2.3 Video Recording
2.4 Audio Recording
To begin recording video, ensure the device is in Standby Mode
(indicated by a solid red Power LED) and push the video record
slider up to the On state (No. 1, labeled with “Video Rec” text) .
The Video LED will start flashing blue slowly, indicating that the
device is recording video.
Once fully charged, the device can continuously record video for
about 200 mins at 1080P resolution with night vision turned off.
To , push the slider to the state. The stop recording video down Off
recording will stop, and the Power LED will return to a solid red,
indicating that the camera has returned to Standby Mode.
To , push the slider to the state. The stop recording audio down Off
recording will stop, and the Power LED will return to a solid red,
indicating that the camera has returned to Standby Mode.
To begin recording audio, ensure the device is in Standby Mode
and (No. 2, labeled with “Audio Rec” push the audio record slider
text) . The Audio LED will start flashing yellow up to the On state
slowly, indicating that the device is recording audio.
2.5 Night Vision
To activate night vision, ensure that the device is in Video
Recording Mode and (No. 7, labeled push the night vision slider
with "Night Vision" text) position.up to the On
SPIKECAM
05
