SMART-AVI SuperMatrix Manual de usuario
U
ser
M
anua
l
S
uperMatrix
Multi-
f
ormat non-blockin
g
audio, video, RS-232
a
n
d
in
f
r
a
r
ed
d
i
st
ri
but
i
o
n m
at
rix
.
Controlled via so
f
tware, remote control or over the Internet
.
Copyright 2008 SmartAVI
Notice:
The information contained in this document is subject to change without notice. SmartAVI makes no
warranty of any kind with regard to this material, including but not limited to, implied warranties of
merchantability and fitness for any particular purpose.
SmartAVI will not be liable for errors contained herein or for incidental or consequential damages in
connection with the furnishing, performance or use of this material.
No part of this document may be photocopied, reproduced or translated into another language
without prior written consent from SmartAVI.
Table of Contents
Chapter 1: Introduction ................................................................................................................ 4
What’s in the Box ..................................................................................................................... 4
Overview .................................................................................................................................... 5
Applications ............................................................................................................................... 5
Chapter 2: Installation.................................................................................................................... 6
Connecting the SuperMatrix (Quick Start) ....................................................................... 6
Connecting the SuperMatrix (Detailed Instructions) .................................................... 7
Video and Audio Inputs .................................................................................................. 7
Connecting the Receivers (XTPro/XTAV)................................................................... 8
Connecting the Communication Cable...................................................................... 9
System Power ON.............................................................................................................. 10
Using IR Devices ................................................................................................................ 11
Connecting the RS232 Devices .................................................................................... 12
Connecting the Super Matrix to the HD Source ..................................................... 13
RJ45 Preparation ............................................................................................................... 14
Chapter 3: Software Installation and Operation................................................................... 16
The Matrix Panel ....................................................................................................................... 17
The Button Panel...................................................................................................................... 18
Macros.......................................................................................................................................... 19
Controlling with IR .................................................................................................................. 20
Controlling the SMTCP ........................................................................................................... 21
Chapter 4: Technical Information .............................................................................................. 23
Chapter 5: Communications Protocol ..................................................................................... 25
Chapter 5: Appendices.................................................................................................................. 26
What’s in the box:
Super Matrix A/V: Audio/Video Matrix over CAT5
QTY Item Part No.
1Component or UXGA + Audio over CAT5 8x8 Matrix with RS232 Control. Includes:
[SMX-AV0808, CCRS232MF6, SMP-SW and (CCPWR06US) or (CCPWR06EU] SMX-AV0808S
1Component or UXGA + Audio over CAT5 16x16 Matrix with RS232 Control. In-
cludes: [SMX-AV1616, CCRS232MF6, SMP-SW and (CCPWR06US) or (CCPWR06EU] SMX-AV1616S
1Component or UXGA + Audio over CAT5 32x16 matrix with RS232 control. In-
cludes: [SMX-AV3216, CCRS232MF6, SMP-SW and (CCPWR06US) or (CCPWR06EU] SMX-AV3216S
Super Matrix A/V+Data: Audio/Video+RS232/IR over CAT5
QTY Item Part No.
1Component or UXGA/Audio + RS232/IR over CAT5 8x8 matrix with RS232 control.
Includes: [SMX-AVD0808, CCRS232MF6, SMP-SW and (CCPWR06US) or (CCP-
WR06EU]
SMX-AVD0808S
1Component or UXGA/Audio + RS232/IR over CAT5 16x16 matrix with RS232
control. Includes: [SMX-AVD1616, CCRS232MF6, SMP-SW and (CCPWR06US) or
(CCPWR06EU]
SMX-AVD1616S
1Component or UXGA/Audio + RS232/IR over CAT5 32x16 matrix with RS232
control. Includes: [SMX-AVD3216, CCRS232MF6, SMP-SW and (CCPWR06US) or
(CCPWR06EU]
SMX-AVD3216S
Receivers and Accessories
Item Part No.
XTAV UXGA/Audio Receiver. Includes: [XTA-RX and (PS5VD1A)] XTA-RXS
XTPRO UXGA/Audio/RS232/IR Receiver with dual video output. Includes: [XTP-RX and (PS5-
VD1A)] XTP-RXS
XTPRO UXGA/Audio/RS232/IR Long Range Receiver with dual video output. Includes: [XTP-RXL
and (PS5VD1A)] XTP-RXLS
External infrared receiver; IR range of 10 to 30ft SM-EYE
IR emitter 6ft single LED SM-LED
TCP/IP Control. Includes: [SMTCP, (CCRS232MM ) and (PS5VD1A)] SM-TCPS
Handheld IR Remote Controller SM-RMT
Smart control application software providing source/destination selection, name editing, and mes-
saging. Included in all SmartAVI Matrix investments. SMP-SW
Chapter 1: Introduction
Overview
At times multiple AV signals need to be transferred to multiple nearby output monitors. The Super
Matrix allows multiple VGA/audio inputs to be routed to multiple outputs simultaneously, by way of
a direct connection into the router.
The Super Matrix is a high-quality switching matrix for VGA type signals. All signal formats are catered
for including VGA, SVGA, XGA, RGBHV and sync on green (SOG) applications. For ease of installation,
Standard VGA connectors (HD15 sockets) are used for the input as well as the output video signal. All
that is required is a standard pin-to-pin VGA cable to connect to the signal source.
Stereo audio can also be routed to multiple outputs. The audio can either be routed independently or
together with the video signal using the SmartControlPro software that is very easy to use.
Note: for maximum signal performance, use only high quality cable that has internal coaxial cable for
each color.
The units contain a very high bandwidth routing matrix for the Red, Green and Blue video channels.
