Soleus Air Soleus LX-100 LX-100 Manual de usuario

- Cooling

- Heating

- Dehumidifying

- Fan

Please read this owner’s

Manual carefully before

operating the unit.

TABLE OF CONTENTS

INTRODUCTION…………………………………………………………………

IMPORTANT SAFEGUARDS………………………………………………..….2

PACKAGE CONTAINS…………………………………………………………..2

NAMES OF PARTS……………………………………………………………….3

INSTALLATION BEFORE USE……………………………..….………………4

CONTROL PANEL AND VFD DISPLAY………….…..……………………….5

CONTROL PANEL

FUNCTIONS……………………………………………….6

OPERATION USING CONTROL PANEL………………………...….…..……7

OPERATION USING REMOTE CONTROLLER…………………………..…9

MAINTENANCE……………..……………………………….…..………………9

TECHNICAL

SPECIFICATIONS…………………………………….….…….10

DISCLAIMER……………………………………………………………………11

CONTACT INFORMATION…………………………………...………………11

WARRANTY……………………………………….………………………………….….…12

INSTALLATION OF THE VENTING KIT………….……………………….…….13

INTRODUCTION

Thank you for purchasing Soleus Air LX-120/100 portable air-conditioner. This unit is designed

for improving living and working comfort by providing cooling, dehumidifying and fan functions

only with a minimum installation required. With its quite operation and attractive design, you will

enjoy the convenience and comfort that this unit provides for many years to come.

When operating as an air conditioner, this unit is designed for spot cooling or cooling for a room

no larger than 400 square feet with the standard ceiling height.

The unit also has power outage auto reset function. The unit automatically returns to the original

setting after a power outage.

IMPORTANT SAFEGUARDS

Before you use your portable air conditioner, please read this operation manual carefully.

1) Never use or store gasoline or other flammable vapor or liquid near this unit.

2) Maintain at least 10” (25 CM) clearance space from this unit. Avoid air inlet or

outlet grilles from being covered or closed off.

3) The power supply must be properly grounded.

4) Do not use an adapter plug or extension cord.

5) Do not use the unit in the immediate surroundings of a bath, a shower or a

swimming pool.

6) Do not let children play near this unit.

PACKAGE CONTAINS:

Mobile Air Conditioner

Exhaust Duct (2)

Unit Terminal End (2)

Window Kit Adapter (2)

Remote Controller

AAA Batteries (2)

Window Kit - 3 Sliding Panels

Exhaust Outlet Wall Covers (2)

User Manual

NAMES OF PARTS

Exhaust Duct

Window Kits

INSTALLATION BEFORE USE

1) Exhaust Duct

When you use the unit as an air conditioner or a dehumidifier, the fresh outdoor air must

be directed to the unit and the hot air must be exhausted out of the room to complete the air

exchange. When the unit is operating on fan or heating models, no outdoor air exchange

takes place. You do not need to hookup the window kits and exhaust hose when you use the

unit as a fan or a heater.

a) Pull out of both ends of the exhaust ducts for approximately 6”.

b) Screw clockwise the exhaust ducts with one end to the terminal end and other end

to the window kit adapter.

c) Remove exhaust outlet wall covers from the back of the unit by screwing the covers

counter-clockwise before lifting them up.

d) Mount terminal ends of the exhaust hoses to the unit.

e) Open window or sliding door for approximately 5 inches (130 mm)

f) Adjust the length of the window kit to the same length of the window or the sliding

door. Use all three panels if necessary. Cut the window piece as needed to fit the

length of your window or sliding door. Make sure that both holes on the main piece

are not covered by other pieces.

g) Place the window kit to the window or sliding door. Close the window or door as

far as it goes.

h) Adjust the lengths of exhaust hose and affix the window kid adapters onto the holes

on the window kit.

NOTE: When using the window kit on a window or sliding door it will cause the window

or sliding door not to be properly closed and locked. Additional security measurements

should be taken

Wall Mount

1) Do not use window kit adapter. Mount the one end of the exhaust ducts onto holes

of 5” on the wall.

2) Using exhaust outlet wall covers to cover the holes in the wall when the unit is not

in use.

NOTE: In order to increase the efficiency, the exhaust ducts should be keeping as short and

straight as possible. It is not recommended to increase the manufacturer’s length of the

exhaust hose. This may impede or damage the unit.

