This appliance must not be operated by an external timer or
a remote control system.
10 SQ Professional Ltd may not be held liable for eventual
damages to persons, animals or objects caused by incorrect
installation or deriving from improper, erroneous or
unreasonable use.
11 The connector
and transmitter
should always be
kept dry. Before washing and drying disconnect the power
supply; ensure that the connector
and transmitter
are
completely dry before you reconnect the appliance to power
supply.
12 Ensure the lid
or assembled grinder
are securely in
place and the jug
is correctly locked onto the motor block
before operating the appliance.
13 Do not switch on the appliance when it is empty. Ensure
there is the at least a minimum amount of liquid or solid
ingredients in the blender or grinder.
14 Always close the lid
and the anti-drip spout
, or have
the grinder securely placed and locked onto the motor block
before you switch the appliance on. Do not open the lid
or attempt to open the grinder
whilst the appliance
is running.
15 Keep hands and utensils out of the jug
while
blending to reduce the risk of severe injury to
persons or damage to the blender. A scraper
may be used but only when the blender is not
running.
16 Blades are extremely sharp. Handle carefully.
17 Switch off the the blender and unplug from the socket
before changing attachments or approaching parts that
move while in use. Unplug the blender when not in use.
18 Ensure that the blender has come to a complete stop before
cleaning and storing away. Keep the attachments, motor
block
, cable, and plug away from sources of heat. Store
in a dry place.
19 Do not use the blender for any other purpose
than its intended use.
20 Use the jug
or grinder
only with the motor block
supplied (and vice versa) and do not tamper with the
connector in any way.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE!
5