Sony RMO-S551 Manual de usuario

SMO-F551 / RMO-S551

Magneto-Optical

Disk Drive

Installation Guide 1.3

SMO-F551 / RMO-S551 Installation Guide

Installation GuideInstallation Guide

Installation Guide

Contents

Installation Procedure on DOS and Windows3.1 3

Installation Procedure on Windows95/98 5

Installation Procedure on WindowsNT 7

Installation Procedure on SUN Systems 9

Installation Procedure on SGI Systems 11

Installation Procedure on HP Systems 15

Installation Procedure on SCO Systems 18

Appendix 19

Printing History

July 24, 1998 Version 1.1

March 1, 1999 Version 1.2

November 1, 1999 Version 1.3

Note:

SMO-F551 / RMO-S551 support many kind of MO media, but all kind of MO media can not

be used in each Operation System. (Refer page19 table-1,-2) Please choose suitable

MO media in accordance with supported media table.

SMO-F551 / RMO-S551 Installation Guide

Installation GuideInstallation Guide

Installation Guide

Installation Procedure on DOS and Windows3.1

Requirements:

1. SCSI host adapter

SCSI host adapter controls the command and data transfer between MO drive and host

computer. (Ex. AHA-2940, AHA-3940 of Adaptec)

2. Device driver

Device driver controls MO drive. Device driver is almost supplied with SCSI host

adapter. If you use RMO-S551, we recommend to use the “Formatter One Pro TM”

bundled with RMO-S551.

3. SCSI cable

SCSI cable is used for connecting host adapter and MO drive. Please select proper

SCSI cable.

4. Format utility software

Format utility software is used to format the media and make partitions. Format utility

software is often supplied with SCSI host adapter. (e.g. ASPI manager and ASPI driver

for AHA-29xx are provided from Adaptec) But if you use RMO-S551, we recommend to

use the “Formatter One ProTM” bundled with RMO-S551.

Installation:

1) Connection

- Set the SCSI host adapter into the host computer.

- Attach the MO drive to the SCSI host adapter using proper SCSI cable.

- Set proper SCSI ID and termination on the MO drive.

2) Install the device driver

- Turn on the MO drive and host computer.

- Install the device driver on DOS level or on Windows3.1 and reboot host computer.

3) Format the media and partition

- Format and Label the media using a format utility tool, such as “Formatter One ProTM”.

SMO-F551 / RMO-S551 Installation Guide

Installation GuideInstallation Guide

Installation Guide

Note:

- DOS and Window3.1 limit one partition size to 2.1GB. Please make a partition under

2.1GB per partition.

- “Formatter One ProTM” supports all kind of MO media (4.1GB, 4.8GB, 5.2GB), but some

device driver does not support 4.8GB or 5.2GB media. Please confirm the proper media

before using the device driver. If you have any questions, please contact your dealer of

the device driver.

- DOS and Windows3.1 do not support WORM media.

- Before rebooting a host PC, please don’t replace other media of a different sector size.

SMO-F551 / RMO-S551 Installation Guide

Installation GuideInstallation Guide

Installation Guide

Installation Procedure on Windows95/98

Requirement:

1. SCSI host adapter

SCSI host adapter controls the command and data transfer between MO drive and host

computer. (Ex. AHA-2940, AHA-3940 of Adaptec) Most of SCSI host adapters are

supported by Windows95/98.

2. Device driver

Device driver controls MO drive. Windows95/98 encloses the device driver on

installation CD-ROM or floppy disk. If you use RMO-S551, we recommend to use the

“Formatter One ProTM” bundled with RMO-S551.

3. SCSI cable

SCSI cable is used for connecting host adapter and MO drive. Please select proper

SCSI cable.

4. Format utility software

Format utility software is used to format the media and make partitions. Format utility

software is often supplied with SCSI host adapter. If you use RMO-S551, we

recommend to use the “Formatter One ProTM” bundled with RMO-S551.

Installation:

1) Connection

- Set the SCSI host adapter into the host computer.

- Attach the MO drive using proper SCSI cable.

- Set proper SCSI ID and termination on the MO drive.

2) No device driver

2)-1 Preparation

- Turn on the drive and insert the media.

- Turn on the power of the host system and boot Windows95/98.