CONTROL PANEL AND VFD DISPLAY

CONTROL PANEL

VFD DISPLAY

Control Panel Functions

1) Power On/Off Control

Starts or Stops the Unit

2) Mode Control

Select the functions of the unit for:

Fan Mode

Air Conditioning Mode

Heating Mode

Dehumidifying Mode

Auto Mode

3) Fan Speed Control

Select the fan speed for:

High

Medium

Low

The fan speed can be visually distinguished by the speed of the digital air segments progressing

out from the windmill fan image on the VFD display.

4) Temperature

Select the desired temperature by pressing either ∧or ∨ key when using the unit in cooling or

heating function. The VFD flashes to displays the desired temperature during the setting. The

VFD displays set temperature when it is not at temperature setting mode.

The VFD display either in Celsius or Fahrenheit. Press /\ and \/ keys simultaneously to change

the display from Celsius to Fahrenheit or vice verse.

5) Timer

To program the timer, press Timer On key until the VFD display shows a flashing “ ”.

Pressing either /\ or \/ keys to change the clock to the desired time for the unit being turned on.

Press Timer Off key and the VFD display will show a flashing “ ”. Pressing either /\

or \/ keys to change the clock to the desired time for the unit being turned off.

The light will flash for 3 seconds to activate the timer you programmed.

6) Swing

To start swinging air louvers horizontally by press SWING Button once. At the moment, ‘ ’

appears on VFD. To stop, press SWING again.

Vertical air flow direction can be adjusted manually.

OPERATION USING CONTROL PANEL

1) Cooling Operation

a) Install the exhaust ducts properly.

b) Plug the Power Cord to the power outlet.

c) Turn on the unit by pressing the On/Off Button on the control panel.

d) Press Mode Button until “ ” appears on the VFD display

e) Press the button ∧or ∨until the desired room temperature appears on the

VFD. The temperature ranges from 61oF-88 oF (16 oC-31 0C).

f) Select the fan speed by pressing the Fan Button.

NOTE: During hot days, the unit will cool off the room most efficiently by setting the temperature at the

lowest and the fan speed at the highest. Reducing the length of the exhaust duct and insulating the

exhaust duct and keeping direct sunlight to a minimum will also improve the cooling efficiency.

2) Dehumidifying Operation

a) Install the exhaust ducts properly

b) Plug the Power Cord to the power outlet.

c) Turn on the unit by pressing the On/Off Button on the control panel.

d) Press the Mode Button until the “ ” appears on the VFD display.

NOTE: The unit operates at low fan speed during dehumidifying. The unit cools room slightly during

the dehumidification.

Keep the windows and the doors closed to aid the effectiveness of the unit in removing the moisture from

the room.

NOTE: The unit will not perform dehumidification when the room temperature is lower than 61 degree.

3) Fan Operation

a) Plug the Power Cord to the power outlet.

b) Turn on the unit by pressing the On/Off Button on the control panel.

c) Press the Mode Button until “ ” appears on the VFD display.

d) Select the fan speed by pressing the Fan Button.

NOTE: When the unit is running on fan mode, the exhaust duct is inoperative and is not required.

4) Heating Operation

a) Plug the Power Cord to the power outlet.

b) Turn on the unit by pressing the On/Off Button on the control panel.

c) Press the Mode Button until “ “ appears on the VFD display.

d) Press the button ∧or ∨until the desired room temperature appears on the

VFD. The temperature ranges from 61 o F-88 o F (16 oC-31 oC).

e) Select the fan speed by pressing the Fan button. It is recommended to use

the low fan

NOTE: When the unit is running on heating mode, the exhaust duct is inoperative and is not required.

5) Auto Operation

a) Install the exhaust ducts properly

b) Plug the Power Cord to the power outlet.

c) Turn on the unit by pressing the On/Off Button on the control panel.

d) Press the Mode Button until the “ ” appears on the VFD display.

e) Select the fan speed by using FAN button.

During the AUTO model, the unit operates at heating mode when the room temperature is below 68 o F

degree. It operates at dehumidifying mode when the room temperature is between 68o F to 80o F degree.

It operates at cooling mode when the room temperature is above 80 degree. You may use the timer with

the AUTO mode.

6) Sleep Mode (This Mode is available when using Remote control )

a) The air conditioner is in operation

b) Press SLEEP Button, the “ ” appears on the VFD.

c) The fan motor of indoor unit runs in low speed

d) When in cooling mode, within the first two hours, the temperature will be increased 1℉

per hour. Then temperature will be keeping at 2℉higher than the originally set degree

for 6 hours. 6 hours later, temperature will return to the originally set degree.

e) When in heating mode, within the first 2 hours, temperature will be decreased 1℉per

hour. Then temperature will be keeping at 2℉Lower than the original degree for 6

hours.6 hours later, temperature will return to original degree you set.

g) When in dehumidify mode, the temperature will not be changed.

