SOMFY Connect Manual de usuario
1 3/27/2015
Somfy Connect
#1870210
Control SOMFY RTS and SDN Motors using Lutron’s:
Radio RA2 (RA2)
Homeworks QS (HWQS)
Grafik Eye QS (GEQS)
Quantum
The Somfy Connect is configured using a software
application which requires a USB to RS485 adapter such as
Somfy Part Number 9015260 or equivalent
.
2 3/27/2015
Contents
1 Somfy Connect - Connector Description......................................................................................................... 3
2 General............................................................................................................................................................. 4
3 Control Options ............................................................................................................................................... 5
4 Hardware Setup ............................................................................................................................................... 6
5 Typical Hardware Setup to Configure Somfy Connect................................................................................... 6
6 Typical System Setups..................................................................................................................................... 7
7 Programming the Somfy Connect to RTS (URTSI)........................................................................................ 9
8 Programming the Somfy Connect for RA2 to SDN...................................................................................... 13
9 Retrieve or Delete Data ................................................................................................................................. 15
10 Changing the Default Configuration.......................................................................................................... 16
11 Creating Timed, Sunrise, and Sunset Events............................................................................................. 17
12 RTS Delay.................................................................................................................................................. 19
13 Entering Custom Coordinates.................................................................................................................... 20
14 Notes:......................................................................................................................................................... 21
3 3/27/2015
1 Somfy Connect - Connector Description
DC Jack: 2.1 X 5.5 mm. DC input 9 – 24 VDC.
oSomfy Connect, 100ma
oEach URTSI attached to 485 network, 25 ma
DB9, Male: RS232 input from Lutron Main Repeater or NWK
integration Device.
RJ45: RS485. Connects to the SDN or URTSI(s)
4 3/27/2015
2 General
•Please read this entire document prior to starting the programming of the Somfy Connect.
•This document assumes the reader is familiar with the programming of Somfy’s RTS (Radio Technology
Somfy) & SDN (Somfy Digital Network) Motors and Universal RTS Interface (URTSI).
•The Somfy Connect makes possible the control of Somfy’s RTS & SDN motors using Lutron equipment
including the iPhone and iPad apps.
•The Somfy Connect “maps” Lutron button presses to URTSI or SDN commands; it connects to the Main
Repeater (RA2) or NWK (HWQS, GEQS, and Quantum) via RS232, straight-thru.
•The NWK must be set to Monitor Button Presses (9600 baud).
•There are three types of manual control using the Lutron equipment:
oSingle: Each PICO, Keypad, Grafik Eye QS or Table Top push-button press has a specific function
such as UP, DOWN, STOP, etc.
oSequence: With each Lutron button press, commands are sequenced as follows:
UP/STOP/DOWN/STOP/UP, etc. The STOP command is skipped if not activated within 60 seconds
after an UP or DOWN command.
oGroup: Group is a 2-button operation and only works with Keypads, Grafik EYE QS and the Table-
Top controls. The user chooses a channel (RTS) or SDN address (e.g. a motor or group of motors),
and then selects RAISE or LOWER. A stop command is sent when the same or opposite direction
command is pressed within 50 seconds of the first press.
•The Somfy Connect can store up to a total of 300 button presses (“maps”). How the 300 maps are allocated
to the three manual control options is determined during installation and programming.
•The Somfy Connect can save 98 timed events, 99 Sunrise events and 99 Sunset events (Single Functions
Only).
•When using HomeWorks QS:
oThe NWK interface must be included into the system using the HWQS Designer Software
oThe Ethernet port cannot used as this (as of this writing) disables the serial port.
5 3/27/2015
3 Control Options
•Pico, Keypad, Table Top or Grafik Eye QS Single or Sequence Control: Any push-button can be assigned a
Single function or act as a Sequence control.
•Keypad, Table Top or Grafik Eye QS Group Control: Group Control is defined as a 2-button operation. The
user must pick the RTS channel or SDN Group/Motor Address button (Large Buttons) and then
Lower/Raise.
•Where supported by the Lutron equipment, both on-press and on-release actions of the Pico’s, Keypads,
Table-Tops and Grafik Eye QS can be assigned functions.
PICO
Table-Top
Keypad
Grafik Eye QS
For Keypad, Grafik-Eye QS, Table-Top and PICO control:
Single Control: Any push-button can be used and assigned a
command.
Sequence Control: Any push-button can be used.
Group Function: Large buttons select RTS Channels or SDN Single
Motor or Group Addresses. User must select a large button and then
Lower/Raise. PICO cannot be used as a Group Function Control.
6 3/27/2015
4 Hardware Setup
•In addition to the Somfy Connect you will need:
oA USB to RS485 adapter such as the B & B part: 485USBTB-2W-LW or equivalent.
oA standard Cat 5 cable.
oA straight-thru RS232 cable which must have one male DB9 and one female DB9 (included).
oAn URTSI for RTS installations.
