Sony SLT-A35 Manual de usuario

Interchangeable Lens

Digital Camera Preparing the camera

Before your operation

Shooting images

Using the shooting function

Using the viewing function

Changing your setup

Viewing images on a

computer

Printing images

Others

index

,., uo_ ol

Additional infbrmation on this product and ]

answers to f]cequently asked questions can be

iound at our Customer Support Website.

http://www.sony.net/

Printed using VOC (\¢)latile Organic

Compound) fl'ee vegetable oil based ink.

4281650110

With a flash that has a wireless shooting function (sold separately), you can

shoot with the flash without a cord, even when the flash is not attached to

the camera. By changing the position of the flash, you call shoot all image

with a three dimensional feel by highlighting the contrast of light and

shadow' on the subject.

For the actual steps of shooting, refer to the operating instructions of the

flash.

1AttachthewirelessflashtotheAuto-lockAccessoryshoeand

turnboththecameraandtheflashon.

2 Fnbutton--+ $(FlashMode)--+ _(Wireless)

3 RemovethewirelessflashfromtheAuto-lockAccessoryshoe

andpopupthebuilt-inflash.

• If you pert_rm it test fire of the flash, press the AEL button.

Notes

• The camera cannot carr_ out the wireless lighting ratio control.

• Turn off the wireless flash mode afler wireless flash shooting. If the built-in flash is

used while the wireless flash mode is still active, inaccurate flash exposures will

result.

• Change the channel of the external flash when another photographer is using a

wireless flash nearby and his/her built-in flash light causes your external flash to fire.

To change the channel of the external flash, rellzr to the operating instructions

supplied with it.

Setupof the AELbutton

When using a wireless flash, it is recommended that you set [AEL button]

to [AEL hold] in the _ Custom menu (page 148).

102

Adjustingthe brightnessof the image

(Exposure,Flashcompensation,

Metering)

When shooting into the stm o1"by a window, the exposure may not be

appropriate for the subject because of the big difference ill lighting between

the subject and the backgrotmd. [n such cases, use the light meter where the

subject is bright enough and lock the exposure before shooting. To reduce

the brightness of the subject, point the camera forwards a spot that is

brighter thau the subject and use the light meter to lock the exposure of the

entire image. To make the subject brighter, point the camera forwards a

spot that is darker than the subject and use the light meter to lock the -_.

exposure of the entire image.

This section describes how' to shoot a brighter image of the subject using _="

the [] (Spot). _-

The spot where you

lock the exposure. _,

1Fnbutton--, [] (MeteringMode)--, [] (Spot)

2 Adjustthefocusontheportionyouwanttolocktheexposure.

The exposure is set when the focus is achieved.

103

3PresstheAELbuttontolockthe

exposure.

"g" (AE lock mark) appears.

AEL button

I.I ,,.o ...... I I

4WhilepressingtheAELbutton,focusonthesubject,andshoot

thesubject.

• If you continue to shoot with the same exposure value, press and hold the

AEL button after the shooting. The setting is canceled when the button is

released.

Except for exposure mode M, the exposure is automatically selected

(Automatic exposure).

Based on the exposure acquired by the automatic exposure, you call

perform exposure compensation by shifting the exposure to either the +

side or the - side, depending on your preference. You can make the entire

image brighter by shifting to the + side. The entire image becomes darker

when you shift it to the - side.

Adjust in the - Baseexposure Adjust in the +

direction direction

104

1Pressthe[] button. [] button

2 Adjusttheexposurewiththe

controldial.

Toward + (over): Brightens an image.

Toward (under): Darkens an image. .......i!i!i!i!i!.......!!!!!.......i!i!i!i!i!.......

11125 F3.5 -_.,_'1,,2. _

Standard exposure

3 Adjustthefocusandshootthesubject.

:::::::::::::::::::::::::::::::.....

--,-.

• Adjust the compensation level by checking the recorded image.

• Using bracket shooting, you can shoot multiple images with the exposure _"

shifted to the plus or minus sides (page 121).

Note =

•This item cmmot be set vvrhenthe exposure mode is set to AUTO, AUTO+, or Scene

Selection.

Toshootwhilecheckingthescreenusingthehistogram

The histogram displays the luminance

distribution that shows how' many pixels

of a particular brightness exist in the

picture. _ iiiii!i!i!!!!!!!!!!_!

Dark Light

105

MENUbutton--, _2--, [Histogram]--, [On]

• [nstead of the Graphic Display, the histograru is displayed after you press

DISP on the control button several tirues.

