Speco HTB11FFi Manual de usuario
HTB11FFi
HTB11FFi
580 Line Color Bullet Camera
Intensifier 2 Series, Focus Free
Wall & Ceiling Mountable
Please read this manual thoroughly before operation and keep
it handy for further reference.
WARNING & CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE
REFER SERVICINGTO QUALIFIED
SERVICE
PERSONNEL
CAUTION
The lighting flash with an arrowhead symbol, within an equilateral triangle is
Intended to alert the user to the presence of un-insulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute
ariskofelectricshocktopersons____________________________________
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (serving) instructions
in
the
literature
accompanying
the
appliance
SERVICE
PERSONNEL
.
_
_____________
_
in
the
literature
accompanying
the
appliance
_
_________________
INFORMATION -This equipment has been tested and found to company with
limits for a class a digital device Pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful
Interference When the equipments operated in a commercial environment.
This equipment generates, uses, and Can Radiate radio frequency energy and
if not installed and used in accordance with the instruction manual, may Cause
Harmful interference to radio communications. Operation of this equipment in a
id ti l
i
lik l
t
hfl
it f
i
hi h
DO NOT use power sources other than that specified.______
res
id
en
ti
a
l
area
i
s
lik
e
l
y
t
ocause
h
arm
f
u
l
i
n
t
er
f
erence
i
nw
hi
c
h
Casetheuserwillberequiredtocorrecttheinterferenceathisownexpense.
WARNING – Change or modification not expressly approved by the manufacturer could void
the user’s authority to operate the equipment__________________________________
CAUTION : To prevent electric shock and risk of fire hazards.
DO
NOT
expose
this
appliance
to
rain
or
moisture
000
DO
NOT
expose
this
appliance
to
rain
or
moisture
.
000
This installation should be made by a qualified service person and should conform to all local codes.
2
CONTENTS
Package Contents 4
Precautions 5
Camera Installation 6-10
OSD Menu Tree
Features 11-12
13
OSD Menu Details 14-17
Troubleshooting 18-19
Specifications 20
Dimensions 21
3
Warranty 22
PACKAGE CONTENTS
Please make sure that the following items are included
in the package:
1 HTB11FFI Camera
1
HTB11FFI
Camera
4 Mounting Screws
1 Video test Connector
1 Extra Mount Plate
1 Wrench
Please leave this manual with the end-user for future
reference
reference
.
4
PRECAUTIONS
•THIS CAMERA SHOULD BE ONLY INSTALLED BY QUALIFIED
PERSONNEL
•TO PREVENT A FIRE OR ELECTRICAL HAZARD PLEASE USE
PROPER POWER CABLE
•DO NOT CLEAN THE FRONT COVER WITH AN ABRAISIVE
CLEANING MATERIAL - PLEASE USE A SOFT CLOTH OR
TISSUE TO CLEAN THE FRONT COVER
•THERE ARE NO USER-SERVICEABLE PARTS INSIDE.
PLEASE DO NOT DISASSEMBLE THIS CAMERA OTHER THAN
TO MAKE INITIAL ADJUSTMENTS
•
PLEASE USE A UL APPROVED REGULATED 24 VOLT AC OR
•
PLEASE
USE
A
UL
APPROVED
REGULATED
24
VOLT
AC
OR
12 VOLT DC POWER SUPPLY
•PLEASE USE APPROPRIATE LOW VOLTAGE POWER CABLE
TO PREVENT FIRE OR ELECTRICAL SHOCK
•PLEASE INSURE THAT YOUR INSTALLATION AREA CAN
SUPPORT THE WEIGHT OF THE CAMERA
•PLEASE HANDLE THIS CAMERA CAREFULLY:
- DON’T USE A STRONG OR ABRASIVE DETERGENT WHEN
CLEANING THE CAMERA.
- DON’T EXPOSE THE CAMERA TO DIRECT SUN
5
CAMERA INSTALLATION
CONNECT POWER CABLE
1. WHEN USING 12 VOLTS DC (constant voltage 500 mA)
DC 12V Power Supply
Power Input :RED
Center : (+)
2. WHEN USING 24 VOLTS AC (40 Volt Amps)
3. CONNECT VIDEO CABLE
-CONNECT BNC CABLE TO THE BNC JACK.
BLACK:(-)
RED(+)
Power Supply
AC 24V
4. CONNECT Alarm output (Relay output)
-Connect (+ , COM) for Positive activation and (-. COM) for
Negative activation of External Alarm Device when Motion
Detection is ‘ON’ in the camera.
5. CONNECT RS-485 CABLE
-Connect 2Wire Cable to the 485 port as below.
+ RED
-WHITE
COM (GREY)
Alarm Output
Positive Alarm Device (NO)
Negative Alarm Device(NC)
6
CAMERA INSTALLATION
CONTROL BOARD
1
23
1) Video Test Terminal
: For second video output
2
)
OSD
(
On Screen Dis
p
la
y)
Jo
y
stick
4
)( py)y
: Press the Joy stick for one second until the OSD menu tree
appears on the screen. Move the Joy Stick up, down, left &
right to control the OSD functions.
3) DIP Switch setting for RS485 (Pelco-D)
: Please see the next page for controlling this switch.
4) Lens adjustment (for Zoom) Switches
7
4)
Lens
adjustment
(for
Zoom)
Switches
: Press Zoom or Tele button when desired, Focus is
automatically matched without any adjustment.
CAMERA INSTALLATION
DIP Switch Setting for RS-485 (Pelco-D)
Address Baud Rate
1) Address Setting
to set Camera Address, place switches based on below chart.
1 2 3 4 5 6 7
2) Baud rate Setting
to set Baud rate, please refer the chart below.
8
CAMERA INSTALLATION
COMPATIBILITY
CVCTPEXT“A” type Box “B” type Box
CVCTPLATE
★Original Base part
Should be taken away
to use CVCTPLATE
Hole 1 : CVCTPEXT
Hole 2 : Electrical Box
“
B
”
type
[CVCTPLATE Hole Description]
9
Hole
2
:
Electrical
Box
B
type
Hole 3 : Electrical Box “A” type
CAMERA INSTALLATION
COMPATIBILITY
BCP ( USING 7246WMT)
CVCTPLATE
CVCTPEXT
10
BCP (Direct connection )
Otros manuales para HTB11FFi
2
Tabla de contenidos
Otros manuales de Cámara de seguridad de Speco
Speco
Speco O8VD1 Manual de usuario
Speco
Speco CVC-345BC Manual de usuario
Speco
Speco H8D7M Manual de usuario
Speco
Speco CLPR67B4B Manual de usuario
Speco
Speco CVC61iLTB Manual de usuario
Speco
Speco O4iT1M Manual de usuario
Speco
Speco O4iT2 Manual de usuario
Speco
Speco O8VB2 Manual de usuario
Speco
Speco HT-647HRTP Manual de usuario
Speco
Speco DD2 Hoja de datos
Speco
Speco PROVIDEO CVC-620WP Manual de usuario
Speco
Speco CVC-860DN/24 Manual de usuario
Speco
Speco CVC637HW Manual de usuario
Speco
Speco Deterrent O4TDD1M Manual de usuario
Speco
Speco HT-INTB1 Manual de usuario
Speco
Speco O6MDP3N Manual de usuario
Speco
Speco CILT13D1G Manual de usuario
Speco
Speco O8D2M Manual de usuario
Speco
Speco O4VB2 Manual de usuario
Speco
Speco WDR-R3 Manual de usuario