Chapter 1: Introduction
Wall Displays
Audio Visual Presentation
Digital media
Shopping centers
Airports
Security
Dealer rooms
Point of sale
Control rooms
Hotels
Applications
Connecting the SuperMatrix (Quick Start)
Warning: As a precaution, we recommend that you disconnect all power cords and make sure that
all devices are turned off.
1. Connecting the video
connect all the video input at the SuperMatrix to all the sources. The SuperMatrix
used HD15 Male cable to support XVGA, Svideo, Components video and
Composite Video ( SmartAVI offers special Adaptors for most of the video type of
signals)
1. Connecting the Audio
connect all the audio input at the SuperMatrix to all the sources. The SuperMatrix
used .5mm JACK le cable to support analog audio ( SmartAVI offers special Adaptors
or most of audio video type of signals)
2. Connect all remotes unit receivers via Cat5 cable
3. Connect a serial cable from the RS-232 port on your computer to the RS-232 port located
on the back panel of the SuperMatrix unit.
4. Plug power cable into the SuperMatrix unit.
5. Install SmartControlPro software.
6. Power on the SuperMatrix.
Chapter 2: Installation
Connecting the SuperMatrix (Detailed Instructions)
Video and Audio Inputs
The video input for the SuperMatrix is a standard HD15 connection.
Connect all of the Input video sources to the back of the SuperMatrix unit.
Hint: You may want to label the input video connections so as not to lose track of where
the signal is coming from. Later on when the software is installed you will be able to give
each connection a name and the software will remember it for you. This way you can
switch the video connections without having to look at the physical connections on the
back of the unit. (You can also use the included page at the end of this manual in order
to keep track of the connections as you make them.)
The audio inputs for the SuperMatrix are standard 3.5 mm Stereo Mini plug connectors.
Connect all of the audio inputs to the back of the SuperMatrix unit. Many computer audio
sources use this standard connection but there is other equipment such as receivers, and
VCRs where a special adapter cable will be needed. Such as a 3.5mm mini plug to stereo
RCA cable.
Make sure that the audio and video are coming from the same source and are plugged the
same input number. For example, if the audio from one computer is connected to input 1,
then the video should also be connected to input 1.
Video and Audio Outputs
The video and audio connections for the SuperMatrix outputs are exactly the same. The only differ-
ence is that they are located on the left side of the back panel
Connect all of the external video monitors and corresponding speakers to the output
connections located on the back of the SuperMatrix unit.
Chapter 2: Installation
Optional
Connecting the Receiver: XTPro-RX
Connecting The Receiver
Connect CAT5 cable coming from the SuperMatrix to the back of the receiver.1.
Connect 1-2 display monitors to the VGA out connectors on the front of the receiver.2.
Connect 1-2 sets of external speakers to the audio output connections on the front of the3.
unit. (Standard 3.5mm stereo Mini plug)
Connecting the Receiver: XTAV-RX
Connecting The Receiver
Connect CAT5 cable coming from the SuperMatrix to the back of the receiver.1.
Connect 1-2 display monitors to the VGA out connectors on the front of the re-2.
ceiver.
Connect 1-2 sets of external speakers to the audio output connections on the front3.
of the unit. (Standard 3.5mm stereo Mini plug)
Chapter 2: Installation
Chapter 2: Installation
Connecting the Control Communication Cable: RS-232
Each unit can be controlled by a RS-232 port connected from the back of the chassis. The
SmartControlPro software will be used to control the units.
Connect the RS-232 cable the control computer by connecting the female RS-232 connector1.
into the male RS-232 connector of the PC. Turn the side screws so that it does not
accidentally become disconnected
Connect RS-232 cable connector to the male RS-232 connector on the back of the chassis.2.
RS-232
Chapter 2: Installation
SuperMatrix connection diagram
System Power ON
You are now ready to turn on the system. Make sure that all connections are plugged in and all
video monitors and speakers that you wish to use are connected.
Plug in the power cord to the back of the1. SuperMatrix unit. Connect this power cord to the
wall.
Turn computer on and make sure that the boot up process has completed.2.
Observe to see if LEDs are lit. The3. SuperMatrix unit has two. One of those LEDs is for the
power and the other is to indicate that the unit is functioning properly.
Power on all external monitors and speakers.4.
Tabla de contenidos
Otros manuales de Conmutador de matriz de SMART-AVI
SMART-AVI
SMART-AVI HDR-8X8-XT Manual de usuario
SMART-AVI
SMART-AVI MU-88 Manual de usuario
SMART-AVI
SMART-AVI CATXPro Manual de usuario
SMART-AVI
SMART-AVI MXU-88 Plus Manual de usuario
SMART-AVI
SMART-AVI HDR-8X8-XT Manual de usuario
SMART-AVI
SMART-AVI DVR-4X4 Manual de usuario
SMART-AVI
SMART-AVI DVR4X4S Manual de usuario
SMART-AVI
SMART-AVI HDR-4x4-Plus Manual de usuario
SMART-AVI
SMART-AVI SNV64X16S Manual de usuario
SMART-AVI
SMART-AVI 4K-WALL Manual de usuario
SMART-AVI
SMART-AVI CATSwitch CSWP64X16S Manual de usuario
SMART-AVI
SMART-AVI VNET+2P Manual de usuario
SMART-AVI
SMART-AVI HDR8X8 Manual de usuario
SMART-AVI
SMART-AVI HDR-ULTRA Manual de usuario
SMART-AVI
SMART-AVI MXU-88 Manual de usuario
SMART-AVI
SMART-AVI HDR-8X8-Plus Manual de usuario
SMART-AVI
SMART-AVI HDR-4x4-Plus Manual de usuario
SMART-AVI
SMART-AVI QWALL-HD Manual de usuario
SMART-AVI
SMART-AVI HDR-4X2-Pro Manual de usuario
SMART-AVI
SMART-AVI MXU-88 Manual de usuario
