SMART-AVI 4K-WALL Manual de usuario
4K-WALL
USER MANUAL
The ideal video wall controller and video matrix hardware solution with
On Screen Display and stunning 4K resolution, no software required
HDMI/DVI 2x2 Video Wall Controller and
4x4 Matrix Switch
PART NO. QTY. DESCRIPTION
SM-4KWL-S 1
4X4 Port HDMI, Real-Time Matrix with
integrated ideo wall
Includes: [SM-4KWL]
Power supply cord 1 (CCPWR06)
RS-232 Cable 1 RS-232 (male-to-female)
SRC-2A 1 IR Remote Control
SM-EYE 1 IR recei er
INTRODUCTION & FEATURES 3
TECHNICAL SPECIFICATIONS 4
APPLICATIONS 5
HARDWARE INSTALLATION 6
USING THE FRONT PANEL CONTROL 7
ON-SCREEN DISPLAY 8
USING THE TCP/IP CONTROL 11
FIRMWARE UPDATE 12
LIMITED WARRANTY STATEMENT 14
USING IR REMOTE CONTROL 8
USING RS-232 CONTROL 9
TABLE OF CONTENTS
WHAT’S IN THE BOX?
2
INTRODUCTION
To create a four-screen ideo wall with four HD ideo inputs, the 4K-Wall
ideo wall controller and matrix pro ides a truly simple plug-and-play hard-
ware solution with incredible 4K resolution. With four inputs and four out-
puts, users can arrange their content in numerous ways, pro iding unique
functionality by combining the abilities of a ideo wall hardware controller
and a matrix. The 4K-Wall is HDCP compliant.
Users can stretch one large image o er four screens, send an input to each
screen, send four images to each screen or create a customizable Picture-
in-Picture display. Better still, there’s no software required, as all content
management options are effortlessly controlled ia the 4K-Wall ideo wall
controller unit itself. There’s no need for dri ers or updates, just connect
the HD inputs and HD screens to the controller and it’s ready to go.
FEATURES
• Stand-Alone Unit, Requiring no Additional Hardware or Software
• Plug-and-play ready
• Four HDMI inputs and four HDMI outputs
• DVI-D up to 1920x1200 input
• Learns any EDID
• Internal EDID database
• Multiple configurations
• Easy control and access
• HDCP and HDMI 1.4 compliant
• Supports IR and RS-232
• 4K2K/3840x2160 total (with 1920x1080 monitors)
3
TECHNICAL SPECIFICATIONS
VIDEO
Video Bandwidth Single-link 340MHz [10.2Gbps]
Resolution HDTV 480i,480p,720i,720p,1080i,1080p
PC Resolution 800 x 600 up to 1920 x 1200
Input Video Signal 1.2 olts
Input DDC Signal 5 olts
Single Link Range 1080p
Format HDMI 1.4
DVI Compliance Single-link DVI-D 2.0
Output Cable Length Up to 20 ft.
HDCP Compliance 1.0/2.0
Video Bandwidth Single-link 340MHz [10.2Gbps]
Input Interface (4) HDMI
Output Interface (4) HDMI
Connector Type A [19-pin female]
CONTROL
Front Panel Tact Switches
RS-232 DB9 (female)
IR Remote Control IR RC5
TCP/IP Optional Ethernet Control
POWER
Requirements Internal 100-240 VAC
Power Supply Appro als UL, CE, CSA, CEC, RoHS
MECHANICAL
Height 1.70 in. (1U)
Width 17 in. (431.8 mm.)
Depth 10.2 in. (259 mm.)
Weight 4.05 lbs. (1.84 kg.)
4
APPLICATION DIAGRAM
APPLICATIONS
• Corporate or Educational Presentations
• Airport Installations
• Wall Displays
• Digital Signage
• Dealer Rooms
• Control Rooms
• Shopping Centers
• Security
• Point-of-Sale
• Entertainment Venues
• Corporate Lobbies
• Restaurants
5
HARDWARE INSTALLATION
1. Turn off the 4K-Wall.
2. Connect the (4) HDMI inputs (i.e. PC, Blu-Ray Player, Digital Signage,
etc.) to the (4) HDMI INPUT ports of the 4k-Wall using HDMI cables.
