Spectra Precision HV302 Manual de usuario

HV302 Hands-on Training

January 2015

HV302 Controls

Battery Status LED

Level-LED

Manual/Single Slope Mode/

Standby Button

Power Button

HI-/Manual-

Standby - LED

Slope/Alignment

Buttons

Rotation Button

Scan Button Scan Button Rotation Button

RC402N Radio Remote Control

Left & Right

Buttons

Menu button

Up & Down Buttons

LCD - Display

On/Off Button

RC402N-Battery status LED

Enter button

Hand loop

Manual/Single Slope Mode/

Standby Button

HV302 Peripherals

Rubber Feet

Serial Number

5/8” x 11

Beam Exit

Metal Sunshade Sighting Guides

Rotor Vial

HV302 Peripherals

Plastic Feet

Rubber Foot Laser Safety Labels

5/8” x 11

Installing The Batteries

Enter the battery housing, by

turning the battery-door knob

counterclockwise

Install/remove the rechargeable

battery Pack. It is keyed to

prevent miss-insertion. The cage

prevents accidental charging of

Alkaline batteries

Do not try to open the cage for

exchanging the rechargeable

batteries

Worldwide charger has plugs for

US, EU, AU and GB

Recharge time is about 10 hours

Installing The Batteries

If using 4 x D-cell Alkaline's, note the

plus (+) and minus(-) diagram on the

battery door. Do NOT try to install

Alkaline batteries in the rechargeable

battery Pack!

Special screws are used to ensure only

autorized service centers can replace the

batteries. Trying to open the cage will

destroy the cage lid holders.

New warning label

at the battery cage

Special Features using the optional RC402N

M-Button : Quickly press and release

starts the MENU entry and can be used

to return to the previous menu position

E-Button : Quickly press and release

starts the selected mode

Manual Button : Quickly press and

release activates/deactivates the manual

mode/ single slope mode; press and

hold for 3 seconds activates/deactivates

the Standby mode

Up/Down Arrow Buttons

Left/Right Arrow Buttons

ON/OFF button - press for 1 second

to turn on the unit; press and hold for 2

seconds to turn off the unit

RC402N Battery- Status-LED (red)

Battery status laser

Mask mode indication

HI-Alert activated

The remote control mirrors the basic functionality of the HV302 keypad and

offers additional features.

Using the optional Radio Remote Control

Powering the RC402N

1. Open the battery door using a coin

or similar pry device to release the

battery door tab on the RC402N.

2. Insert two AA batteries noting the

plus (+) and minus (-) diagrams

inside the battery housing.

3. Close the battery door. Push down

until it “clicks” into the locked

position.

Turning On/Off the Radio Remote Control

Press the button to turn on the radio remote control.

To turn off the radio remote control, press and hold

the button for 2 seconds.

Display at RC402N

HV302 –horizontal setup Display at RC402N

HV302 - vertical setup

Pairing the remote control with the transmitter

First, make sure the transmitter and the

remote control are turned off. Then press

and hold the button and turn on the

transmitter.

–The battery LED flashes fast.

During the next 6 seconds repeat the

same steps on the remote control.

The Laser’s red battery LED flashes fast

and the remote’s display shows Pairing

OK for one second and then the same

function as the laser is actually working to

indicate the transmitter has been matched

with the remote control.

Otros manuales para HV302

Tabla de contenidos

Otros manuales de Nivel láser de Spectra Precision

Spectra Precision

Spectra Precision DET-2 Manual de usuario

Spectra Precision

Spectra Precision LL300S Guía de instalación

Spectra Precision

Spectra Precision AL28M Manual de usuario

Spectra Precision

Spectra Precision LL300 Manual de usuario

Spectra Precision

Spectra Precision Trimble UL 633N Guía de instalación

Spectra Precision

Spectra Precision Trimble UL 633N Manual de usuario

Spectra Precision

Spectra Precision GL6X2N Guía de instalación

Spectra Precision

Spectra Precision LL300S Manual de usuario

Spectra Precision

Spectra Precision LL100N Instrucciones de montaje

Spectra Precision

Spectra Precision LL300S Manual de usuario

Spectra Precision

Spectra Precision LL300S Manual de instrucciones

Spectra Precision

Spectra Precision 1452GC Manual de usuario

Spectra Precision

Spectra Precision GL412N Manual de usuario

Spectra Precision

Spectra Precision HV302 Manual de usuario

Manuales populares de Nivel láser de otras marcas

Nedo

Nedo ET-5 Manual de usuario

geo-FENNEL

geo-FENNEL Maxi-Liner FL 65 HP Manual de usuario

LaserLiner

LaserLiner X2-Laser Manual de usuario

Spectra

Spectra LL300N Manual de usuario

geo-FENNEL

geo-FENNEL Selection PRO FLG 40-PowerCross GREEN SP Manual de usuario

Nedo

Nedo Crossliner 4 Manual de usuario

Lasertec

Lasertec FX360G Manual de usuario

Flex

Flex ALC 8 Manual de usuario

Black & Decker

Black & Decker LZR5 Manual de usuario

Johnson

Johnson 40-6692 Manual de usuario

Cocraft

Cocraft HL 20-SG Manual de usuario

Zircon

Zircon iLine Manual de usuario

HWH

HWH 310 SERIES Manual de usuario

Leica

Leica iCON robot 60 Manual de usuario

LaserLiner

LaserLiner SuperCross-Laser SCL 2 Manual de usuario

LaserLiner

LaserLiner ActiveFinder XP Manual de usuario

DeWalt

DeWalt DW082 Manual de usuario

imex

imex EL20 Manual de usuario