Sony UP-CX1 series Manual de usuario

2-699-693-11 (1)

Printer Driver

(for Mac OS X)

Installation Guide

This guide describes installation and the use of the Printer

Drivers for Mac OS X.

Before using the printer driver, be sure to read the “ReadMe”

file located on the CD-ROM.

Before Using this Software

UP-CX1 Series

Windows 2000

Table of Contents

Operation Environment Requirements ................3

About This Document ............................................3

Installing the Printer Driver .................................4

Before Installation ..............................................4

Installation Procedure .........................................4

Using More Than One Printer ..............................7

Installation Procedure .........................................7

Uninstalling the Printer Driver .............................9

Uninstallation Procedure ....................................9

Making Page Settings ..........................................10

Making Print Settings ..........................................11

Setting the Number of Copies ...........................11

Setting the Graphics Attributes .........................11

Checking the Print Settings ..............................12

Printing .............................................................12

Apple, Mac, Macintosh, and Mac OS are registered

trademarks of Apple Computer Inc. in the United States

of America and other countries.

Other company names and product names appearing in

this document are generally registered trademarks or

trademarks of their respective owners.

Operation Environment Requirements / About This Document 3

Windows 2000

Operation Environment

Requirements

The system requirements for use of the printer driver are

as follows.

• Operating system: Mac OS X 10.3 or later

• Computer: Macintosh computer running Mac OS X,

with USB port as standard equipment

• Memory: 128 MB or more

• Hard disk: At least 2 MB of free space at time of

installation

About USB 2.0

• The UP-CX1 series conforms to USB 2.0

specifications.

• USB 2.0 is fully backward compatible with USB 1.1.

• USB 2.0 supports conventional Full (low) speed and

Hi-Speed operation.

• In a USB 1.1 environment, connection and operation

at Full speed is possible. For Hi-Speed operation, the

following requirements must be met.

– Operating system

Mac OS X 10.3 or later

– Computer

Macintosh computer providing USB 2.0 port as

standard equipment

– Certified USB 2.0 cable

Note

The printer will not operate in a Mac OS X Classic

environment.

About This Document

The screen messages and other information shown in

this document assume connection of the UP-CX1. If

another printer model from the UP-CX1 series is

connected, read any occurrence of “UP-CX1” as the

model name of your printer.

The screen messages and other information shown in

this document assume the use of Mac OS X 10.4.x.

Actual messages may differ slightly depending on your

system and application software.

Installing the Printer Driver 4

Windows 2000

Installing the Printer

Driver

Before Installation

Connecting multiple printers

When several UP-CX1 series printers are connected to a

single computer, install the printer driver for the first

printer, according to the explanation in “Installation

Procedure.” Then connect the subsequent UP-CX1

series printers to the computer and refer to the section

“Using More Than One Printer.”

Installation Procedure

With the printer not yet connected to the computer,

turn power to the computer on.

Insert the supplied CD-ROM “PRINTER DRIVER

& INSTRUCTIONS FOR USE UP-CX1” into the

CD-ROM drive and double-click the [UP-

CX1Series] icon on the desktop. If you have

downloaded the driver from a web site, double-

click the downloaded file to mount it, and then

double-click the [UP-CX1Series] icon on the

desktop.

The following screen appears.

Double-click the [UP-CX1Series.pkg] icon.

The following installation screen appears.

Click [Continue].

The Software License Agreement screen appears.

Read the Software License Agreement and then

click [Continue].

The Software License Agreement acceptance sheet

appears.

Installing the Printer Driver 5

Windows 2000

To accept the Software License Agreement, click

[Agree].

The installation destination screen appears.

Select the boot disk as destination volume and click

[Continue].

The installation type screen appears.

Click [Install] or [Upgrade].

The Authenticate screen appears.

Enter the administrator [Name] and [Password],

and click [OK].

The restart confirmation sheet appears.

Click [Continue Installation].

The installation begins. When the procedure is

finished, the following restart message appears.

Click [Restart].

The computer restarts and the installation is

complete.

After the computer has restarted, connect the

printer to the computer using a USB cable, and turn

power to the printer on.

After a while, the printer will be automatically

recognized and available for use.