The exposure compensation will change

the histogram accordingly. The right

illustration is all example.

Shooting with the exposure

compensation on the positive side

brightens the whole picture, making the

entire histogram shift to the bright side

(right side). If the exposure compensation

is applied on the negative side, the

histogram will shift to the other side.

Both ends of the histogram show' a high-

key or low-key portiom You cannot

restore these areas with a computer later.

Adjust the exposure if necessary and

shoot again.

Holes

• The histogram does not indic_te the final recorded im_ge. It iudic_tes the condition

of the image just monitored on the screen. The histogram will difllzr based on

aperture setting, etc.

• The histogram dif[izrs between shooting and playback in the following situations:

When firing the flash.

When the subject has low intensity, such as night scenery.

When shooting with the flash, you can adjust the amount of flash light

alone, without changing the exposure compensation. You can only change

the exposure of a main subject which is within the flash range.

106

Fnbutton--+ [] (FlashCompensation)--+Selectthedesired

setting

Toward +: Makes the tqash level higher.

Toward : Makes the tlash level lower.

Roles

• This item cannot be set when tile exposure mode is set to AUTO, AUTO+, Sweep

Panorama, Scene Selection, or Pictm'e Effect.

• The higher flash eflect may not be visible due to the limited amount nf flash light, if

the subject is outside the maximum range of tile flash, lfthe subject is very close, the

lower flash ef[_ct may not be visible.

Exposure compensalion and flash compensalion

Exposure compensation changes tile shutter speed, aperture, and 1SO sensiti'vity (when

[AUTO] is selected) to perform tile compensation.

Flash compensation only changes the amount of flash light.

MENUbutton--_ a 2--_ [Flashcontrol]--_ Selectthedesired

setting

ADI flash This method controls the lighting of the tqash, factoring in tile

focus distance inlormation and light metering data frnm tile

preqlash. This method enables an accurate tqash

compensation with virtually no effect frnm the reflection nff

the suhject.

Pro-flash TTL This method controls tile amount of llash light depending on

the data only from pre-tqash light metering. This methnd is

susceptible to tile reflection nff the subject.

ADI: Advanced Distance [ntegration

TTL: Through the lens

• When [ADI flash] is selected, using a lens that is provided with a distance

encoder feature can perform more accurate flash compensation by using

more accurate distance information.

1,...

€/a

}

107

Notes

• When the distance between the subject and the external flash (sold separately)

cannot be determined (wireless flash shooting using an external flash (sold

separately), shooting with an off-camera l]ash using a cable, shooting with a macro

twin flash, etc.), the camera automatically selects Pre-flash TTL mode.

• Select [Pre-flash TTL] in the following cases, as the camera cammt perli)rm flash

compensations with AD1 flash.

A wide panel is attached to the HVL-F36AM flash.

A diffuser is used for flash shouting.

A filter with an exposure factor, such as an ND filter, is used.

A close-up lens is used.

• AD1 flash is only available in combination with a lens that is provided with a

distance eucoder. To determine if the lens is equipped with a distance eucoder, reflzr

to the operating instructions supplied with the lens.

Fnbutton---,_(MeteringMode)---,Selectthedesiredmode

(Multi segment) This mode measures light on each area al:er dividing the total

area into multiple areas and determines the proper exposure

of the entire screen.

IZ_l(Center weighted) While emphasizing the central area of the screen, this mode

measures the average brightness of the entire screen.

[] (Spot) This mode measures light only in the spot metering circle

located in the center area.

• Use [Multi segment] metering for general shooting.

• When there is a high contrast subject in the AF area, measure the light of

the subject you want to shoot with the optimal exposure using the spot

metering function and take advantage of an AE lock shooting (page 103),

Note

• When the exposure mode is set to AUTO. AUTO+. Scene Selection, or Picture

Effi_ct. [Metering Mode] is fixed to [Multi segment] and you cannot select other

modes.

108

Setting ISO

Sensitivity to light is expressed by the [SO number (recommended

exposure index). The larger the number, the higher the sensitivity.

1PressISOonthecontrolbuttonto

displaytheISOscreen.

2 Selectthedesiredsettingwith,L_ onthecontrolbutton.

•The larger the number, the higher the noise level.

• If you select [Multi Frame NR], select the desired value with 411_. e'-

€/a

Rotes _-

• When tile exposure mode is set to AUTO. AUTO+, Sweep Panorama, Scene _.

