Smartwares C794IP Manual de usuario
Wireless Pan/Tilt APP Camera
Installation and Operating Instructions
Model: C794IP
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT
AND KEEP THIS MANUAL FOR FUTURE REFERENCE.
1
CONTENTS
Overview ......................................................................................................... 2
Please Read Before You Start ..................................................................................3
Wireless Device Operating Range ............................................................................3
Important Safety Precautions....................................................................................3
Getting Started ............................................................................................... 5
Kit Content................................................................................................................5
Safety and Installation Tips .......................................................................................6
Product Overview .....................................................................................................7
Installation ................................................................................................................8
Setup Your Camera......................................................................................... 9
APP Introduction .......................................................................................... 12
Live View / Snapshot / Recording ...........................................................................12
View Your Videos....................................................................................................15
Playback.................................................................................................................15
Main Page Overview...............................................................................................19
Advanced Setting....................................................................................................24
Trouble Shooting ......................................................................................... 31
Product Specication .................................................................................. 33
Storage Media Management ......................................................................... 34
Camera Siren Test Report ........................................................................... 34
Appendix: Compatible List ........................................................................ 35
2
OVERVIEW
The C794IP camera is capable of delivering high quality Digital High Definition (HD) video to your
smart-mobile device(s), which would require higher internet bandwidth. Due to your local
internet environment condition, your mobile device(s) may display black-screen or temporary
disconnect to the C794IP camera.
*Make sure the C794IP camera is operating with sufficient internet bandwidth, 1Mbps (upload/
download speed) is suggested.
*For best performance, the smart-mobile device(s) need to be on Wi-Fi or 4G mobile network
in order to receive maximum download speed.
*When the internet transmission is low, the app will automatically switch to Relay
Mode:
‧By adjusting to “Better Streaming” in the system setting section may improve the
APP performance.
*Your internet bandwidth is limited. For best performance, avoid more than two users
connecting to the C794IP camera simultaneously.
*Make sure your smart-mobile device(s) is equipped with up-to-date technology, 1.5GHz dual
core processor or equivalent is suggested.
*If the signal strength of your Wi-Fi router is weak, there are several ways to improve range:
‧Change router/camera relative position to receive better signal.
‧Use wire Ethernet cable on the C794IP camera to establish connection between
C794IP camera and your router.
‧Use Wi-Fi repeater/extender to maximize the service range of your Wi-Fi route.
‧Switch your router to 11b/11g mode in order to improve router service range.
‧Purchase extension cable or high gain antenna for your camera from the C794IP
vendor.
* Please make sure the memory card used is CLASS10 rated.
3
IMPORTANT SAFETY PRECAUTIONS
Damages caused by non-compliance with this operating manual will void the warranty!We will
not assume any liability for damages to items or persons caused by improperhandling or non-
compliance with the safety notices! Any warranty claim will be null andvoid in such cases.
1. Do not drop, puncture or disassemble the camera; otherwise the warranty will bevoided.
2. Avoid all contact with water, and dry hands before using.
3. Never tug on the power cords. Use the plug to unplug it from the wall outlet.
4. Do not expose the camera to high temperature or leave it in direct sunlight. Doingsomay
damage the camera or cause camera temporary malfunction.
5. Use the devices with care. Avoid pressing hard on the camera body.
6. For your own safety, avoid using the camera or power off the camera when thereisastorm or
lightning.
7. Remove the power adapter during long periods between usages.
8. Use only the accessories and power adapters supplied by the manufacturer.
9. To meet the regulations pertaining to parental responsibility, keep the devices out ofthe reach of
infants.
10. Check power cables, do not get crushed or damaged by sharp edges whenever thedevices are
in operation.
PLEASE READ BEFORE YOU START
Always use discretion when installing CCTV equipment, especially when there isperceived policy.
Enquire relevant local regulations applicable to the lawful installationof video recording/surveillance.
Third party consent may be required.
WIRELESS DEVICES OPERATING RANGE
Ensure the signal reception viewed from the wireless camera(s) is the best possiblereception
between the camera(s) and the Wi-Fi router. If necessary, reduce thedistance between the
camera(s) and the Wi-Fi router to improve overall systemperformance. Wireless Color Camera
Recordable CCTV Kit operating on a securedigital 2.4GHz frequency which could greatly reduce
interference from product suchas wireless routers, cordless phones or microwave ovens.
4
FCC/CE WARNING
This equipment has been tested and found to comply with limits for a Class B digital device,
pursuant to Part 15 of the FCC rules and ETSI(EN) 300328. These limits are designed to provide
reasonable protection against harmful interference in residential installations. This equipment
generates, uses, and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this equipment causes interference to radio or
television equipment reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•Reorient or relocate the receiving antenna.
•Move the equipment away from the receiver.
•Plug the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/television technician for additionalsuggestions.
You are cautioned that any change or modications to the equipment not expressly
approved by the party responsible for compliance could void your authority to operate
such equipment.
DISPOSAL
If the camera system no longer functions or can no longer be repaired, it must be
disposed of according to the valid statutory regulations.
