SMC Networks EZ Connect SMC2652W Manual de usuario

EZ Connect™

Wireless Access Point

User Guide

SMC2652W

V1.0

USER GUIDE 2652W_UK.qxd 5/4/01 11:08 am Page 1

Hello and welcome! - NEW TEXT??

The SMC EZ Connect Network Kit contains everything you need to

quickly and easily connect computers in your home or office

together to form your own network or extend and improve your

existing network.

The SMC EZ Connect Network Kit continues the SMC Home and

Small Office network range and offers the fastest performance out

of all of the products.

We know that you want to get started, but before you go any

further and start plugging things in, please read through this

manual as it will make the installation as easy to understand as

possible.

Simply follow the A,B,C steps and you will be up and running very

quickly.

Thank you for choosing SMC for your networking requirements. For

more information on the rest of the SMC Home and Small office

networking range either view the brochure contained on the CD or

go to www.smc-europe.com for full information and support.

Operating systems

This network kit is compatible and comes with drivers for the

following operating systems:

•Microsoft Windows for Workgroup 3.11,

•Microsoft Windows (r) 95 /98 /NT /2000,

•Netware 4.11,,5.0,FreeBSD 2.2.x,3.0,Linux,

•MAC OS v8.51 or higher

•SCO Unixware 7

It is not necessary that both PCs run the same operating system.

Computer

A PC or Power Macintosh with an available PCI slot.

Package Checklist:

1 x EZ Connect Wireless Access point - SMC2652W

1 x Antenna (dipole, omni-directional)

1 x DC power adapter

1 x Software CD (contains software drivers, utility and manual)

1 x User guide

Description

SMC’s EZ connect Wireless Access point serves as a media access

control (MAC) bridge between your wired Local area network (LAN)

and one or more wireless Local Area Networks (WLAN’s)

Just attach the access point anywhere along your Ethernet LAN to

provide wireless stations within it’s area of coverage with

transparent access to the local wired and wireless LAN.

The EZ connect wireless Access Point supports an 11Mbps

half-duplex connection to Ethernet networks for each active

channel. It is fully compliant with 2.4Ghz DSSS CSMA/CA wireless

networking as defined in IEEE802.11b and 10Mbps Ethernet as

defines in IEEE 802.3.

English

USER GUIDE 2652W_UK.qxd 5/4/01 11:08 am Page 3

System requirements

Before you install the EZ Connect Wireless Access point, be sure

you can meet the following requirements:

•An AC power outlet (100-240V, 50-60Hz)

•An available RJ45 port on a 10Base-T Ethernet hub or switch.

•802.11 compliant wireless Ethernet adapters with TCP/IP

compatible protocol installed.

•Web browser for configuration.

Installation:

1. Select a site - Choose a proper place for your SMC2652W

Access point. In general, the best location to place the access

point is at the centre of your wireless coverage area, within

line of sight to all your mobile stations.

2. Attach the Antenna - Screw the antenna into the antenna

connector (ANT) on the back panel. Normally, the higher you

place the antenna, the better the performance.

English

Applications

The EZ Connect Wireless products offer a fast, reliable and cost

effective solution for wireless client access to the network in

applications such as:

•Remote access to corporate network information - Email,

file transfer and terminal emulation

•Difficult to wire environments - Old buildings and open areas

where wiring is difficult

•Frequency changing environments - Retailers, manufacturers

and banks who frequently rearrange the workplace and

change location.

•Temporary LANS for special projects - Trade shows, exhibitions

and construction sites which need temporary set up for a short

time period.

•Home users - Home users and people who work from home who

need easy and quick installation of a small computer network.

LED Indicators

The EZ Connect Wireless Access point includes five status LED

indicators, as shown below.

USER GUIDE 2652W_UK.qxd 5/4/01 11:08 am Page 5

Windows NT/95/98/2000 Installation

1. Insert the SMC2652W utility disk into the floppy drive on your

PC and then enter the following command: “A:\utility\setup”.

Follow the on-screen instructions to install the utility program.

2. When you run the installed utility, click on “AP” and then

select “scan” from the menu. The program will then detect all

the SMC2652Ws wired to the Ethernet network.

3. from the list of detected SMC2652W’s, select and double click

on the unit you want to configure. The web browser page will

appear as follows:

4. enter the user name “default” and the password “WLAN_AP”.

This will take you to the home page.