Installing the Printer Driver 6

Windows 2000

To verify that the printer is ready for use, bring up the

Printer List in the Printer Setup Utility. If the model

name of your UP-CX1 series printer is shown in the list,

the printer can be used.

To start the Printer Setup Utility, open [Applications] -

[Utilities] - [Printer Setup Utility].

Note

In Mac OS X 10.4.x, you can also check the Printer List

from [Print and Fax] under System Preferences.

If the printer is not recognized automatically, make the

setting manually as follows.

Using Mac OS X 10.4.x

Open [Applications] - [Utilities] - [Printer Setup

Utility].

The Printer List screen appears.

Click the [Add] button.

The Printer Browser screen appears.

You can also bring up the Printer Browser screen by

clicking the [+] button in [Print and Fax].

Select the printer with your printer name in [Printer

Name] and “USB” in [Connection].

For [Print Using], select “SONY UP-CX1 series

printer”, and click the [Add] button.

The printer is now available for use.

Using Mac OS X 10.3.x

Open [Applications] - [Utilities] - [Printer Setup

Utility].

The Printer List screen appears.

Using More Than One Printer 7

Windows 2000

Click the [Add] button.

The following screen appears.

In the popup menu, select [USB].

Select the printer with your printer name in

[Product] and “Sony” in [Type]. Select “SONY UP-

CX1 series printer” for [Printer Model]. Then click

the [Add] button.

The printer is now ready for use.

Using More Than One

Printer

Installation Procedure

If more than one UP-CX1 series printer is to be

connected to the computer, perform the installation

procedure for the second and subsequent printers as

described below.

The installation for the first printer must have been

completed correctly, as described in the preceding

section.

The explanation below applies for installing the second

printer.

Using Mac OS X 10.4.x

Connect to the computer the UP-CX1 series

printers for which installation has been completed.

If more than two UP-CX1 series printers have

already been installed, connect them all to the

computer.

Turn power to all connected printers on.

Open [Applications] - [Utilities] - [Printer Setup

Utility].

Verify that all connected UP-CX1 series printers

are shown in the Printer List.

Using More Than One Printer 8

Windows 2000

Connect the printer to be added to the computer,

and turn power to that printer on.

After a while, the connected printer will be

automatically recognized and added to the Printer

List.

When the printer is added to the list, the installation

is complete.

You can also check the Printer List from [Print and Fax]

under System Preferences.

Using Mac OS X 10.3.x

Connect to the computer the UP-CX1 series

printers for which installation has been completed.

If more than two UP-CX1 series printers have

already been installed, connect them all to the

computer.

Turn power to all connected printers on.

Open [Applications] - [Utilities] - [Printer Setup

Utility].

Verify that all connected UP-CX1 series printers

are shown in the Printer List.

If there is already a printer with the same name as

the printer to be added, change the name of the

existing printer. For example, if the new printer is

“UP-CX1” and there is already a “UP-CX1” in the

Printer List, change the name of that printer as

follows.

1Select the printer for which the name should be

changed in the Printer List, and click the [Show

Info] button.

2Enter the new name in the [Printer Name] field,

and click the [Apply Changes] button.

Connect the printer to be added to the computer,

and turn power to that printer on.

After a while, the connected printer will be

automatically recognized and added to the Printer

List.

When the printer is added to the list, the installation

is complete.

Uninstalling the Printer Driver 9

Windows 2000

Uninstalling the Printer

Driver

Uninstallation Procedure

To uninstall the printer driver, proceed as follows.

Shut down all running applications.

Turn power to all UP-CX1 series printers connected

to the computer off and disconnect the USB cables.

Open [Applications] - [Utilities] - [Printer Setup

Utility].

The Printer List screen appears.

Select the printer model that you want to uninstall

in the Printer List and click the [Delete] button.

Perform this operation for all printers of the same

type that you want to uninstall.

(In Mac OS X 10.4.x, you can also select the printer

in the Printer List of [Print and Fax] under System

Preferences and delete the printer by clicking the

[-] button.)

Open [Library] - [Receipts].

Move [UP-CX1Series.pkg] to the trash.

Open [Library] - [Printers] - [SONY] - [UP].

Move the files [UPCX1PM.plugin] and

[UPCX1PrintColorSetup.plugin] to the trash.

In the [Finder] menu, select [Empty Trash].

The printer driver is now uninstalled.

Making Page Settings 10

Windows 2000

Making Page Settings

Before printing from an application, you should make

the required page attribute settings.

Page attributes include the printer to use, the paper size,

the paper orientation, and scale settings.

From the [File] menu in the application, select Page

Setup.

The Page Attributes sheet appears.

Select the printer to use from the [Format for] list.

For [Paper Size], select either [UPC-C13], [UPC-

C14], [UPC-C15], or [UPC-C48PF], depending on

the paper size inserted in the printer.

If another setting is selected, printing will not be

possible.

The maximum print area size according to the

[Paper Size] setting is as follows.

Select the desired paper [Orientation] setting.

Select the desired [Scale] setting when wishing to

enlarge or reduce the image while printing.

When the settings have been made, click the [OK]

button.

Paper Size Maximum print area

UPC-C13 1,536 ×1,100 (pixels)

UPC-C14 1,848 ×1,248 (pixels)

UPC-C15 2,148 ×1,536 (pixels)

UPC-C48PF 2,448 ×1,248 (pixels)

Otros manuales para UP-CX1 series

Tabla de contenidos

Otros manuales de Software de Sony

Sony

Sony DCR-IP5 MovieShaker v3.1 Manual de usuario

Sony

Sony ERS-210 AIBO Dancer Manual de usuario

Sony

Sony PEG-N610C Memory Stick Gate v2.1 Manual de usuario

Sony

Sony NWZ-A815BLK - 2gb Digital Music Player Manual de usuario

Sony

Sony PEG-N610C MS Import/MS Export Manual de usuario

Sony

Sony Walkman D-NE319 Guía de solución de problemas

Sony

Sony Network Camera Recorder V 1.0 Manual de usuario

Sony

Sony SRW5800/2 Manual de usuario

Sony

Sony Micro HI-FI Component System Guía de instalación

Sony

Sony PlayStation 3 (Uncharted: Drake's Fortune Limited Edition... Manual de instrucciones

Sony

Sony CLIE PEG-UX40 Manual de usuario

Sony

Sony HDR-SR5/C Guía

Sony

Sony MZ-N1 Guía de inicio rápido

Sony

Sony MZ-M10 Manual de usuario

Sony

Sony VGF-AP1L - Vaio Pocket Digital Music Player Guía de solución de problemas

Sony

Sony ICD-CX50 - Visual Voice Recorder Manual de usuario

Sony

Sony MDS-PC3 Manual de usuario

Sony

Sony MZ-N1 Manual de usuario

Sony

Sony VRD-MC1 Nero 6 Manual de usuario

Sony

Sony VGN-TX850P Manual

Sony

Sony ERS-311 AIBO Life Manual de usuario

Sony

Sony MZ-N10 Manual de usuario

Sony

Sony PEGA-GC10 Manual de usuario

Sony

Sony MEX 1GP - Giga Panel Radio Manual de usuario

Manuales populares de Software de otras marcas

COMPRO

COMPRO COMPROFM Manual de usuario

Muratec

Muratec OFFICEBRIDGE ONLINE Manual de usuario

Oracle

Oracle Contact Center Anywhere 8.1 Manual de usuario

Adobe

Adobe 65007312 - Photoshop Lightroom Manual

Avaya

Avaya NULL One-X for RIM Blackberry Manual de usuario

HP ProLiant BL420c Manual de usuario

PS Audio

PS Audio PowerPlay Manual del propietario

Brady

Brady LOCKOUT PRO 3.0 Manual de servicio

Avaya

Avaya Interaction Center Manual de usuario

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manual

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manual de usuario

Oracle

Oracle Application 9i Manual de usuario

Acer

Acer RDM Manual de usuario

Canon

Canon Vixia HF21 Manual de usuario

Canon

Canon ZR950 Manual de usuario

Samsung

Samsung Auto Backup Manual de usuario

Polycom

Polycom Vortex EF2201 Instrucciones de instalación y funcionamiento

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manual de usuario