2)-2 To detect the connected hardware

- Click the Start button, point to Setting, a system and boot Windows95/98.

- Click Add New Hardware icon.

- Follow the instructions on display

2)-3 Format and Label the media

- Double-click My Computer icon to view various drive icons.

- Highlight the Removable drive icon

- Point on File, and click Format option to initialize and label media.

SMO-F551 / RMO-S551 Installation Guide

Installation GuideInstallation Guide

Installation Guide

3) Install the device driver

3)-1 Preparation

- Turn on the MO drive and host computer.

- Install the device driver on Windows95/98 and reboot the host computer. (Please refer

to the user’s guide of the Device Driver)

3)-2 Format the media and partition

- Format and Label the media using format utility software, such as “Formatter One Pro

TM”.

Note:

- Windows95/98 limits one partition size to 2.1GB, please make a partition under 2.1GB

per partition.

- Don’t use floppy format for 4.8GB and 5.2GB Media, because the partition size is over

2.1GB.

- “Formatter One ProTM” supports all kind of MO media (4.1GB, 4.8GB, 5.2GB), but some

device driver or native Windows95/98 system do not support 4.8GB or 5.2GB media.

Please confirm the proper media before using the device driver. If you have any

question, please contact your dealer of the device driver.

- Windows95/98 does not support WORM media.

- Before rebooting a host PC, please don’t replace other media of a different sector size.

SMO-F551 / RMO-S551 Installation Guide

Installation GuideInstallation Guide

Installation Guide

Installation Procedure on WindowsNT

Requirement:

1. SCSI host adapter

SCSI host adapter controls the command and data transfer between MO drive and host

computer. (Ex. AHA-2940, AHA-3940)

2. Device driver

Device driver controls MO drive. WindowsNT include the Device Driver. If you use

RMO-S551, we recommend to use the “Formatter One Pro TM” is supplied with RMO-

S551.

3. SCSI cable

SCSI cable is used for connecting host adapter and MO drive. Please select proper

SCSI cable.

4. Format Utility software

Format utility software is used to format media and make partitions. Format utility is

often supplied with SCSI host adapter. If you use RMO-S551, we recommend to use the

“Formatter One ProTM” bundled with RMO-S551.

Installation:

1) Connection

- Set the SCSI host adapter into the host computer.

- Attach the MO drive using proper SCSI cable.

- Set proper SCSI ID and termination on the MO drive.

2) No device driver

2)-1 Preparation

- Turn on the drive and insert the media.

- Turn on the power of the host system and boot WindowsNT.

- Let it Autoconfigure the hardware.

2)-2 Format the media and partition

a) Click the Start button and point to Program “Administrative Tools”.

Click on Disk Administrator

- Verify to write signature to the media.

- Highlight the drive icon to be partitioned.

- Click on File, then Create Partition

- Choose partition parameters and click OK.

- Close Disk Administrator....save changes when asked.

SMO-F551 / RMO-S551 Installation Guide

Installation GuideInstallation Guide

Installation Guide

b) Click on Disk Administrator again

- Highlight the partitioned drive icon.

- Click on Tools, then Format.

Choose format type (see Notes) and volume label name.

- Format the media.

- Close Disk Administrator.

3) Install the device driver

3)-1 Preparation

- Login WindowsNT

- Install the device driver on WindowsNT and reboot the host computer. (Please refer to

the user’s guide of the Device Driver)

3)-2 Format the media and partition

- Format and Label the media using format utility software, such as “Formatter One Pro

TM”.

Note:

- There are two format types that Disk Administrator supports.

1) FAT: allows media to be removed easily.

2) NTFS: ‘locks’ the media into the drive.

- “Formatter One Pro TM” support only FAT16 file system. If you would like to use NTFS

file system, please use disk administrator after logining as administrator.

- “Formatter One ProTM” supports all kind of MO media (4.1GB, 4.8GB, 5.2GB), but some

device driver or native WindowsNT system do not support 4.8GB or 5.2GB media.

Please confirm the proper media before using the device driver. If you have any

question, please contact your dealer of the device driver.

- When you format 4.8GB or 5.2GB media using disk administrator, please select NTFS

file system.