Disposal of spent batteries/accumulators:
You are required by law (Battery Ordinance) to return all spent batteries and
accumulators. Disposing of spent batteries/accumulators with common household waste is
prohibited! Batteries/accumulators that contain hazardous substances are marked with the symbols
on the side. These symbols indicate that it is prohibited to dispose of these batteries/accumulators
in the household waste. The abbreviations for the respective heavy metals are: Cd=cadmium,
Hg=mercury, Pb=lead. You can return spent batteries and accumulators that can no longer be
charged to the designated collection points in your community, outlets or wherever batteries or
accumulators are sold. Following these instructions will allow you to fulll the legal requirements
and contribute to the protection of our environment!
FCC Compliance Statement: This
device complies with Part 15 of the
FCC rules. Operation is subjected to
the following two conditions: (1)this
device may not cause harmful interference,and (2) this
device must accept any interferencereceived, including
interference that may causeundesired operation.
Products with CE Marking comply
withEMC Directive (2004/108/EC);
LowVoltage Directive (2006/95/
EC);RED(2014/53/EU); ROHS
Directive(2011/65/EU) issued by the Commission
of theEuropean Community. Compliance with
thesedirectives implies conformity to the following
European Norms:
EMC: EN 301 489
LVD: EN 60950
Radio: EN 300 328
5
For best system performance:
- iOS: iPhone5 / iPad2 / Mini iPad with iOS 7.0 or above.
- Android: 1.5G dual core processor dual core procesor with 1G Ram or above.
- Storage: Class 10 memory card.
- Bandwidth: 1Mbps or above upload/download speed suggested.
Wireless App Camera
Camera Antenna
Quick Start Guide
Ethernet cable
Power Adapter
x 1
x 1
x 1
x 1
Tools Required:
‧Electric drill
‧5mm masonry drill bit
‧15mm masonry drill bit
‧No. 2 Philips screwdriver
x 1
KIT CONTENT
6
SAFETY AND INSTALLATION TIPS
Do not attempt to open the units with the power adaptor plug connected to avoid any risk of
personal injury.
When installing CCTV camera(s), always follow manufacturer's advice when using power tools,
steps, ladders, etc. and wear suitable protective equipment (e.g. safety goggles) when drilling
holes. Before drilling holes through walls, check for hidden electricity cables and water pipes. The
use of cable/pipe detector is advisable.
To avoid exposing any cameras to extreme weather conditions (e.g., under a gutter which is prone
to any water leaks). When installing any cameras with this unit, to use cable conduit to protect any
video/power extension cables from being exposed externally and to prevent/reduce the chances of
the cables being tampered with. After drilling any hole though an external wall for a cable, ensure
the hole is sealed up around the cable using a sealant to prevent drafts.
To prevent a re or electrical shock hazard, do not attempt to open the housing while the unit is
exposed to rain, water or wet conditions. There are no user serviceable parts inside. Refer servicing
to qualied service personnel. Avoid pointing the camera(s) directly at the sun or any bushes, tree
branches or moving objects that might unnecessarily cause the camera to record.
7
PRODUCT OVERVIEW
Light Sensor
Lan Port
Reset
Antenna
Microphone
LENS
Micro SD Card Slot
Power LED
Power Jack
LED INDICATOR
STATUS DESCRIPTION
Power On Power on the camera and wait until the GREEN LED indicator
becomes steady on. This process would be finished within 45
seconds and make sure the LED is ashing in GREEN.
Soft AP Green LED ashes once followed by 2 short ashes.
Reset factory under Soft
AP
Green LED ashes quicly
Default Reset Green LED ashes quicly
Update Firmware Green LED ashes quicly
Start Recording Video Green LED ashes once
8
INSTALLATION
1. Place the mounting bracket on the mounting surface as a pattern to mark the holes.
2. Drill the mounting holes and use the wall plug screws to secure the bracket to the wall.
3. Fasten the camera to the bracket using the tapping screws.
4. Hang the camera and plate onto the hanger screws. Arrange cable properly so that it will not
block pan/tile operation.
△
BEFORE YOU START
‧Before connecting the camera to power source, rst connect the camera to your Wi-Fi router
by using the Ethernet cable provided.
‧ After the camera is connected to the Wi-Fi router, connect the camera to power source and
wait until GREEN LED begin ashing. DO NOT begin the setup process until the GREEN
LED begin ashing that indicated the camera is rea (roughly 45 seconds).
‧Please follow the steps in the following pages to complete the setup.
Steady ON
Steady ON
9
For iOS For Android
Steady ON
Power Adapter
SETUP YOUR CAMERA
Follow the instructions below to help congure your camera for initial use.
1. APP download
Download and install the "OMGuard HD" APP to your device.
2. Poweron the camera
Power on the camera and wait until the GREEN LED indicator becomes steady on. This process
would be nished within 45 seconds and make sure the LED is ashing in GREEN.
3. Add camera
1. Connect your smartphone to the WiFi network that you want your camera to connect to.
2. Launch the APP, tap "+" to add the camera.
3. Scan the QR code label on the back of the camera to bring up the DID information. Or tap
"Search" to locate the camera. The APP will search available camera(s) connecting to the Wi-Fi
router and display the camera information in the pop up list.
4. Enter the default password 123456 and save the settings. Later, APP will request user to modify
default password to private password.
Tabla de contenidos
Otros manuales de Cámara digital de Smartwares