NOTE: When the room temperature is low and the indoor humidity is high, the condensate of the air

conditioner may not be discharged in time. Water will accumulate in the unit that leads to the unit stops

working automatically for a long time. (At the moment, the “ ” appears on the VFD display.) In

order to let your unit recover working quickly, you can pull out the “Drain Port” which is located in the

lower left bottom of the back of the unit. The condensate will be discharged several minutes after water

be drained. Please use at least 1.5 liter pan to catch the dripping water.

It is not advised to use continuous drain method when the room temperature is higher than 90℉.

OPERATION USING REMOTE CONTROLLER

The remote controller provided with the unit may operate this portable air conditioner. The remote

controller uses two - AAA batteries (provided). Install the batteries before using the remote controller.

REMOTE CONTROLLER

You can use the remote controller to do all the operations which can be done by the control panel. While

you can only set SLEEP mode from the remote controller, not the control panel.

The LCD displays on remote controller either in Celsius or Fahrenheit. Press + and - keys

simultaneously to change the display from Celsius to Fahrenheit or vice verse.

MAINTENANCE

Otros manuales para Soleus LX-100 LX-100

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Acondicionador de aire de Soleus Air

Soleus Air

Soleus Air PS08-01 Manual de usuario

Soleus Air

Soleus Air PE2-07R-62 Manual de usuario

Soleus Air

Soleus Air TM-PAC-08E3 Manual de usuario

Soleus Air

Soleus Air LX-140 NT Manual de usuario

Soleus Air

Soleus Air WM1-05M-01 Manual de usuario

Soleus Air

Soleus Air PH5-13R-32D Manual de usuario

Soleus Air

Soleus Air SG-PAC-12E1HP Manual de usuario

Soleus Air

Soleus Air SG-PAC-10E2 Manual de usuario

Soleus Air

Soleus Air HCC-C09H26-A Manual de usuario

Soleus Air

Soleus Air SG-WAC-15ESE-C Manual de usuario

Soleus Air

Soleus Air LX-140 Manual de usuario

Soleus Air

Soleus Air PA1-12R-32 Manual de usuario

Soleus Air

Soleus Air SG-PAC-08E3 Manual de usuario

Soleus Air

Soleus Air iCongo PSQ-08-01 Manual de usuario

Soleus Air

Soleus Air KFR/KFS Series Manual de usuario

Soleus Air

Soleus Air TTWM1-14H-01 Manual de usuario

Soleus Air

Soleus Air PH1-12R-03 Manual de usuario

Soleus Air

Soleus Air KC-45H Hoja de especificaciones

Soleus Air

Soleus Air SG-PTAC-09HPDA Manual de usuario

Soleus Air

Soleus Air GM-WAC-25ESE-C Manual de usuario

Soleus Air

Soleus Air KFHHP-22 Hoja de especificaciones

Soleus Air

Soleus Air KY-320 Manual de usuario

Soleus Air

Soleus Air KFHIP-09-OD Hoja de especificaciones

Soleus Air

Soleus Air PSX-08-01B Manual de usuario

Manuales populares de Acondicionador de aire de otras marcas

Spheros

Spheros CC 355 Manual de usuario

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE Manual de usuario

Panasonic

Panasonic CS-E12HKEW Manual de usuario

nedis

nedis ACMB1WT7 Manual de usuario

Samsung

Samsung AR KV Series Guía

Daikin

Daikin FCFV50A Manual de usuario

Fujitsu

Fujitsu Inverter ASBA30JFC Manual de usuario

Toshiba

Toshiba RAS-M10SMUV-E Manual de usuario

Daikin

Daikin FXLQ20MAVE Manual de usuario

Hitachi

Hitachi RAS-E24CAK Manual de usuario

CIAT

CIAT Magister 2 Series Guía

Bestron

Bestron AAC6000 Manual de usuario

Hisense

Hisense 7K Manual técnico

Frigidaire

Frigidaire FFRE0533S1E0 Manual de usuario

Samsung

Samsung AS09HM3N Manual de usuario

Frigidaire

Frigidaire CRA073PU11 Manual del propietario

McQuay

McQuay MCK020A Manual de usuario

Webasto

Webasto Frigo Top 25 DS Manual de usuario