Sonos Move Manual de usuario
Move
Guides
Move
Overview Move is the durable, battery-powered
smart speaker for indoor and outdoor
listening—
Rechargeable battery lasts up to 10 hours. Easily
recharge by just setting Move on the charging base—no
plugs or extra wires required. For power on the go, use a
compatible USB-C charger (sold separately).
Weatherproof design is ideal for barbecues, pool parties,
and more.
Stream content over WiFi or Bluetooth®.
Freedom of control using the Sonos S2 or Sonos S1 app,
the touch controls on the speaker, or your voice.
Compatible with all your other Sonos speakers for multi-
room listening.
See Setup when you're ready to add Move to your Sonos
System.
Controls and lights
Volume control Touch and hold to quickly
change the volume.
Note: You can also use
the Sonos app and voice
control to adjust volume.
Play/Pause
Next/Previous
Note: You can’t skip
forward or go back when
listening to a radio station.
Volume up (right)
Volume down (left)
Press once to play or
pause music.
Press and hold to add
the music that’s
playing in another
room.
Swipe right to skip to
the next song.
Swipe left to go to the
previous song.
Microphone
Tap to turn the
microphone on or off:
Note: If you’ve installed a
voice service and the
microphone is off, you can
still use voice commands.
Just press and hold —
no need to start with a
wake word. When you
release the microphone
button, voice control turns
off again.
Status light
Displays the product's
connection to WiFi or
Bluetooth, indicates when
the volume is muted, and
signals errors. Learn more
When the microphone
light is on, voice
control and
microphone-dependent
features like auto
Trueplay are available.
When the light is off,
voice control and
microphone-dependent
features like auto
Trueplay are
unavailable.
Battery light
Indicates the battery
status:
Battery Saver: To save
battery life, you can set
Move to power off
automatically instead of
going to sleep. Go to >
System, and select Move.
It won't appear in the
Sonos app until it’s
powered back on.
Note: Move's remaining
battery life is always
visible in the Sonos app.
Note: If you don’t want to allow playback or volume adjustments using the speaker touch
controls, you can disable them in the room’s settings.
Blinking orange
indicates low battery.
Solid orange when it
starts charging. The
light may stay on for
several minutes
depending on how low
the battery is. The
battery will continue to
charge when the light
turns off.
Connector panel
1Power button Press to power on, short press to put
to sleep, long press (5 seconds) to
power off.
If Move is off the charging base, it
goes to sleep to save battery when
you’re not using it. Just press the
power button to wake it up.
2Join button Press to connect your Sonos system
during setup.
3Handle Allows for easy lifting and carrying so
you can take the speaker wherever
you go.
4Bluetooth/WiFi toggle button Toggles between Bluetooth and WiFi.
Use WiFi for setup, stream content
over WiFi or Bluetooth®.
5USB-C port Use a compatible USB-C charger for
charging on the go.
Note: USB-C cable not included.
6Charging dock (included) Set Move on the charging base for
easy recharging—no extra wires or
cables needed.
Select a location
You can put your speaker just about anywhere. For maximum performance, here's a few
guidelines:
The USB port may also be used
for diagnostic purposes. (It can’t
play large data files, like some
music files.)
Move sounds great even when placed next to a wall or on a shelf. For best performance,
leave at least 1" (2.5cm) space around the back of the speaker.
It’s ultra durable. With a tough outer shell and IP56 rating, Sonos Move is built to
withstand falls, bumps, moisture, dust, UV rays, and extreme temperatures. Just don’t
leave it out in a rainstorm, and remember that the included charging base is for indoor use
only.
When the microphone is on, the speaker tunes itself with automatic Trueplay for
amazing sound no matter where you are and what you’re listening to.
TM
Don’t use or store your Sonos Move upside down.
Bluetooth pairing
1. Turn Bluetooth on in your device settings.
2. Press the mode button on the back of Move to switch to Bluetooth.
3. Choose Move from the list of available devices in your Bluetooth settings. If it’s not there,
press and hold the mode button and choose Move from the list when it appears. You’ll
hear a confirmation tone when your device is paired with Move. They’ll automatically
connect next time you switch Move to Bluetooth.
Switch modes
Set Move up on your WiFi, then use the mode switch on the back of Move to switch between
Bluetooth and WiFi. When you use Bluetooth for the first time, you’ll need to pair Move with
your device. Put it into Bluetooth mode and your mobile device will automatically connect next
time.
Charging
Charging base
Just set Move on its charging base for
easy recharging—no extra wires or cables
needed.
Make sure the speaker is seated properly
in the base and the charging contacts are
touching.
Charging base is for indoor use only—be
sure to keep it dry.
Tip: Move’s remaining battery life is
always visible in the Sonos app.
USB-C port
For charging on the go.
Use a compatible USB-C charger (type C
PD power with 45W, 20V/2.25A)
Microphone on/off
The microphone is used for voice control and for microphone-dependent features like
Trueplay tuning. Press to turn the microphone on or off—the microphone LED light will let
you know when your voice assistant is listening.
When the microphone light is on:
When the microphone light is off:
Voice services
Use your voice to control your Sonos system with any voice-enabled Sonos product—play
and control content, turn the volume up or down, and more.
Note: Voice control isn’t supported in every country yet—this feature will be available as soon
as Sonos and a voice service launch together in your region.
If you set up a voice service, voice control is on and ready to respond.
Microphone-dependent features like Trueplay are available.
If you set up a voice service, voice control is off.
Microphone-dependent features like Trueplay are unavailable.
Sonos Voice Control: control your whole Sonos system with hands-free ease and
unmatched privacy. Sonos Voice Control comes ready to use—it only takes a few
seconds to add when you set up your speakers. More information
Amazon Alexa: you’ll need the Sonos app and the Alexa app with the Sonos skill
enabled. You’ll make some changes in both apps during setup. Learn more
Google Assistant: you’ll need the Sonos app and the Google Assistant app. You’ll make
some changes in both apps during setup. Learn more
Siri: you’ll need the Apple Home app. Add your AirPlay2-compatible Sonos speakers to
the Apple Home app and then use an iPhone, iPad, or Apple TV to ask Siri to play music
(currently limited to Apple Music). Learn more
Otros manuales para Move
2
Tabla de contenidos
Otros manuales de Oradores de Sonos
Sonos
Sonos PLAY:3 Manual de usuario
Sonos
Sonos PLAY:5 Manual de usuario
Sonos
Sonos Era 300 Manual de usuario
Sonos
Sonos Five Manual de usuario
Sonos
Sonos Five Manual de usuario
Sonos
Sonos PLAY:5 Manual de usuario
Sonos
Sonos One Manual de usuario
Sonos
Sonos Move Manual de usuario
Sonos
Sonos PLAY:5 Manual de usuario
Sonos
Sonos PLAY:1 Manual de usuario
Sonos
Sonos Era 300 Manual de usuario
Sonos
Sonos PLAYBASE Manual de usuario
Sonos
Sonos One Manual de usuario
Sonos
Sonos PLAY:1 Manual de usuario
Sonos
Sonos One Manual de usuario
Sonos
Sonos PLAY 2 gen 2 Manual de usuario
Sonos
Sonos Beam Manual de usuario
Sonos
Sonos Playbar Manual de usuario
Sonos
Sonos Roam Manual de usuario
Sonos
Sonos ARC Manual de usuario