Selection. or Piclure Effect, 1SO is lixed to AUTO and you cannol select other 1SO

nl.n nl3el's. _i

• When tile exposure mode is set to P/A/S and IS() is set to [AUTO], IS() is

automatically set between ISO 100 and ISO 1600. _"

• Tile [AUTO] setting is nol provided in exposure mode M. If you change the

exposure mode to M with file [AUTO] setting, it is switched lo [100]. Set the 1SO

according to your shooting conditions.

Multiframenoisereduction(MultiFrameNR)

The camera automatically shoots multiple images continuously, combines

the images, reduces the noise, and records one image. In Multi Frame NR,

you can select larger [SO numbers than the maximum [SO sensitivity.

The image recorded is one combined image.

Roles

• Press and hold the shutter Button until the continuous shooting stops.

• When [linage: Quality] is set to [RAW] or [RAW & JPEG], this function cannot be

used.

• The flash, D-Range optimizer, and [Auto HDR] cannot be used.

109

Compensatingforthe brightnessand

contrastautomatically(D-Range)

D-RANGEbutton--+ Selectthe

desiredsetting D-RANGE button

(O|l) Does not use the DRO/Auto HDR flmctions.

(D- By dividing the image into small areas, the camera analyses

RangeOptimizer) the contrast of light and shadow between the subject and the

background, producing the image with the optimal brightness

and gradation.

(Auto HDR) Shoots three images with different exposures, and then

overlays correctly exposed image, the bright areas of an

under exposed image and the dark areas of an over exposed

image to create an image with rich gradation.

Two images are recorded: an image with the correct exposure

and an overlaid image.

Note

• You can assign another function to Ihe [)-RANGE button <page 149). If you have

already assigned another function to it, select [DRO/Aulo HDR] using lhe Fn bulton.

110

Otros manuales para SLT-A35

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cámara digital de Sony

Sony

Sony DSLR-A230 Manual de usuario

Sony

Sony Cyber-shot DSC-HX300 Manual de usuario

Sony

Sony DSC-T100/R - Cyber-shot Digital Still Camera Manual de usuario

Sony

Sony DSC-H90 Manual de usuario

Sony

Sony DSC-TX7 - Cyber-shot Digital Still Camera Manual de usuario

Sony

Sony SLT-A58 Manual de usuario

Sony

Sony Cyber-shot DSC-TF1 Manual de instrucciones de instalación

Sony

Sony MPK-THGB Manual de usuario

Sony

Sony NEX-F3K/B Manual de usuario

Sony

Sony SLT-A58K Manual de usuario

Sony

Sony Playstation Eye Manual de usuario

Sony

Sony Alpha 230 Manual de usuario

Sony

Sony Alpha 7RV Guía del usuario

Sony

Sony PHV-A7 Manual de usuario

Sony

Sony DSC-HX400 Guía de referencia

Sony

Sony ILCE-7S Manual de usuario

Sony

Sony Cyber-shot 3-294-900-61(1) Manual de usuario

Sony

Sony NEX-5N Manual de usuario

Sony

Sony MHS-PM1/V - Webbie Hd™ Mp4 Camera Manual de usuario

Sony

Sony Multi Functional Digital Camera Manual de usuario

Sony

Sony Cyber-shot DSC-WX50 Manual de usuario

Sony

Sony DSC-HX1 Cyber-shot® Manual de usuario

Sony

Sony DSC-HX100V/B Manual de usuario

Sony

Sony MHS-TS55 Manual de usuario

Manuales populares de Cámara digital de otras marcas

Mercury

Mercury 350K Manual de usuario

Pentax

Pentax Optio LS 465 Manual de usuario

Sanyo

Sanyo VPC-S1085 Manual de usuario

GE SMART A1255 Manual de usuario

Point Grey

Point Grey Gazelle Manual de usuario

Nikon

Nikon COOLPIX A Manual de usuario

Pentax

Pentax P-5 Manual de usuario

BlazeVideo

BlazeVideo A280 Manual de usuario

ATIK Cameras

ATIK Cameras One Manual de usuario

CohuHD Costar

CohuHD Costar 3930 Series Manual de usuario

Leica

Leica M10-R Manual de usuario

FujiFilm

FujiFilm FinePix A700 Manual de usuario

Lorex

Lorex LNZ81P25 Series Manual de usuario

GE J1470S Manual de usuario

Canon

Canon EOS ELAN7 Manual de usuario

Nikon

Nikon Coolpix 100 Manual de usuario

Samsung

Samsung SCC-C4253 Manual de usuario

JVC

JVC GT-HM890 Manual de usuario