- WindowsNT does not support WORM media.

- Before rebooting a host PC, please don’t replace other media of a different sector size.

SMO-F551 / RMO-S551 Installation Guide

Installation GuideInstallation Guide

Installation Guide

Installation Procedure on SUN System

Test equipment:

The following procedure was confirmed with the following system and drive combination:

Host: SUN Ultra Enterprise 450

OS: Solaris 2.3, Solaris 2.4, Solaris 2.5.1, Solaris 2.6

Target: RMO-S551

- device type is set to 0

- 512 byte/sector media is used.

Since the SCSI driver “sd” which comes with the SUN’s UNIX system is for device type 0

(hard disk drive, in general), the cases with device type 7 or 1024 bytes/sector media are

not supported.

Installation:

1) Connection

- Set the SCSI host adapter into the host computer using proper SCSI cable.

- Set proper SCSI ID on the MO drive.

- Set proper termination.

- Set the Device Type 0.

2) Login

- Turn on the MO drive and the host computer.

- Login as root or be a super user with “su” command.

3) Format and partition

To make a disk accessible, perform the following three command:

- ‘format’: using to format media.

- ‘newfs’: using to make file system.

- ‘mount’: using to mount media.

Create a ‘format.dat’ file prior to issuing the ‘format’ command

4) Edit “format.dat” file

- add following configuration to the “format.dat”.

# This is a list of sample Sony 5.25 inch MO disk configurations.

disk_type = "ISO 4X MO disk, 1150MB" ¥

: ctlr = SCSI : fmt_time = 2 ¥

: ncyl = 2261 : acyl = 2 : pcyl = 2263 : nhead = 32 : nsect = 31¥

: rpm = 3600 : bpt = 15872

disk_type = "ISO 8X MO disk, 2035MB" ¥

SMO-F551 / RMO-S551 Installation Guide

Installation GuideInstallation Guide

Installation Guide

: ctlr = SCSI : fmt_time = 2 ¥

: ncyl = 4003 : acyl = 2 : pcyl = 4005 : nhead = 32 : nsect = 31 ¥

: rpm = 3300 : bpt = 15872

# This is a list of sample partition tables for Sony 5.25 inch MO disk.

partition = "ISO 4X MO disk, 1150MB" ¥

: disk = "ISO 4X MO disk, 1150MB" : ctlr = SCSI ¥

: 0 = 0 , 0 : 1 = 0, 0 : 2 = 0, 2242912 :

partition = "ISO 8X MO disk, 2035MB" ¥

: disk = "ISO 8X MO disk, 2035MB" : ctlr = SCSI ¥

: 0 = 0 , 0 : 1 = 0, 0 : 2 = 0, 3970976 :

Note:

- SUN System supports only 512 byte/sector MO media, you can use 2.3GB and 4.1GB

media. If you would like to use 1024 byte/sector or 2048 byte/sector media, please use

a proper device driver software for SUN system.

Otros manuales para RMO-S551

Este manual sirve para los siguientes modelos

Otros manuales de Unidad de CD/CDR de Sony

Manuales populares de Unidad de CD/CDR de otras marcas

Philips

Philips CDD3610 Manual de usuario

QPS

QPS Que!Fire Manual de usuario

LG GCC-4241N Manual de usuario

Plextor

Plextor 12X-3 Guía

Samsung

Samsung SN-324B Manual de usuario

Teac

Teac CD-211E Manual de usuario

SmartDisk

SmartDisk Firewire CD-R/W Manual de usuario

Axis

Axis CD-ROM SERVER Manual de usuario

LG CRD-8322B Manual de usuario

Memorex

Memorex 32023234 - 52x32x52x External USB2.0 CD... Instrucciones de instalación

Yamaha

Yamaha CD Recordable/Rewritable Drive CRW3200 Manual de usuario

Panasonic

Panasonic KX-LD742 Manual de usuario

Pioneer

Pioneer BDR-S13U-X Manual de usuario

Panasonic

Panasonic LK-MC606BP Manual de usuario

Panasonic

Panasonic CF-VCW Series Manual de usuario

LG CRD-8320B Manual de usuario

Conner

Conner CFP2107 Series Manual de usuario

Plextor

Plextor 12-20C Guía