Sper scientific 840029 Manual de usuario
- 8 -
FIVE YEAR WARRANTY
Sper Scientific warrants this product against defects in
materials and workmanship for a period of five years from
the date of purchase, and agrees to repair or replace any
defective unit without charge. If your model has since been
discontinued, an equivalent Sper Scientific product will be
substituted if available. This warranty does not cover probes,
batteries, battery leakage, or damage resulting from
accident, misuse, or abuse of the product. Opening the
meter to expose it’s electronics will break the waterproof
seal and void the warranty.
To obtain warranty service, ship the unit postage prepaid to:
SPER SCIENTIFIC LTD.
8281 East Evans Rd. Suite #103
Scottsdale, Arizona 85260
The defective unit must be accompanied by a description of
the problem and your return address. Register your product
online at www.sperwarranty.com within 10 days of purchase.
Rev. 2/22/2018
DIGITAL SOUND
LEVEL METER
840029
Instruction Manual
- 2 -
CONTENTS
I. Introduction ............................................................................ 3
II. Panel Description ................................................................... 3
III. Operating Instructions
A. Measuring Procedure ....................................................... 4
B. Settings for General Applications ..................................... 4
C. Signal Output.................................................................... 4
D. Calibration ........................................................................ 4-5
E. Precautions....................................................................... 5
F. Battery Replacement ........................................................ 5
IV. Specifications ......................................................................... 6
Frequency Weighting (A and C) Characteristics.................... 7
Response (Fast and Slow) Characteristics............................ 7
V. Warranty ................................................................................. 8
- 7 -
FREQUENCY WEIGHTING (A and C) CHARACTERISTICS
Frequency dB A dB C Tolerance dB
31.5 -39.4 -3.0 ± 5.0
40 -34.6 -2.0 ± 4.5
50 -30.2 -1.3 ± 4.0
63 -26.2 -0.8 ± 3.5
80 -22.5 -0.5 ± 3.0
100 -19.1 -0.3 ± 2.5
125 -16.1 -0.2 ± 2.0
160 -13.4 -0.1 ± 2.0
200 -10.9 0± 2.0
250 -8.6 0± 2.0
315 -6.6 0± 2.0
400 -4.8 0± 2.0
500 -3.2 0± 2.0
630 -1.9 0± 2.0
800 -0.8 0± 2.0
1000 00± 2.0
1.25k 0.6 0± 2.0
± 2.5
1.6k 1.0 -0.1 ± 3.0
- 2.5
2k 1.2 -0.2 ± 3.5
- 3.0
2.5k 1.3 -0.3 ± 4.0
- 3.5
3.5k 1.2 -0.5 ± 4.5
4k 1.0 -0.8 - 4.0
50.5 -1.3 ± 5.0
- 4.5
6.3 -0.1 -2.0 ± 5.5
- 5.0
8-1.1 -3.0 ± 6.0
- 5.5
RESPONSE (Fast and Slow) CHARACTERISTICS
Fast Reading is maximum value at 0.2 seconds
Slow Reading is maximum value at 1.5 seconds
- 6 -
IV. SPECIFICATIONS
Display 3 1/2 digits, 3/4" LCD
Functions dB ( A and C Frequency Weighting),
Response (Fast, Slow),
Max. Hold
AC/DC Output
Measurement Range 30-70 dB, 60-100 dB, and 90-130 dB
40 dB on each step, with overload indicator
Resolution 0.1 dB
Accuracy ± 1.5 dB
Frequency 31.5 Hz to 8,000 Hz
Microphone 1/2" condenser microphone.
Response (Fast/Slow) Fast (F): t = 200 ms
Slow (S): t = 500 ms
Internal Calibration Built-in internal calibration on front panel.
Internal 94 dB / 1 kHz square wave generator
Output Signal AC: 0.5 Vrms corresponding to each range
step. DC: 0.3-1.3 VDC, 10 mV per dB.
Output impedance is 600 ohm.
Output Terminal 3.5 mm diameter phone jack
Operating Temp. 32-122°F (0-50°C)
Operating Humidity Less than 90% RH
Power Supply One 9V battery, heavy duty or alkaline type
Power Consumption Approximately DC 6 mA
Weight 10 oz.
Dimension 8 1/8" x 3 1/8" x 1 3/8"
CE Compliant Yes
Included Accessories Instruction Manual, 9V battery, calibration
screw driver, and hard carrying case
Optional Services &
Accessories
840029C NIST Traceable Cert. of Calibration
850016 Acoustical Calibrator
840091 Wind Screen
- 3 -
I. INTRODUCTION
Perfect for testing for OSHA requirements, your new instrument meets
IEC 61672:2013 Class 2 frequency and time weighting specifications,
DIN 45633 and JIS 1502.
It covers the 30 - 130 dB in the "A" scale, and 35 - 130 dB in the "C"
scale, with an accuracy of ±1.5 dB. This meter can be acoustically
calibrated in compliance with OSHA, using Sper Scientific's Acoustical
Calibrator 850016 (or equivalent).