5. Click on “AP information MIB”, “AP control MIB”,”TCP/IP

settings” or “change password” to select the page required.

3. Connect the Ethernet cable - The SC2652W can be wired to a

10Base-T Ethernet network with a network device such as a hub

or switch. Connect into the RJ45 connector socket on the back

panel with category 3, 4 or 5 UTP Ethernet cable and an

RJ45 connector.

4. Connect the power cable - Connect the power adapter cable to

the 9V DC power socket on the rear panel.

Warning: ONLY USE the power adapter supplied with the

SMC2652W. otherwise, the product may be damaged.

Configuration

Your SMC2652W is a plug and Play device. This means that you do

not need to configure it in most cases. If you are adding this

devices into an already existing wireless network, or if you need to

configure some advanced settings, follow the instructions below.

The diskette labelled “Utility Diskette” that comes with the

package contains a utility program for the EZ Connect Wireless

Access Point. Any updates can be downloaded from SMC’s website

(www.smc.com)

Warning: back up your utility diskette and se the copy

as a working diskette to protect the original from

accidental damage.

The SMC2652W can be configured over an Ethernet network using

RJ45 cable. You may connect the SMC2652W to a network device

such as a hub or switch. Then, run the utility program and

configure the SMC2652W remotely as described below.

English

USER GUIDE 2652W_UK.qxd 5/4/01 11:08 am Page 7

The information MIB screen displays the categories of information

shown above.

In the “AP control MIB page”, set the parameters and then double

click on “apply” to implement the settings.

DS channel - Set the channel number as the operating

radio channel.

Note: the available channel settings are displayed to the right of

the “DS channel” field. Local regulations determine which

channels are available.

FCC/IC: 1-11. ETSI:1-13, france:10-13, Spain:10-11, MKK: 1-14.

SSID: This should be set to the same value as other stations in

your network. (default: “Wlan”)

RTS Threshold: et the RTS threshold to the same as that used

by other devices in your network. (default:2305, which

means disabled)

Encryption: Click Encryption icon for the WEP setting.

WEP: For more secure data transmission, set the “WEP” to

“Wep_128” or “WEP_64” to ensure wireless network security.

The advanced wired equivelant privacy (WEP) is implemented in this

device to prevent unauthorised access. The 128 bit setting gives a

higher level of security but the setting must be the same as other

clients in your wireless network. (default: disabled)

English

USER GUIDE 2652W_UK.qxd 5/4/01 11:08 am Page 9

Key entry - This field can be set to “passphrase” or “manual

Entry”. Select “Entry”. The “passphrase” means the key elements

will be auto generated by the internal algorithym according the

string defined in the passphrase field. The “Manual Entry” means

the key elements allow/need user key in by manually. (2

hexadecimal digitals in each block)

Passphrase - The security key for WEP encryption is generated

from your Passphrase string, so it should be the same as all the

otherstations in your network.

64-Bit manual Entry:

Key1-4 - each key ID contains 10 HEX digits. All wireless devices

must have the same key ID elements values to communicate.

Key ID - Choose the Key ID that has the encryption string you

prefer. All wireless devices must have the same Key ID element

values to communicate.

Key 1 - Key ID value contains 26 HEX digits. All wireless devices

must have the same key ID element values to communicate.

The TCP/IP settings page allows you to view and change the

network settings on the access point.

With DHCP “ON”, the IP address and subnet are set automatically.

If you want to set these yourself, enter a new IP address and

subnet mask in the “New settings” section of the “TCP/IP settings”

screen, then click on “Apply”.

In the change password screen you may change the password on

the access point. As password is required to configure the

SMC2652W Access point. We suggest changing your password

from the default to ensure network security.

English

USER GUIDE 2652W_UK.qxd 5/4/01 11:08 am Page 11

English

EZ Connect Wireless Network Configuration and Planning

SMC’s EZ Connect Wireless Solution supports a stand-alone wireless

network configuration, as well as anintegrated configuration with

10 Mbps Ethernet LANs.

The SMC2652W PCI adapter can be configured as:

•Ad hoc for departmental or SOHO LANs

•Infrastructure for enterprise LANs

Network Topologies

Ad hoc Wireless LAN

An ad hoc wireless LAN consists of a group of computers, each

equipped with a wireless adapter, connected via radio signals as an

independent wireless LAN. Computers in a specific ad hoc wireless

LAN must therefore be configured to the same radio channel.

An ad hoc wireless LAN can be used for a branch office or

SOHO operation.

Infrastructure Wireless LAN

The SMC2652W can also provide access to a wired LAN for wireless

workstations. An integrated wired and wireless LAN is called an

Infrastructure configuration. A Basic Service Set (BSS) consists of

a group of wireless PC users, and an access point that is directly

connected to the wired LAN. Each wireless PC in this BSS can talk

to any computer in its wireless group via a radio link, or access

other computers or network resources in the wired LAN

infrastructure via the access point.

The infrastructure configuration not only extends the accessibility

of wireless PCs to the wired LAN, but also doubles the effective

wireless transmission range for wireless PCs by passing their signal

through one or more access points.

A wireless infrastructure can be used for access to a central

database, or for connection between mobile workers, as shown in

the following figure.

USER GUIDE 2652W_UK.qxd 5/4/01 11:08 am Page 13

English

Trouble shooting:

Check the following items before contacting SMC technical support.

1. If the mobile users do not have roaming access to the

SMC2652W access point, check the following:

a. Make sure that all the SMC2652W’s and stations in the ESS in

which the WLAN mobile users can roam are configured to the

same WEPsetings, SSID and authentication algorithm.

2. If the SMC2652W cannot be configured using the web browser:

a. Power down the the AP

i. Push in the reset button located on the back of

the SMC2652W.

ii. While holding in the button, apply power to the AP

iii. Wait until both the RF activity LED and the RF link

LED both start to flash on and off together.

iv. Rlease the push button and the LED’s will turn off.

You are now in the control mode.

v. Select the desired function by pressing the reset button

(Note: hold the button until the LED’s change to the the

next configuration)

Link Activity Function

Off Off No action, will boot normally

Off ON Revert to factory default settings

On Off Force boot from primary code image

On On No action, will boot normally.

Setting the Communication Domain

Stationary Wireless PCs The Basic Service Set (BSS) is the

communication domain for each SMC2652W access point. For

wireless PCs that do not need to support roaming, set the domain

identifier (SSID) for the wireless card to the BSS ID of the access

point you want to connect to. Check with your administrator for

the BSS ID of the SMC2652W access point he wants you to connect

to. Roaming Wireless PCs

A wireless infrastructure can also support roaming for mobile

workers. More than one access point can be configured to create

an Extended Service Set (ESS). By placing the access points so

that a continuous coverage area is created, wireless users within

this ESS can roam freely.

Before setting up an ESS for roaming, you need to choose a clear

radio channel and ideal location for the SMC2652W access points

to maximize performance.

USER GUIDE 2652W_UK.qxd 5/4/01 11:08 am Page 15

English

SPECIFICATIONS

Model SMC2652W

Maximum channels ETSI: 13

Maximum clients 128

Operating range

Cell seperation 30M between access points

(for roaming clients)

Data Rate 1, 2, 5.5, 11Mbps per channel

Network configuration Lan to access point to wireless card,

access point to wireless card.

Operating Frequency ETSI: 2.400-2.4835 GHz.

Sensitivity 1, 2, 5.5 Mbps - 80dBm,

11Mbps: -76dBm typical.

Modulation CCK, BPSK, QPSK

Power supply Input: 100-240 AC, 50-60Hz

Output: 9VDC, 1A

Output power + 13 dBm minimum

Physical size 13 x 18 x 4 cm

Weight 365 grams

LED indicators Power, Ethernet link, Ethernet activity,

Wireless link and Wireless activity.

Network management HTML web-browser interface,

Windows 95/98/NT/2000

Temperature Operating: 0 to 50 C

Storage: 0 to 70 C

Humidity 5% to 8% (non condensing)

Compliances CE mark - EN55022 Class B, EN55024,

IEC 61000-42/3/4/6/11

Emissions FCC Part 15(B), ETS 300 328, RCR STD-33A

Safety CSA/NTRL (CSA 22.2 No. 950 & UL 1950)

EN60950 (TUV/GS)

Vibration/Shock IEC 68-2-34/IEC 68-2-32

Standards IEEE 802.3 10baseT, IEEE 802.11b

Warranty Limited lifetime.

The function changes to the next in sequence every time the

push button is pressed. The pattern repaeats

(Function: 0,1,2,3,0,1,2,3,0,....) as the push button is

pressed repeatedly.

Control mode is automatically exited when the AP has not

detected any push button preeses for approx. 3 seconds.