3. Connect the (4) monitors to the (4) HDMI OUTPUT ports of the 4k-Wall
using HDMI cables for HDMI monitors and TVS, or HDMI-to-DVI adapt-
ers for DVI displays.
4. Connect the IR recei er to the IR input jack at the back of the 4k-Wall.
5. Optionally connect an RS-232 cable from PC to the RS-232 port of the
unit for additional control.
6. Turn on the 4k-Wall.
7. Wait for a few seconds for the unit to initialize.
AVAILABLE CONFIGURATIONS
There are four different configurations or modes that are easy to na igate
through with the 4k-Wall. Switching between the display modes is simple.
The front panel buttons, IR remote control, OSD, RS-232 console com-
mand, and TCP/IP can be used to switch between modes.
6
CONTROL USING THE FRONT PANEL
Front Panel Buttons
• To switch to Video Wall Mode, press the QUAD and MENU buttons si-
multaneously and then press the desired channel 1, 2, 3, or 4.
• To switch to Indi idual Mode:
1. Press the FULL button on the front control panel
2. Press the Output Channel (1, 2, 3, or 4).
3. Press the Input Channel (1, 2, 3, or 4).
Ex. Input 4 to output 2 = “FULL, 2, 4”
• To switch to Picture in Picture mode, press the PiP button and then
select the desired channel 1, 2, 3, or 4.
• To switch to Quad Mode, press the QUAD button and then select the
desired channel 1, 2, 3, or 4.
7
CONTROL USING ON-SCREEN DISPLAY (OSD)
On Screen Display (OSD) gi es users great flexi-
bility and ease of use when looking to manage
their ideo wall. It can be operated with the IR
Remote Control and through the Front Panel
Buttons.
IR REMOTE CONTROL
The 4K-Wall will only respond to the remote
control unit pro ided in the box. Below is the
list of commands on how to control using the
remote control:
DATA:
DATA:DATA:
DATA: Acti ates the OSD
Ch. DOWN:
Ch. DOWN:Ch. DOWN:
Ch. DOWN: Na igate down through the options
Ch. Up:
Ch. Up:Ch. Up:
Ch. Up: Na igate up through the options
Vol. +:
Vol. +:Vol. +:
Vol. +: Select
Vol.
Vol. Vol.
Vol. -
--
-:
::
: Back
ENTER:
ENTER:ENTER:
ENTER: Enter the command
ESC:
ESC:ESC:
ESC: Exit OSD
OSD CONTROL WITH FRONT PANEL
To change modes with the OSD simply na igate using the following buttons
on the front panel:
1:
1:1:
1: Down
2:
2:2:
2: Up
3:
3:3:
3: Back
4:
4:4:
4: Select
FULL:
FULL:FULL:
FULL: Enter
Simply scroll to the mode desired with the up or down button, select the
mode, select the appropriate channel and enter.
8
USING RS-232 CONTROL
The 4K-Wall may also be controlled ia RS-232 commands. This feature
requires an RS-232 card installed on your computer or a USB to RS-232
adapter. Below are instructions on how to properly create an RS-232 con-
nection between a PC the 4K-Wall
Establish a connection to 4K
Establish a connection to 4KEstablish a connection to 4K
Establish a connection to 4K-
--
-Wall:
Wall:Wall:
Wall:
1. Connect a straight-
through
male-
to-female RS-232 cable to the RS-
232
connector
on the PC.
2. Connect the other end of the cable to the RS-232 port of the 4K-Wall.
3. Power on the de ice.
Setting up the Terminal Application:
Setting up the Terminal Application:Setting up the Terminal Application:
Setting up the Terminal Application:
1. Run HyperTerminal on the
PC
(or use the terminal client of
y
our
choice).
