Spypoint CELL-LINK Manual de usuario
QUICK START GUIDE
CELL-LINK v.1.6
ENGLISH
2
IN THE BOX
1x CELL-LINK cellular adapter
1x Micro SIM card (preactivated and inserted into the CELL-LINK)
1x Cable with SD adapter (#CL-CBL)
1x Antenna
1x Mounting strap
1x Quick Start Guide
NOTE
Memory card and batteries are sold separately.
User Manual, latest rmware, and FAQ available at:
www.spypoint.com/support.
COMPONENTS
qCable with SD adapter
(#CL-CBL)
wSlot for mounting strap
eCable lock hole
rSIGNAL lights (5)
tSIM card slot
yLatch to hold/release
the battery compartment
uBattery compartment
iAA battery holder
oSTATUS light
aON/OFF switch
sMicroSD card slot
dScrew-thread for standard
¼”-20 tripod mount
fAntenna
gPort for cable with SD
adapter
h12 V jack
jLocking latch
ENGLISH
3
ENGLISH
4
PREPARATION
ATTACH THE ANTENNA
When buying the CELL-LINK, the
antenna comes in the box and
is detached from the device.
To attach it, follow the next steps:
1. Remove the cap which covers
the antenna connector of the
CELL-LINK.
2. Screw the antenna in the
connector by turning it
clockwise.
SELECT A POWER SOURCE
• 8 lithium or alkaline AA batteries
• 12 V rechargeable battery
(#KIT-12V, sold separately)
• 3.7 V rechargeable battery pack
(#LIT-10, sold separately)
NOTE
We recommend using the SPYPOINT #LIT-10
rechargeable lithium battery pack, sold separately.
ENGLISH
5
FOR BEST RESULTS AND NO LEAKAGE
• Use only new lithium or alkaline batteries.
• Do not mix old and new batteries.
• Do not use rechargeable AA batteries
(their lower voltage can generate operational issues).
HOW TO INSTALL AA BATTERIES PROPERLY
• Unlock and open the CELL-LINK door.
• Eject the battery holder by pushing
the latch (1) forward and pressing
down on the battery holder (2).
The battery holder will be unlocked
and you will be able to remove it.
• Insert 8 AA batteries following the
(+) and (-) polarity indicators.
• Place the battery holder back into the battery compartment,
an audible click should be heard.
FORMATTING YOUR MICROSD CARD
Before inserting the microSD card into your CELL-LINK, you must
reformat it using a computer to ensure proper functionality. Go
to our website: www.spypoint.com, if you need help formating
your microSD card.
The memory card is sold separately. Therefore, you must
rst purchase a class 10 microSD card, between 2 and 32 GB
of memory.
ENGLISH
6
INSERTING A MICROSD CARD
• Open the CELL-LINK battery
compartment door.
• Make sure the camera is turned
OFF.
• Insert the microSD card in the
slot for microSD cards, the metal
contacts facing the bottom (as
shown).
• The card is inserted correctly when
a click is heard.
ACTIVATING YOUR CELL-LINK
You have to activate your CELL-LINK before you can
use it. To do so, you will need the activation code.
FINDING THE ACTIVATION CODE
The activation code is located inside the CELL-LINK’s battery
compartment door.
Activation code
ENGLISH
7
To activate your device, you have two choices: you can
either do it via the SPYPOINT app or via our website
www.spypoint.com.
SPYPOINT APP
If you choose to use the SPYPOINT app to activate your
device, follow these steps:
1. On Google PlayTM or the App StoreTM,
search for“SPYPOINT app”.
2. Download and install the app on your smartphone or tablet.
3. Start the app. Select “ACTIVATE A DEVICE”. In the list, select
“CELL-LINK”, then follow the steps to create an account.
4. Once completed, a conrmation email with instructions on
how to nalize the creation of your account will be sent to
you.
5. Log in to the SPYPOINT app using your email address and
password.
SPYPOINT.COM WEBSITE
If you choose to use our SPYPOINT website to
activate your device, follow these steps:
1. On the www.spypoint.com website, select“LOGIN”in the
top navigation menu. On the displayed “SPYPOINT”page,
select “REGISTER”, ll out the required elds, then log in.
2. Select the +sign on the far right of the page; in the list, select
“CELL-LINK”, then follow the steps.
ENGLISH
8
3. Once completed, a conrmation email with instructions on
how to nalize the creation of your account will be sent to
you.
4. On the SPYPOINT website, log in to your account using your
email address and password.
CHOOSING A PHOTO TRANSMISSION PLAN FOR YOUR CAMERA
Go to www.spypoint.com/en/spypoint-experience/plans
to read the latest oers and choose the plan that suits you.
CONFIGURING YOUR CELL-LINK
Both the SPYPOINT app and website allow you to remotely
congure all the CELL-LINK’s parameters and to obtain the status
of its main elements, including cellular signal strength, battery
power level, and space used on the SD card.
Your new settings will be applied the next time your CELL-LINK
communicates with the SPYPOINT app or website.
NOTE
Before starting the CELL-LINK, make sure you have successfully
congured your trail camera according to your preferences and
that you have done this by following your camera’s User Manual.
ENGLISH
9
CONFIGURATION: MAIN SETTINGS
Here are the recommended camera settings to ensure
the optimal performance of your CELL-LINK:
• A low-resolution photo format.
• Precisely adjust the date and time.
• A delay no shorter than 1 minute between each detection.
• In Time-lapse mode, a delay no shorter than 1 minute.
NOTE
The CELL-LINK doesn’t support video transfers. However, if you
congure your camera to take a picture before each of your
videos, that picture will be sent to you via the CELL-LINK.
STARTING YOUR CELL-LINK
BEFORE TURNING YOUR CAMERA ON
Refer to the image below to familiarize yourself with the meaning
of the STATUS and SIGNAL LEDS. These light indicators will guide
you along the startup process.
ENGLISH
10
STARTING THE CELL-LINK
1 2
All the lights turn on for
three seconds.
2 possibilities:
The 1st red signal LED ashes
=low batteries.
The STATUS light stays on
+5 LED ashing = searching
for cellular signal. This can
take a few minutes.
STARTING YOUR CELL-LINK
or
Otros manuales para CELL-LINK
3
Tabla de contenidos
Otros manuales de Cámara de exploración de Spypoint
Spypoint
Spypoint S-WiFi model Manual de usuario
Spypoint
Spypoint FORCE-11 Manual de usuario
Spypoint
Spypoint LINK-MICRO-S-LTE Manual de usuario
Spypoint
Spypoint LINK-EVO Guía
Spypoint
Spypoint LINK-MICRO-LTE Manual de usuario
Spypoint
Spypoint SOLAR-W Manual de usuario
Spypoint
Spypoint FORCE-10 Manual de usuario
Spypoint
Spypoint FORCE-11 Manual de usuario
Spypoint
Spypoint Force-Dark Manual de usuario
Spypoint
Spypoint LIVE Manual de usuario
Spypoint
Spypoint SDB-85 Manual de usuario
Spypoint
Spypoint MMS Manual de usuario
Spypoint
Spypoint FLEX G-36 Manual de usuario
Spypoint
Spypoint IRON-10 Manual de usuario
Spypoint
Spypoint LINK-MICRO-S-LTE Manual de usuario
Spypoint
Spypoint LINK-MICRO-LTE Manual de usuario
Spypoint
Spypoint LM2 Manual de usuario
Spypoint
Spypoint FLEX G-36 Manual de usuario
Spypoint
Spypoint LINK-3G Manual de usuario
Spypoint
Spypoint MMS Manual de usuario