•The Somfy Connect includes an RJ45 connector that is used to connect it to the URTSI or SDN Network. It
also includes a DB9 connector used to connect to the Lutron Main Repeater or NWK.
•In RTS applications, the URTSI can provide power to the Somfy Connect or vice versa. There is a 2.5 mm
DC power input jack on the Somfy Connect. Power is delivered over the Cat 5 cable. The power supply
shipped with the URTSI can be used and can power the Somfy Connect and up to 4 URTSI’s.
•In SDN applications, the Somfy Connect can get power from the SDN or from a power supply connected
directly to the Somfy Connect.
•The Main Repeater or NWK must be configured for 9600 baud.
5 Typical Hardware Setup to Configure Somfy Connect.
7 3/27/2015
6 Typical System Setups
Somfy Connect – Radio RA2 to RTS
Typical Hardware Setup
Lutron
Main
Repeater
Somfy
Connect
Notes:
- Main Repeater requires a 115 VAC outlet.
- Po er for Somfy Connect:
Option 1> Plug-in DC po er to Somfy Connect. Po er is carried over CAT5 to URTSI
Option 2> Connect po er to URTSI. Po er is carried over CAT 5 to Somfy Connect.
- The Main Repeater and Somfy Connect must be mounted ithin 50' of each other.
- Lo Voltage connection from:
1 > Main Repeater to Somfy Connect: standard straight-thru RS232 cable
2 > Somfy Connect to URTSI: Cat 5
- Somfy Connect includes configuration soft are used to map RA2 button presses to URTSI functions (e.g. UP/STOP/DOWN)
- M1 & M2 are RTS motors, they require 115 VAC via a standard outlet or can be hard- ired.
12
Grafik Eye QS
Lutron RF
PICO Keypad
ith R/L
URTSI
M1 M2
Electrical Closet RoomRoom
Table-Top
8 3/27/2015
9 3/27/2015
7 Programming the Somfy Connect to RTS (URTSI).
•The first step is to load the drivers for the USB to RS485 adapter. When complete, verify that the adapter is
listed under COM ports in Device Manager. Record the COM port that the adapter populates.
•Install the Somfy Connect Configuration software and start it. Uninstall any previous versions.
•The first screen will be:
•If you have a good communication link, the screen on the following page (RA2/HWQS to RTS) will appear.
If not, you will get an error message stating there is no response – you must successfully link to the Somfy
Connect before you can move on.
From the drop down menu, choose the COM
port that the USB to RS485 adapter is using and
then click Program Mode. Port Open signifies
that the Configuration Program has control of the
COM port. It does not mean a successful
connection to the Somfy Connect.
10 3/27/2015
•To start programming the Somfy Connect, the command strings of the Lutron devices must be known. Once
the Lutron system is installed and all devices are associated & activated, connect the Somfy Connect to the
Main Repeater using the RS232 cable. The URTSI does not need to be connected at this time – although it
can be.
•To program a map, click Listen and then press & release the Lutron push button you wish to map to a
function. The screen on the following page will appear. Your Input will be slightly different based on the ID
of your Lutron device.
•During the Listen Mode, the Frame Heading will flash “Listening” until the Lutron string is sent. If after one
minute no input has arrived, the Somfy Connect will exit the Listing mode and return to RUN mode.
These Frames indicates how the Somfy Connect is presently
configured:
•Type of Somfy Connect (default: RA2/HWQS to RTS)
•Number of each command type (default: 100/ea)
•To change Configuration settings, see section #10
Otros manuales para Connect
1
Tabla de contenidos
Otros manuales de Automatización del hogar de SOMFY
SOMFY
SOMFY LT80 H SEL Manual de usuario
SOMFY
SOMFY ST28WF Manual de instalación
SOMFY
SOMFY FTS Manual de usuario
SOMFY
SOMFY Sunea io Manual de usuario
SOMFY
SOMFY Connexoon Window RTS Instrucciones de funcionamiento
SOMFY
SOMFY sonesse 30 rts Manual de usuario
SOMFY
SOMFY TAHOMA RTS Guía de configuración rápida
SOMFY
SOMFY Universal Setting Cable Kit Manual de usuario
SOMFY
SOMFY TaHoma Manual de funcionamiento
SOMFY
SOMFY ilmo 50 S WT Manual de usuario
SOMFY
SOMFY Sonesse 40 PA Manual de usuario
SOMFY
SOMFY Home Motion Glystro Manual de usuario
SOMFY
SOMFY sonesse 30 rts Manual de usuario
SOMFY
SOMFY Sonesse 50 RTS Manual de usuario
SOMFY
SOMFY TaHoma Instrucciones de funcionamiento
SOMFY
SOMFY TaHoma Manual de usuario
SOMFY
SOMFY 4120 Manual de usuario
SOMFY
SOMFY IXENGO S Manual de usuario
SOMFY
SOMFY Irismo Plus Manual de usuario
SOMFY
SOMFY Connectivity kit Manual de usuario