2. Select the correct COM Port on the PC.
3. Use the following
settings
to
create
a
connection
to the
de ice:
115200
115200115200
115200
,
8
88
8
,
N
NN
N
, 1
11
1
.
(see
settings
on right).
4. Be sure that Flow Control is
None
.
9
USING RS-232 CONTROL (c ntinued)
There are two primary modes of operation for 4K-WALL:
Command Mode
and
CLI Mode
. When connecting to the 4K-WALL ia RS-232, it will start in
Command Mode (see Command Mode on p. ** for options). CLI Mode is a
more user- friendly way of operating the DVR16x16 and includes instruc-
tional menus. The following section details the use of the CLI Mode.
When you connect to the 4K-WALL to a computer ia an RS-232 connec-
tion, you will see the following screen on startup:
******4KWall v.1.20.1*******
build date Mar 7 2014 10:53:44
…
…
4KWall Initialization complete
CLI Mode:
CLI Mode: CLI Mode:
CLI Mode: To enter CLI Mode type “clion” followed by the <enter> key and
you will see the following prompt:
CLI enabled!
To display the 4K-WALL help menu type “?” then <enter> key:
4KWall v.1.20.1 CLI command list
=========================================================
i List system information
f Full f [Input] [Output]
q Quad q [USER]
p PiP p [Main Screen<1-4>]
v VideoWall
o Output o [ 1-1080P60 | 2-720P | 3-1080P30 ]
rEDID <1-4> Read a EDID for an input
wEDID <1-4/a> < 1-ACER P241w | 2-Gateway FHX2300 | 3-local moni-
tor>
reset Reset 4K-Wall
losd load osd image
? CLI command list
•
To see the list of inputs and the output mode, type “i” then <enter> key.
•
To read the EDID for an input, type in “rEDID N” then <enter>, where “N”
is the input channel (1 to 4).
•
To program an EDID to the inputs, type in “wEDID N M” then <enter>,
where “N” is the input channel (1 to 4, or a = all), and “M” is the EDID
mode.
Ex. “wEDID a 3” is to learn the EDID of the local monitor to all
inputs
•
To do a power reset on the 4K-Wall, type “reset” followed by <enter> key.
10
Otros manuales para 4K-WALL
1
Tabla de contenidos
Otros manuales de Conmutador de matriz de SMART-AVI
SMART-AVI
SMART-AVI MXWall-LT Manual de usuario
SMART-AVI
SMART-AVI HDR4X2 Manual de usuario
SMART-AVI
SMART-AVI MU-88 Manual de usuario
SMART-AVI
SMART-AVI SuperMatrix Manual de usuario
SMART-AVI
SMART-AVI HDR-8X8-XT Manual de usuario
SMART-AVI
SMART-AVI QWALL-HD Manual de usuario
SMART-AVI
SMART-AVI MXCORE Series Manual de usuario
SMART-AVI
SMART-AVI HDR-4x4-Plus Manual de usuario
SMART-AVI
SMART-AVI HDR-8X8-XT Manual de usuario
SMART-AVI
SMART-AVI HDR-ULTRA Manual de usuario
SMART-AVI
SMART-AVI CATXPro Manual de usuario
SMART-AVI
SMART-AVI SNV64X16S Manual de usuario
SMART-AVI
SMART-AVI HDR-4x4-Plus Manual de usuario
SMART-AVI
SMART-AVI MXU-88 Manual de usuario
SMART-AVI
SMART-AVI MU-88 Manual de usuario
SMART-AVI
SMART-AVI DVR-4X4 Manual de usuario
SMART-AVI
SMART-AVI HDR-4X2-Pro Manual de usuario
SMART-AVI
SMART-AVI VNET+2P Manual de usuario
SMART-AVI
SMART-AVI CATSwitch CSWP64X16S Manual de usuario
SMART-AVI
SMART-AVI CATSWITCH Manual de usuario