At that point it will flash both LED’s twice, indicating it is

proceeding with the boot.

USER GUIDE 2652W_UK.qxd 5/4/01 11:08 am Page 17

English

Information furnished by SMC brand is believed to be accurate and

reliable.However,no responsibility is assumed by SMC for its use,

nor for any infringements of patents or other rights of third parties

which may result from its use.No license is granted by implication

or otherwise under any patent or patents by SMC.SMC reserves the

right to change specifications at any time without notice.

Trademarks

SMC is a registered trademark. Other product and company names

are trademarks or registered trademarks of their respective holders.

Warranty

Complete warranty information for all SMC products is available on

the SMC web site at http//www.smc-europe.com.

EC Conformance Declaration

The information technology products comply with ISO/IEC Guide

22 and EN4501.They conform to the following specifications:

EMC:EN55022 (1988)/CISPR-22(1985)Class A/Class B

EN50082-1:IEC 1000-4-2/3/4/6

These information technology products comply with the

requirements of the LOW Voltage Directive 73/23/EC and the EMC

directive 89/336/EEC.

07/00

USER GUIDE 2652W_UK.qxd 5/4/01 11:08 am Page 19

Otros manuales para EZ Connect SMC2652W

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Punto de acceso inalámbrico de SMC Networks

SMC Networks

SMC Networks ElliteConnect SMC2888W Manual de usuario

SMC Networks

SMC Networks SMC2890W-AN Manual de programación

SMC Networks

SMC Networks 2552W-G FICHE Guía de instalación

SMC Networks

SMC Networks SMCDPCR-AP Manual de usuario

SMC Networks

SMC Networks EliteConnect SMC2555W-AG Manual de usuario

SMC Networks

SMC Networks EZ Connect SMC2655W Manual de usuario

SMC Networks

SMC Networks EliteConnect SMC2555W-AG Manual de usuario

SMC Networks

SMC Networks EliteConnect SMC2891W-AG Manual de usuario

SMC Networks

SMC Networks EliteConnect SMCE21011 Manual de usuario

SMC Networks

SMC Networks EZ Connect Manual de usuario

SMC Networks

SMC Networks EliteConnect SMC2586W-G Manual de usuario

SMC Networks

SMC Networks 2655W FICHE Manual de usuario

SMC Networks

SMC Networks 2552W-G2 Manual de usuario

SMC Networks

SMC Networks EliteConnect SMC2555W-AG Manual de usuario

SMC Networks

SMC Networks EZ Connect Turbo SMC2455W Manual de usuario

SMC Networks

SMC Networks SMCWEB-N Manual de usuario

SMC Networks

SMC Networks 2682W FICHE Manual de usuario

SMC Networks

SMC Networks EZ Connect SMC2652W Manual de usuario

SMC Networks

SMC Networks EZ Connect SMCWEB-N Manual de usuario

SMC Networks

SMC Networks 2655W FICHE Manual de usuario

SMC Networks

SMC Networks SMC2891W-AN Manual de usuario

SMC Networks

SMC Networks WAP3110-L Manual de usuario

SMC Networks

SMC Networks EZ Connect Turbo SMC2455W Manual de usuario

SMC Networks

SMC Networks 2552W-G FICHE Manual de usuario

Manuales populares de Punto de acceso inalámbrico de otras marcas

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manual de usuario

Ubiquiti

Ubiquiti NanoStation NSM2 Manual de usuario

Cisco

Cisco Aironet 1550 Series Manual de usuario

Aruba

Aruba IAP-335 Manual de usuario

Advantek Networks

Advantek Networks AWN-AP-54MR Manual de usuario

IP-COM

IP-COM AP355 Manual de usuario

Buffalo

Buffalo AirStation WLA-L11G Manual de usuario

EnGenius

EnGenius EnStationACv2 Manual de usuario

D-Link

D-Link DAP-3662 Manual de usuario

xG Technology

xG Technology xMax CN1300 Manual de usuario

Widelink

Widelink ezWave WAP-1100 Series Manual de usuario

Edimax

Edimax CAP1200 Manual de usuario

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manual de usuario

Aruba

Aruba AP-203R Manual de usuario

LuXout Shades

LuXout Shades LUXSHADE MOTION Manual de usuario

CreatComm

CreatComm TB5F Manual de usuario

SineDigital

SineDigital MW-1500AP(H) Manual de usuario

TP-Link

TP-Link AP9650 V1 Manual de usuario