Features include a built-in calibration adjustment, Fast or Slow time
weightings, Maximum Hold function, large display with a resolution of
0.1 dB, low battery indicator, and AC or DC output. The instrument
has a fold out tripod stand and comes with carrying case, instructions,
calibration tool, and a 9V battery.
II. PANEL DESCRIPTION
Overload indicator
Power selector
Range selector
Microphone
Display
Calibration Adjustment
Weighting selector (A or C)
Response selector (Slow/Fast/Max Hold)
Signal Output terminal
- 4 -
III. OPERATING INSTRUCTIONS
A. MEASURING PROCEDURE
• Slide the POWER selector to the ON (AC) or ON (DC) position.
• Slide the WEIGHTING selector to the "A" or "C" position. The "A"
frequency weighting simulates human ear response. During an
environmental sound level measurement, select the "A" weighting.
The "C" weighting approximates a flat response. Typically, "C" is
used to check the noise of machinery where the target sound level
is already known. (See Frequency Weighting Characteristics,
page 7.)
• Slide the RESPONSE selector to the FAST or SLOW position.
For general applications, select FAST, which simulates the human
ear's response time. The SLOW setting is used to obtain an
average of vibrating sound levels.
• Find the appropriate measuring range using the RANGE selector.
If the OVERLOAD INDICATOR (a triangle shape) appears in the
upper-left display, slide the RANGE selector to another setting.
• Point the microphone at the sound source, the sound level will be
displayed in decibels (dB).
• To power off the unit, slide the POWER selector to the OFF
position.
B. SETTINGS FOR GENERAL APPLICATIONS
• Set POWER selector to an ON position.
• Set RESPONSE selector to Fast.
• Set WEIGHTING to "A".
• Set RANGE selector to the appropriate range.
C. SIGNAL OUTPUT
• The 3.5 mm diameter SIGNAL OUTPUT terminal may be used to
connect the unit to an external output device, such as an analyzer,
recorder, or controller.
• When connecting meter with an external output device, use the
appropriate ON selection (AC or DC).
D. CALIBRATION
The meter's CALIBRATION ADJUSTMENT is located on the front
panel. The meter has a built-in internal standard of 94 dB/1 KHz. Use
the following procedures to calibrate the instrument before operating
for the first time, or when the meter has not been in use for awhile.
Internal Calibration:
- 5 -
• Slide the POWER selector to an ON position.
• Slide the RANGE selector to the 50 - 100 dB position.
• Slide the RESPONSE selector to FAST.
• Slide the WEIGHTING selector to CAL.
• Use the calibration screw driver to gently turn the CALIBRATION
ADJUSTMENT until the display reads 94.0 dB.
External Calibration:
Use Sper Scientific's Acoustical Calibrator 850016 (or equivalent) to
calibrate the unit, including the microphone, in compliance with OSHA.
• Slide POWER selector to an ON position.
• Power on the acoustical calibrator and place the calibrator onto the
Sound Level Meter's MICROPHONE.
• Slide the RANGE selector to the 50 - 100 dB position.
• Slide the RESPONSE selector to FAST.
• Slide the WEIGHTING selector to "A".
• Use the calibration screw driver to gently turn the CALIBRATION
ADJUSTMENT until the display reads 94.0.
E. PRECAUTIONS
• Do not store or operate the unit in high temperatures or in a
high humidity environment for long periods.
• Keep the microphone dry and avoid intense vibrations.
• Do not force the CALIBRATION ADJUSTMENT, doing so may
damage the mechanism and void the warranty.
F. BATTERY REPLACEMENT
Replace the battery when "BAT" is displayed. Accurate measurements
may be made for several hours after the low battery indicator appears.
Otros manuales de Instrumento de medición de Sper scientific
Sper scientific
Sper scientific 850009 Manual de usuario
Sper scientific
Sper scientific 840063 Manual de usuario
Sper scientific
Sper scientific 840021 Manual de usuario
Sper scientific
Sper scientific 850070 Manual de usuario
Sper scientific
Sper scientific 850015 Manual de usuario
Sper scientific
Sper scientific 840062 Manual de usuario
Sper scientific
Sper scientific 800048 Manual de usuario
Sper scientific
Sper scientific 850026 Manual de usuario
Sper scientific
Sper scientific 800058 Manual de usuario
Sper scientific
Sper scientific 300079 Manual de usuario
Sper scientific
Sper scientific 800034 Manual de usuario
Sper scientific
Sper scientific 850011 Manual de usuario
Sper scientific
Sper scientific 850039 Manual de usuario
Sper scientific
Sper scientific 850068 Manual de usuario
Sper scientific
Sper scientific 850081 Manual de usuario
Sper scientific
Sper scientific 860041 Manual de usuario
Sper scientific
Sper scientific 850081 Manual de usuario
Sper scientific
Sper scientific 840006 Manual de usuario
Sper scientific
Sper scientific 900019 Manual de usuario
Sper scientific
Sper scientific 840080 Manual de usuario
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario